Request 1488 (accepted)

libaacs.changes Changed

libaacs.spec Changed

libaacs-0.7.0.tar.bz2/ChangeLog -> libaacs-0.7.1.tar.bz2/ChangeLog Changed

libaacs-0.7.0.tar.bz2/Makefile.in -> libaacs-0.7.1.tar.bz2/Makefile.in Changed

@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,23 +14,51 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\\ \	*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs$$bs $$bs	*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -dEDm) skip_next=yes;; \
+      -JT) skip_next=yes;; \
     esac; \
-    test $$am__dry = yes; \
-  }
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -52,13 +79,19 @@
 host_triplet = @host@
 target_triplet = @target@
 subdir = .
-DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
-	$(top_srcdir)/configure \
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(top_srcdir)/configure $(am__configure_deps) \
+	$(srcdir)/config.h.in \
 	$(top_srcdir)/src/libaacs/aacs-version.h.in COPYING ChangeLog \
-	build-aux/config.guess build-aux/config.sub build-aux/depcomp \
-	build-aux/install-sh build-aux/ltmain.sh build-aux/missing \
-	build-aux/ylwrap
+	build-aux/compile build-aux/config.guess build-aux/config.sub \
+	build-aux/depcomp build-aux/install-sh build-aux/missing \
+	build-aux/ylwrap build-aux/ltmain.sh \
+	$(top_srcdir)/build-aux/compile \
+	$(top_srcdir)/build-aux/config.guess \
+	$(top_srcdir)/build-aux/config.sub \
+	$(top_srcdir)/build-aux/install-sh \
+	$(top_srcdir)/build-aux/ltmain.sh \
+	$(top_srcdir)/build-aux/missing
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/attributes.m4 \
 	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
@@ -72,15 +105,28 @@
 CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES = src/libaacs/aacs-version.h
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-	html-recursive info-recursive install-data-recursive \
-	install-dvi-recursive install-exec-recursive \
-	install-html-recursive install-info-recursive \
-	install-pdf-recursive install-ps-recursive install-recursive \
-	installcheck-recursive installdirs-recursive pdf-recursive \
-	ps-recursive uninstall-recursive
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
 am__can_run_installinfo = \
   case $$AM_UPDATE_INFO_DIR in \
     n|no|NO) false;; \
@@ -88,11 +134,33 @@
   esac
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
-	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
-	distdir dist dist-all distcheck
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	cscope distdir dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
+	$(LISP)config.h.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items$$0 = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
+CSCOPE = cscope
 DIST_SUBDIRS = $(SUBDIRS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
@@ -103,6 +171,7 @@
       && rm -rf "$(distdir)" \
       || { sleep 5 && rm -rf "$(distdir)"; }; \
   else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
 am__relativize = \
   dir0=`pwd`; \
   sed_first='s,^$^/*$/.*$$,\1,'; \
@@ -130,6 +199,7 @@
   reldir="$$dir2"
 GZIP_ENV = --best
 DIST_ARCHIVES = $(distdir).tar.bz2
+DIST_TARGETS = dist-bzip2
 distuninstallcheck_listfiles = find . -type f -print
 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
@@ -139,6 +209,7 @@
 AACS_VERSION_MINOR = @AACS_VERSION_MINOR@
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AR = @AR@
 AS = @AS@
 AUTOCONF = @AUTOCONF@
@@ -312,8 +383,8 @@
 $(am__aclocal_m4_deps):
 
 config.h: stamp-h1
-	@if test ! -f $@; then rm -f stamp-h1; else :; fi
-	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
+	@test -f $@ || rm -f stamp-h1
+	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
 
 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 	@rm -f stamp-h1
@@ -338,22 +409,25 @@
 	-rm -f libtool config.lt
 
 # This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --!k*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
 	dot_seen=no; \
 	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
 	  echo "Making $$target in $$subdir"; \
 	  if test "$$subdir" = "."; then \
 	    dot_seen=yes; \
@@ -368,57 +442,12 @@
 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 	fi; test -z "$$fail"
 
-$(RECURSIVE_CLEAN_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --!k*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
 
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files$$0 = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
@@ -434,12 +463,7 @@
 	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files$$0 = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	$(am__define_uniq_tagged_files); \
 	shift; \
 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
@@ -451,15 +475,11 @@
 	      $$unique; \
 	  fi; \
 	fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files$$0 = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
 	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$unique
@@ -468,9 +488,31 @@
 	here=`$(am__cd) $(top_builddir) && pwd` \
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+	test ! -s cscope.files \
+	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+	-rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  \\/* | ?:\\/*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
 
 distdir: $(DISTFILES)
 	$(am__remove_distdir)
@@ -538,39 +580,41 @@
 	|| chmod -R a+r "$(distdir)"
 dist-gzip: distdir
 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 dist-bzip2: distdir
 	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-lzip: distdir
 	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
-	$(am__remove_distdir)
-
-dist-lzma: distdir
-	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-xz: distdir
 	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-tarZ: distdir
+	@echo WARNING: "Support for shar distribution archives is" \
+	               "deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-shar: distdir
+	@echo WARNING: "Support for distribution archives compressed with" \
+		       "legacy program 'compress' is deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-zip: distdir
 	-rm -f $(distdir).zip
 	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
-dist dist-all: distdir
-	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
+dist dist-all:
+	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+	$(am__post_remove_distdir)
 
 # This target untars the dist file and tries a VPATH configuration.  Then
 # it guarantees that the distribution is self-contained by making another
@@ -581,8 +625,6 @@
 	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lzma*) \
-	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
 	*.tar.lz*) \
 	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
 	*.tar.xz*) \
@@ -594,18 +636,19 @@
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
 	esac
-	chmod -R a-w $(distdir); chmod u+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
+	chmod -R a-w $(distdir)
+	chmod u+w $(distdir)
+	mkdir $(distdir)/_build $(distdir)/_inst
 	chmod a-w $(distdir)
 	test -d $(distdir)/_build || exit 0; \
 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^^:\\/:\\/,/,'` \
 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 	  && am__cwd=`pwd` \
 	  && $(am__cd) $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	  && ../configure \
 	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	    --srcdir=.. --prefix="$$dc_install_base" \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
 	  && $(MAKE) $(AM_MAKEFLAGS) check \
@@ -628,7 +671,7 @@
 	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
 	  && cd "$$am__cwd" \
 	  || exit 1
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
@@ -763,24 +806,24 @@
 
 uninstall-am:
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
-	ctags-recursive install-am install-strip tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
-	all all-am am--refresh check check-am clean clean-generic \
-	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
-	dist-gzip dist-lzip dist-lzma dist-shar dist-tarZ dist-xz \
-	dist-zip distcheck distclean distclean-generic distclean-hdr \
-	distclean-libtool distclean-tags distcleancheck distdir \
-	distuninstallcheck dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	installdirs-am maintainer-clean maintainer-clean-generic \
-	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
-	ps ps-am tags tags-recursive uninstall uninstall-am
+.MAKE: $(am__recursive_targets) all install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+	am--refresh check check-am clean clean-cscope clean-generic \
+	clean-libtool cscope cscopelist-am ctags ctags-am dist \
+	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
+	dist-xz dist-zip distcheck distclean distclean-generic \
+	distclean-hdr distclean-libtool distclean-tags distcleancheck \
+	distdir distuninstallcheck dvi dvi-am html html-am info \
+	info-am install install-am install-data install-data-am \
+	install-dvi install-dvi-am install-exec install-exec-am \
+	install-html install-html-am install-info install-info-am \
+	install-man install-pdf install-pdf-am install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
+	uninstall-am
 
 
 clean-lex-yacc:

libaacs-0.7.0.tar.bz2/aclocal.m4 -> libaacs-0.7.1.tar.bz2/aclocal.m4 Changed

@@ -1,8 +1,7 @@
-# generated automatically by aclocal 1.11.6 -*- Autoconf -*-
+# generated automatically by aclocal 1.14.1 -*- Autoconf -*-
+
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation,
-# Inc.
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -12,33 +11,31 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
+m4_ifndef(AC_CONFIG_MACRO_DIRS, m4_defun(_AM_CONFIG_MACRO_DIRS, )m4_defun(AC_CONFIG_MACRO_DIRS, _AM_CONFIG_MACRO_DIRS($@)))
 m4_ifndef(AC_AUTOCONF_VERSION,
   m4_copy(m4_PACKAGE_VERSION, AC_AUTOCONF_VERSION))dnl
 m4_if(m4_defn(AC_AUTOCONF_VERSION), 2.69,,
 m4_warning(this file was generated for autoconf 2.69.
 You have another version of autoconf.  It may work, but is not guaranteed to.
 If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically `autoreconf'.))
+To do so, use the procedure documented by the package, typically 'autoreconf'.))
 
-# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 2002-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 1
-
 # AM_AUTOMAKE_VERSION(VERSION)
 # ----------------------------
 # Automake X.Y traces this macro to ensure aclocal.m4 has been
 # generated from the m4 files accompanying Automake X.Y.
 # (This private macro should not be called outside this file.)
 AC_DEFUN(AM_AUTOMAKE_VERSION,
-am__api_version='1.11'
+am__api_version='1.14'
 dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
 dnl require some minimum version.  Point them to the right macro.
-m4_if($1, 1.11.6, ,
+m4_if($1, 1.14.1, ,
       AC_FATAL(Do not call $0, use AM_INIT_AUTOMAKE($1).))dnl
 )
 
@@ -54,24 +51,22 @@
 # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
 # This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
 AC_DEFUN(AM_SET_CURRENT_AUTOMAKE_VERSION,
-AM_AUTOMAKE_VERSION(1.11.6)dnl
+AM_AUTOMAKE_VERSION(1.14.1)dnl
 m4_ifndef(AC_AUTOCONF_VERSION,
   m4_copy(m4_PACKAGE_VERSION, AC_AUTOCONF_VERSION))dnl
 _AM_AUTOCONF_VERSION(m4_defn(AC_AUTOCONF_VERSION)))
 
 # AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 
-# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc.
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 1
-
 # For projects using AC_CONFIG_AUX_DIR(foo), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+# $ac_aux_dir to '$srcdir/foo'.  In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
 #
 # Of course, Automake must honor this variable whenever it calls a
 # tool from the auxiliary directory.  The problem is that $srcdir (and
@@ -90,7 +85,7 @@
 #
 # The reason of the latter failure is that $top_srcdir and $ac_aux_dir
 # are both prefixed by $srcdir.  In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
+# harmless because $srcdir is '.', but things will broke when you
 # start a VPATH build or use an absolute $srcdir.
 #
 # So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
@@ -116,22 +111,19 @@
 
 # AM_CONDITIONAL                                            -*- Autoconf -*-
 
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
-# Free Software Foundation, Inc.
+# Copyright (C) 1997-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 9
-
 # AM_CONDITIONAL(NAME, SHELL-CONDITION)
 # -------------------------------------
 # Define a conditional.
 AC_DEFUN(AM_CONDITIONAL,
-AC_PREREQ(2.52)dnl
- ifelse($1, TRUE,  AC_FATAL($0: invalid condition: $1),
-	$1, FALSE, AC_FATAL($0: invalid condition: $1))dnl
+AC_PREREQ(2.52)dnl
+ m4_if($1, TRUE,  AC_FATAL($0: invalid condition: $1),
+       $1, FALSE, AC_FATAL($0: invalid condition: $1))dnl
 AC_SUBST($1_TRUE)dnl
 AC_SUBST($1_FALSE)dnl
 _AM_SUBST_NOTMAKE($1_TRUE)dnl
@@ -150,16 +142,14 @@
 Usually this means the macro was only invoked conditionally.)
 fi))
 
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009,
-# 2010, 2011 Free Software Foundation, Inc.
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 12
 
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
 # written in clear, in which case automake, when reading aclocal.m4,
 # will think it sees a *use*, and therefore will trigger all it's
 # C support machinery.  Also note that it means that autoscan, seeing
@@ -169,7 +159,7 @@
 # _AM_DEPENDENCIES(NAME)
 # ----------------------
 # See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
 # We try a few techniques and use that to set a single cache variable.
 #
 # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
@@ -182,12 +172,13 @@
 AC_REQUIRE(AM_MAKE_INCLUDE)dnl
 AC_REQUIRE(AM_DEP_TRACK)dnl
 
-ifelse($1, CC,   depcc="$CC"   am_compiler_list=,
-       $1, CXX,  depcc="$CXX"  am_compiler_list=,
-       $1, OBJC, depcc="$OBJC" am_compiler_list='gcc3 gcc',
-       $1, UPC,  depcc="$UPC"  am_compiler_list=,
-       $1, GCJ,  depcc="$GCJ"  am_compiler_list='gcc3 gcc',
-                   depcc="$$1"   am_compiler_list=)
+m4_if($1, CC,   depcc="$CC"   am_compiler_list=,
+      $1, CXX,  depcc="$CXX"  am_compiler_list=,
+      $1, OBJC, depcc="$OBJC" am_compiler_list='gcc3 gcc',
+      $1, OBJCXX, depcc="$OBJCXX" am_compiler_list='gcc3 gcc',
+      $1, UPC,  depcc="$UPC"  am_compiler_list=,
+      $1, GCJ,  depcc="$GCJ"  am_compiler_list='gcc3 gcc',
+                    depcc="$$1"   am_compiler_list=)
 
 AC_CACHE_CHECK(dependency style of $depcc,
                am_cv_$1_dependencies_compiler_type,
@@ -195,8 +186,8 @@
   # We make a subdir and do the tests there.  Otherwise we can end up
   # making bogus files that we don't know about and never remove.  For
   # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
   rm -rf conftest.dir
   mkdir conftest.dir
   # Copy depcomp to subdir because otherwise we won't find it if we're
@@ -236,16 +227,16 @@
     : > sub/conftest.c
     for i in 1 2 3 4 5 6; do
       echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
     # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
     am__obj=sub/conftest.${OBJEXT-o}
     am__minus_obj="-o $am__obj"
     case $depmode in
@@ -254,8 +245,8 @@
       test "$am__universal" = false || continue
       ;;
     nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
       if test "x$enable_dependency_tracking" = xyes; then
 	continue
       else
@@ -263,7 +254,7 @@
       fi
       ;;
     msvc7 | msvc7msys | msvisualcpp | msvcmsys)
-      # This compiler won't grok `-c -o', but also, the minuso test has
+      # This compiler won't grok '-c -o', but also, the minuso test has
       # not run yet.  These depmodes are late enough in the game, and
       # so weak that their functioning should not be impacted.
       am__obj=conftest.${OBJEXT-o}
@@ -311,7 +302,7 @@
 # AM_SET_DEPDIR
 # -------------
 # Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
 AC_DEFUN(AM_SET_DEPDIR,
 AC_REQUIRE(AM_SET_LEADING_DOT)dnl
 AC_SUBST(DEPDIR, "${am__leading_dot}deps")dnl
@@ -321,9 +312,13 @@
 # AM_DEP_TRACK
 # ------------
 AC_DEFUN(AM_DEP_TRACK,
-AC_ARG_ENABLE(dependency-tracking,
-  --disable-dependency-tracking  speeds up one-time build
-  --enable-dependency-tracking   do not reject slow dependency extractors)
+AC_ARG_ENABLE(dependency-tracking, dnl
+AS_HELP_STRING(
+  --enable-dependency-tracking,
+  do not reject slow dependency extractors)
+AS_HELP_STRING(
+  --disable-dependency-tracking,
+  speeds up one-time build))
 if test "x$enable_dependency_tracking" != xno; then
   am_depcomp="$ac_aux_dir/depcomp"
   AMDEPBACKSLASH='\'
@@ -338,20 +333,18 @@
 
 # Generate code to set up dependency tracking.              -*- Autoconf -*-
 
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-#serial 5
 
 # _AM_OUTPUT_DEPENDENCY_COMMANDS
 # ------------------------------
 AC_DEFUN(_AM_OUTPUT_DEPENDENCY_COMMANDS,
 {
-  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # Older Autoconf quotes --file arguments for eval, but not when files
   # are listed without --file.  Let's play safe and only enable the eval
   # if we detect the quoting.
   case $CONFIG_FILES in
@@ -364,7 +357,7 @@
     # Strip MF so we end up with the name of the file.
     mf=`echo "$mf" | sed -e 's/:.*$//'`
     # Check whether this is an Automake generated Makefile or not.
-    # We used to match only the files named `Makefile.in', but
+    # We used to match only the files named 'Makefile.in', but
     # some people rename them; so instead we look at the file content.
     # Grep'ing the first line is not enough: some people post-process
     # each Makefile.in and add a new line on top of each file to say so.
@@ -376,21 +369,19 @@
       continue
     fi
     # Extract the definition of DEPDIR, am__include, and am__quote
-    # from the Makefile without running `make'.
+    # from the Makefile without running 'make'.
     DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
     test -z "$DEPDIR" && continue
     am__include=`sed -n 's/^am__include = //p' < "$mf"`
-    test -z "am__include" && continue
+    test -z "$am__include" && continue
     am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-    # When using ansi2knr, U may be empty or an underscore; expand it
-    U=`sed -n 's/^U = //p' < "$mf"`
     # Find all dependency output files, they are included files with
     # $(DEPDIR) in their names.  We invoke sed twice because it is the
     # simplest approach to changing $(DEPDIR) to its actual value in the
     # expansion.
     for file in `sed -n "
       s/^$am__include $am__quote$.*(DEPDIR).*$$am__quote"'$/\1/p' <"$mf" | \
-	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
       # Make sure the directory exists.
       test -f "$dirpart/$file" && continue
       fdir=`AS_DIRNAME("$file")`
@@ -408,7 +399,7 @@
 # This macro should only be invoked once -- use via AC_REQUIRE.
 #
 # This code is only required when automatic dependency tracking
-# is enabled.  FIXME.  This creates each `.P' file that we will
+# is enabled.  FIXME.  This creates each '.P' file that we will
 # need in order to bootstrap the dependency handling code.
 AC_DEFUN(AM_OUTPUT_DEPENDENCY_COMMANDS,
 AC_CONFIG_COMMANDS(depfiles,
@@ -418,18 +409,21 @@
 
 # Do all the work for Automake.                             -*- Autoconf -*-
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 16
-
 # This macro actually does too much.  Some checks are only needed if
 # your package does certain things.  But this isn't really a big deal.
 
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define(AC_PROG_CC,
+m4_defn(AC_PROG_CC)
+_AM_PROG_CC_C_O
+)
+
 # AM_INIT_AUTOMAKE(PACKAGE, VERSION, NO-DEFINE)
 # AM_INIT_AUTOMAKE(OPTIONS)
 # -----------------------------------------------
@@ -442,7 +436,7 @@
 # arguments mandatory, and then we can depend on a new Autoconf
 # release and drop the old call support.
 AC_DEFUN(AM_INIT_AUTOMAKE,
-AC_PREREQ(2.62)dnl
+AC_PREREQ(2.65)dnl
 dnl Autoconf wants to disallow AM_ names.  We explicitly allow
 dnl the ones we care about.
 m4_pattern_allow(^AM_A-Z+FLAGS$)dnl
@@ -471,31 +465,40 @@
 # Define the identity of the package.
 dnl Distinguish between old-style and new-style calls.
 m4_ifval($2,
-m4_ifval($3, _AM_SET_OPTION(no-define))dnl
+AC_DIAGNOSE(obsolete,
+             $0: two- and three-arguments forms are deprecated.)
+m4_ifval($3, _AM_SET_OPTION(no-define))dnl
  AC_SUBST(PACKAGE, $1)dnl
  AC_SUBST(VERSION, $2),
 _AM_SET_OPTIONS($1)dnl
 dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(m4_ifdef(AC_PACKAGE_NAME, 1)m4_ifdef(AC_PACKAGE_VERSION, 1), 11,,
+m4_if(
+  m4_ifdef(AC_PACKAGE_NAME, ok):m4_ifdef(AC_PACKAGE_VERSION, ok),
+  ok:ok,,
   m4_fatal(AC_INIT should be called with package and version arguments))dnl
  AC_SUBST(PACKAGE, 'AC_PACKAGE_TARNAME')dnl
  AC_SUBST(VERSION, 'AC_PACKAGE_VERSION'))dnl
 
 _AM_IF_OPTION(no-define,,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", Name of package)
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", Version number of package))dnl
+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", Name of package)
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", Version number of package))dnl
 
 # Some tools Automake needs.
 AC_REQUIRE(AM_SANITY_CHECK)dnl
 AC_REQUIRE(AC_ARG_PROGRAM)dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
 AC_REQUIRE(AM_PROG_INSTALL_SH)dnl
 AC_REQUIRE(AM_PROG_INSTALL_STRIP)dnl
-AC_REQUIRE(AM_PROG_MKDIR_P)dnl
+AC_REQUIRE(AC_PROG_MKDIR_P)dnl
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+AC_SUBST(mkdir_p, '$(MKDIR_P)')
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
 AC_REQUIRE(AC_PROG_AWK)dnl
@@ -506,34 +509,78 @@
 			     _AM_PROG_TAR(v7)))
 _AM_IF_OPTION(no-dependencies,,
 AC_PROVIDE_IFELSE(AC_PROG_CC,
-		  _AM_DEPENDENCIES(CC),
-		  define(AC_PROG_CC,
-			  defn(AC_PROG_CC)_AM_DEPENDENCIES(CC)))dnl
+		  _AM_DEPENDENCIES(CC),
+		  m4_define(AC_PROG_CC,
+			     m4_defn(AC_PROG_CC)_AM_DEPENDENCIES(CC)))dnl
 AC_PROVIDE_IFELSE(AC_PROG_CXX,
-		  _AM_DEPENDENCIES(CXX),
-		  define(AC_PROG_CXX,
-			  defn(AC_PROG_CXX)_AM_DEPENDENCIES(CXX)))dnl
+		  _AM_DEPENDENCIES(CXX),
+		  m4_define(AC_PROG_CXX,
+			     m4_defn(AC_PROG_CXX)_AM_DEPENDENCIES(CXX)))dnl
 AC_PROVIDE_IFELSE(AC_PROG_OBJC,
-		  _AM_DEPENDENCIES(OBJC),
-		  define(AC_PROG_OBJC,
-			  defn(AC_PROG_OBJC)_AM_DEPENDENCIES(OBJC)))dnl
+		  _AM_DEPENDENCIES(OBJC),
+		  m4_define(AC_PROG_OBJC,
+			     m4_defn(AC_PROG_OBJC)_AM_DEPENDENCIES(OBJC)))dnl
+AC_PROVIDE_IFELSE(AC_PROG_OBJCXX,
+		  _AM_DEPENDENCIES(OBJCXX),
+		  m4_define(AC_PROG_OBJCXX,
+			     m4_defn(AC_PROG_OBJCXX)_AM_DEPENDENCIES(OBJCXX)))dnl
 )
-_AM_IF_OPTION(silent-rules, AC_REQUIRE(AM_SILENT_RULES))dnl
-dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
-dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_REQUIRE(AM_SILENT_RULES)dnl
+dnl The testsuite driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This
+dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
 AC_CONFIG_COMMANDS_PRE(dnl
 m4_provide_if(_AM_COMPILER_EXEEXT,
   AM_CONDITIONAL(am__EXEEXT, test -n "$EXEEXT")))dnl
-)
 
-dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    AC_MSG_ERROR(Your 'rm' program is bad, sorry.)
+  fi
+fi)
+
+dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
 dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
 dnl mangled by Autoconf and run in a shell conditional statement.
 m4_define(_AC_COMPILER_EXEEXT,
 m4_defn(_AC_COMPILER_EXEEXT)m4_provide(_AM_COMPILER_EXEEXT))
 
-
 # When config.status generates a header, we must update the stamp-h file.
 # This file resides in the same directory as the config header
 # that is generated.  The stamp files are numbered to have different names.
@@ -555,15 +602,12 @@
 done
 echo "timestamp for $_am_arg" >`AS_DIRNAME("$_am_arg")`/stamp-h$_am_stamp_count)
 
-# Copyright (C) 2001, 2003, 2005, 2008, 2011 Free Software Foundation,
-# Inc.
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 1
-
 # AM_PROG_INSTALL_SH
 # ------------------
 # Define $install_sh.
@@ -577,16 +621,14 @@
     install_sh="\${SHELL} $am_aux_dir/install-sh"
   esac
 fi
-AC_SUBST(install_sh))
+AC_SUBST(install_sh))
 
-# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2003-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 2
-
 # Check whether the underlying file-system supports filenames
 # with a leading dot.  For instance MS-DOS doesn't.
 AC_DEFUN(AM_SET_LEADING_DOT,
@@ -600,21 +642,18 @@
 rmdir .tst 2>/dev/null
 AC_SUBST(am__leading_dot))
 
-# Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2005
-# Free Software Foundation, Inc.
+# Copyright (C) 1998-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 5
-
 # AM_PROG_LEX
 # -----------
 # Autoconf leaves LEX=: if lex or flex can't be found.  Change that to a
 # "missing" invocation, for better error output.
 AC_DEFUN(AM_PROG_LEX,
-AC_PREREQ(2.50)dnl
+AC_PREREQ(2.50)dnl
 AC_REQUIRE(AM_MISSING_HAS_RUN)dnl
 AC_REQUIRE(AC_PROG_LEX)dnl
 if test "$LEX" = :; then
@@ -624,20 +663,17 @@
 # Add --enable-maintainer-mode option to configure.         -*- Autoconf -*-
 # From Jim Meyering
 
-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008,
-# 2011 Free Software Foundation, Inc.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 5
-
 # AM_MAINTAINER_MODE(DEFAULT-MODE)
 # ----------------------------------
 # Control maintainer-specific portions of Makefiles.
-# Default is to disable them, unless `enable' is passed literally.
-# For symmetry, `disable' may be passed as well.  Anyway, the user
+# Default is to disable them, unless 'enable' is passed literally.
+# For symmetry, 'disable' may be passed as well.  Anyway, the user
 # can override the default with the --enable/--disable switch.
 AC_DEFUN(AM_MAINTAINER_MODE,
 m4_case(m4_default($1, disable),
@@ -648,10 +684,11 @@
 AC_MSG_CHECKING(whether to enable maintainer-specific portions of Makefiles)
   dnl maintainer-mode's default is 'disable' unless 'enable' is passed
   AC_ARG_ENABLE(maintainer-mode,
-  --am_maintainer_other-maintainer-mode  am_maintainer_other make rules and dependencies not useful
-			  (and sometimes confusing) to the casual installer,
-      USE_MAINTAINER_MODE=$enableval,
-      USE_MAINTAINER_MODE=m4_if(am_maintainer_other, enable, no, yes))
+    AS_HELP_STRING(--am_maintainer_other-maintainer-mode,
+      am_maintainer_other make rules and dependencies not useful
+      (and sometimes confusing) to the casual installer),
+    USE_MAINTAINER_MODE=$enableval,
+    USE_MAINTAINER_MODE=m4_if(am_maintainer_other, enable, no, yes))
   AC_MSG_RESULT($USE_MAINTAINER_MODE)
   AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
   MAINT=$MAINTAINER_MODE_TRUE
@@ -659,18 +696,14 @@
 
 )
 
-AU_DEFUN(jm_MAINTAINER_MODE, AM_MAINTAINER_MODE)
-
 # Check to see how 'make' treats includes.	            -*- Autoconf -*-
 
-# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 4
-
 # AM_MAKE_INCLUDE()
 # -----------------
 # Check to see how make treats includes.
@@ -688,7 +721,7 @@
 _am_result=none
 # First try GNU make style include.
 echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
+# Ignore all kinds of additional output from 'make'.
 case `$am_make -s -f confmf 2> /dev/null` in #(
 *the\ am__doit\ target*)
   am__include=include
@@ -715,15 +748,12 @@
 
 # Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
 
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
+# Copyright (C) 1997-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 6
-
 # AM_MISSING_PROG(NAME, PROGRAM)
 # ------------------------------
 AC_DEFUN(AM_MISSING_PROG,
@@ -731,11 +761,10 @@
 $1=${$1-"${am_missing_run}$2"}
 AC_SUBST($1))
 
-
 # AM_MISSING_HAS_RUN
 # ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
+# Define MISSING if not defined so far and test if it is modern enough.
+# If it is, set am_missing_run to use it, otherwise, to nothing.
 AC_DEFUN(AM_MISSING_HAS_RUN,
 AC_REQUIRE(AM_AUX_DIR_EXPAND)dnl
 AC_REQUIRE_AUX_FILE(missing)dnl
@@ -748,54 +777,22 @@
   esac
 fi
 # Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
-  am_missing_run="$MISSING --run "
+if eval "$MISSING --is-lightweight"; then
+  am_missing_run="$MISSING "
 else
   am_missing_run=
-  AC_MSG_WARN(`missing' script is too old or missing)
+  AC_MSG_WARN('missing' script is too old or missing)
 fi
 )
 
-# Copyright (C) 2003, 2004, 2005, 2006, 2011 Free Software Foundation,
-# Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 1
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check for `mkdir -p'.
-AC_DEFUN(AM_PROG_MKDIR_P,
-AC_PREREQ(2.60)dnl
-AC_REQUIRE(AC_PROG_MKDIR_P)dnl
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST(mkdir_p, "$MKDIR_P")dnl
-case $mkdir_p in
-  \\/$* | ?:\\/*) ;;
-  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-)
-
 # Helper functions for option handling.                     -*- Autoconf -*-
 
-# Copyright (C) 2001, 2002, 2003, 2005, 2008, 2010 Free Software
-# Foundation, Inc.
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 5
-
 # _AM_MANGLE_OPTION(NAME)
 # -----------------------
 AC_DEFUN(_AM_MANGLE_OPTION,
@@ -805,7 +802,7 @@
 # --------------------
 # Set option NAME.  Presently that only means defining a flag for this option.
 AC_DEFUN(_AM_SET_OPTION,
-m4_define(_AM_MANGLE_OPTION($1), 1))
+m4_define(_AM_MANGLE_OPTION($1), 1))
 
 # _AM_SET_OPTIONS(OPTIONS)
 # ------------------------
@@ -819,24 +816,82 @@
 AC_DEFUN(_AM_IF_OPTION,
 m4_ifset(_AM_MANGLE_OPTION($1), $2, $3))
 
-# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_CC_C_O
+# ---------------
+# Like AC_PROG_CC_C_O, but changed for automake.  We rewrite AC_PROG_CC
+# to automatically call this.
+AC_DEFUN(_AM_PROG_CC_C_O,
+AC_REQUIRE(AM_AUX_DIR_EXPAND)dnl
+AC_REQUIRE_AUX_FILE(compile)dnl
+AC_LANG_PUSH(C)dnl
+AC_CACHE_CHECK(
+  whether $CC understands -c and -o together,
+  am_cv_prog_cc_c_o,
+  AC_LANG_CONFTEST(AC_LANG_PROGRAM())
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if AM_RUN_LOG($CC -c conftest.$ac_ext -o conftest2.$ac_objext) \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i)
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+AC_LANG_POP(C))
+
+# For backward compatibility.
+AC_DEFUN_ONCE(AM_PROG_CC_C_O, AC_REQUIRE(AC_PROG_CC))
 
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
-# Free Software Foundation, Inc.
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 5
+# AM_RUN_LOG(COMMAND)
+# -------------------
+# Run COMMAND, save the exit status in ac_status, and log it.
+# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
+AC_DEFUN(AM_RUN_LOG,
+{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
+   ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   (exit $ac_status); })
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
 # AM_SANITY_CHECK
 # ---------------
 AC_DEFUN(AM_SANITY_CHECK,
 AC_MSG_CHECKING(whether build environment is sane)
-# Just in case
-sleep 1
-echo timestamp > conftest.file
 # Reject unsafe characters in $srcdir or the absolute working directory
 # name.  Accept space and tab only in the latter.
 am_lf='
@@ -847,32 +902,40 @@
 esac
 case $srcdir in
   *\\\"\#\$\&\'\`$am_lf\ \	*)
-    AC_MSG_ERROR(unsafe srcdir value: `$srcdir');;
+    AC_MSG_ERROR(unsafe srcdir value: '$srcdir');;
 esac
 
-# Do `set' in a subshell so we don't clobber the current shell's
+# Do 'set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
-   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t "$srcdir/configure" conftest.file`
-   fi
-   rm -f conftest.file
-   if test "$*" != "X $srcdir/configure conftest.file" \
-      && test "$*" != "X conftest.file $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR(ls -t appears to fail.  Make sure there is not a broken
-alias in your environment)
-   fi
-
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+     if test "$*" = "X"; then
+	# -L didn't work.
+	set X `ls -t "$srcdir/configure" conftest.file`
+     fi
+     if test "$*" != "X $srcdir/configure conftest.file" \
+	&& test "$*" != "X conftest.file $srcdir/configure"; then
+
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	AC_MSG_ERROR(ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment)
+     fi
+     if test "$2" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
    test "$2" = conftest.file
    )
 then
@@ -882,46 +945,118 @@
    AC_MSG_ERROR(newly created file is older than distributed files!
 Check your system clock)
 fi
-AC_MSG_RESULT(yes))
+AC_MSG_RESULT(yes)
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+AC_CONFIG_COMMANDS_PRE(
+  AC_MSG_CHECKING(that generated files are newer than configure)
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   AC_MSG_RESULT(done))
+rm -f conftest.file
+)
 
-# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc.
+# Copyright (C) 2009-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 1
+# AM_SILENT_RULES(DEFAULT)
+# --------------------------
+# Enable less verbose build rules; with the default set to DEFAULT
+# ("yes" being less verbose, "no" or empty being verbose).
+AC_DEFUN(AM_SILENT_RULES,
+AC_ARG_ENABLE(silent-rules, dnl
+AS_HELP_STRING(
+  --enable-silent-rules,
+  less verbose build output (undo: "make V=1"))
+AS_HELP_STRING(
+  --disable-silent-rules,
+  verbose build output (undo: "make V=0"))dnl
+)
+case $enable_silent_rules in @%:@ (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=m4_if($1, yes, 0, 1);;
+esac
+dnl
+dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
+dnl do not support nested variable expansions.
+dnl See automake bug#9928 and bug#10237.
+am_make=${MAKE-make}
+AC_CACHE_CHECK(whether $am_make supports nested variables,
+   am_cv_make_support_nested_variables,
+   if AS_ECHO('TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit') | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi)
+if test $am_cv_make_support_nested_variables = yes; then
+  dnl Using '$V' instead of '$(V)' breaks IRIX make.
+  AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AC_SUBST(AM_V)dnl
+AM_SUBST_NOTMAKE(AM_V)dnl
+AC_SUBST(AM_DEFAULT_V)dnl
+AM_SUBST_NOTMAKE(AM_DEFAULT_V)dnl
+AC_SUBST(AM_DEFAULT_VERBOSITY)dnl
+AM_BACKSLASH='\'
+AC_SUBST(AM_BACKSLASH)dnl
+_AM_SUBST_NOTMAKE(AM_BACKSLASH)dnl
+)
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
 
 # AM_PROG_INSTALL_STRIP
 # ---------------------
-# One issue with vendor `install' (even GNU) is that you can't
+# One issue with vendor 'install' (even GNU) is that you can't
 # specify the program used to strip binaries.  This is especially
 # annoying in cross-compiling environments, where the build's strip
 # is unlikely to handle the host's binaries.
 # Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
+# always use install-sh in "make install-strip", and initialize
 # STRIPPROG with the value of the STRIP variable (set by the user).
 AC_DEFUN(AM_PROG_INSTALL_STRIP,
 AC_REQUIRE(AM_PROG_INSTALL_SH)dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
 # tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+# will honor the 'STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
 if test "$cross_compiling" != no; then
   AC_CHECK_TOOL(STRIP, strip, :)
 fi
 INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
 AC_SUBST(INSTALL_STRIP_PROGRAM))
 
-# Copyright (C) 2006, 2008, 2010 Free Software Foundation, Inc.
+# Copyright (C) 2006-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 3
-
 # _AM_SUBST_NOTMAKE(VARIABLE)
 # ---------------------------
 # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
@@ -935,18 +1070,16 @@
 
 # Check how to create a tarball.                            -*- Autoconf -*-
 
-# Copyright (C) 2004, 2005, 2012 Free Software Foundation, Inc.
+# Copyright (C) 2004-2013 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 2
-
 # _AM_PROG_TAR(FORMAT)
 # --------------------
 # Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
+# FORMAT should be one of 'v7', 'ustar', or 'pax'.
 #
 # Substitute a variable $(am__tar) that is a command
 # writing to stdout a FORMAT-tarball containing the directory
@@ -956,76 +1089,114 @@
 # Substitute a variable $(am__untar) that extract such
 # a tarball read from stdin.
 #     $(am__untar) < result.tar
+#
 AC_DEFUN(_AM_PROG_TAR,
 # Always define AMTAR for backward compatibility.  Yes, it's still used
 # in the wild :-(  We should find a proper way to deprecate it ...
 AC_SUBST(AMTAR, '$${TAR-tar}')
-m4_if($1, v7,
-     am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -',
-     m4_case($1, ustar,, pax,,
-              m4_fatal(Unknown tar format))
-AC_MSG_CHECKING(how to create a $1 tar archive)
-# Loop over all known methods to create a tar archive until one works.
+
+# We'll loop over all known methods to create a tar archive until one works.
 _am_tools='gnutar m4_if($1, ustar, plaintar) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
-for _am_tool in $_am_tools
-do
-  case $_am_tool in
-  gnutar)
-    for _am_tar in tar gnutar gtar;
-    do
-      AM_RUN_LOG($_am_tar --version) && break
-    done
-    am__tar="$_am_tar --format=m4_if($1, pax, posix, $1) -chf - "'"$$tardir"'
-    am__tar_="$_am_tar --format=m4_if($1, pax, posix, $1) -chf - "'"$tardir"'
-    am__untar="$_am_tar -xf -"
-    ;;
-  plaintar)
-    # Must skip GNU tar: if it does not support --format= it doesn't create
-    # ustar tarball either.
-    (tar --version) >/dev/null 2>&1 && continue
-    am__tar='tar chf - "$$tardir"'
-    am__tar_='tar chf - "$tardir"'
-    am__untar='tar xf -'
-    ;;
-  pax)
-    am__tar='pax -L -x $1 -w "$$tardir"'
-    am__tar_='pax -L -x $1 -w "$tardir"'
-    am__untar='pax -r'
-    ;;
-  cpio)
-    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
-    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
-    am__untar='cpio -i -H $1 -d'
-    ;;
-  none)
-    am__tar=false
-    am__tar_=false
-    am__untar=false
-    ;;
-  esac
 
-  # If the value was cached, stop now.  We just wanted to have am__tar
-  # and am__untar set.
-  test -n "${am_cv_prog_tar_$1}" && break
+m4_if($1, v7,
+  am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -',
+
+  m4_case($1,
+    ustar,
+     # The POSIX 1988 'ustar' format is defined with fixed-size fields.
+      # There is notably a 21 bits limit for the UID and the GID.  In fact,
+      # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+      # and bug#13588).
+      am_max_uid=2097151 # 2^21 - 1
+      am_max_gid=$am_max_uid
+      # The $UID and $GID variables are not portable, so we need to resort
+      # to the POSIX-mandated id(1) utility.  Errors in the 'id' calls
+      # below are definitely unexpected, so allow the users to see them
+      # (that is, avoid stderr redirection).
+      am_uid=`id -u || echo unknown`
+      am_gid=`id -g || echo unknown`
+      AC_MSG_CHECKING(whether UID '$am_uid' is supported by ustar format)
+      if test $am_uid -le $am_max_uid; then
+         AC_MSG_RESULT(yes)
+      else
+         AC_MSG_RESULT(no)
+         _am_tools=none
+      fi
+      AC_MSG_CHECKING(whether GID '$am_gid' is supported by ustar format)
+      if test $am_gid -le $am_max_gid; then
+         AC_MSG_RESULT(yes)
+      else
+        AC_MSG_RESULT(no)
+        _am_tools=none
+      fi,
+
+  pax,
+    ,
+
+  m4_fatal(Unknown tar format))
+
+  AC_MSG_CHECKING(how to create a $1 tar archive)
+
+  # Go ahead even if we have the value already cached.  We do so because we
+  # need to set the values for the 'am__tar' and 'am__untar' variables.
+  _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+  for _am_tool in $_am_tools; do
+    case $_am_tool in
+    gnutar)
+      for _am_tar in tar gnutar gtar; do
+        AM_RUN_LOG($_am_tar --version) && break
+      done
+      am__tar="$_am_tar --format=m4_if($1, pax, posix, $1) -chf - "'"$$tardir"'
+      am__tar_="$_am_tar --format=m4_if($1, pax, posix, $1) -chf - "'"$tardir"'
+      am__untar="$_am_tar -xf -"
+      ;;
+    plaintar)
+      # Must skip GNU tar: if it does not support --format= it doesn't create
+      # ustar tarball either.
+      (tar --version) >/dev/null 2>&1 && continue
+      am__tar='tar chf - "$$tardir"'
+      am__tar_='tar chf - "$tardir"'
+      am__untar='tar xf -'
+      ;;
+    pax)
+      am__tar='pax -L -x $1 -w "$$tardir"'
+      am__tar_='pax -L -x $1 -w "$tardir"'
+      am__untar='pax -r'
+      ;;
+    cpio)
+      am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+      am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+      am__untar='cpio -i -H $1 -d'
+      ;;
+    none)
+      am__tar=false
+      am__tar_=false
+      am__untar=false
+      ;;
+    esac
 
-  # tar/untar a dummy directory, and stop if the command works
-  rm -rf conftest.dir
-  mkdir conftest.dir
-  echo GrepMe > conftest.dir/file
-  AM_RUN_LOG(tardir=conftest.dir && eval $am__tar_ >conftest.tar)
+    # If the value was cached, stop now.  We just wanted to have am__tar
+    # and am__untar set.
+    test -n "${am_cv_prog_tar_$1}" && break
+
+    # tar/untar a dummy directory, and stop if the command works.
+    rm -rf conftest.dir
+    mkdir conftest.dir
+    echo GrepMe > conftest.dir/file
+    AM_RUN_LOG(tardir=conftest.dir && eval $am__tar_ >conftest.tar)
+    rm -rf conftest.dir
+    if test -s conftest.tar; then
+      AM_RUN_LOG($am__untar <conftest.tar)
+      AM_RUN_LOG(cat conftest.dir/file)
+      grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+    fi
+  done
   rm -rf conftest.dir
-  if test -s conftest.tar; then
-    AM_RUN_LOG($am__untar <conftest.tar)
-    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
-  fi
-done
-rm -rf conftest.dir
 
-AC_CACHE_VAL(am_cv_prog_tar_$1, am_cv_prog_tar_$1=$_am_tool)
-AC_MSG_RESULT($am_cv_prog_tar_$1))
+  AC_CACHE_VAL(am_cv_prog_tar_$1, am_cv_prog_tar_$1=$_am_tool)
+  AC_MSG_RESULT($am_cv_prog_tar_$1))
+
 AC_SUBST(am__tar)
 AC_SUBST(am__untar)
 ) # _AM_PROG_TAR

libaacs-0.7.1.tar.bz2/build-aux/compile Added

@@ -0,0 +1,347 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2012-10-14.11; # UTC
+
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" ""	$nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+  file=$1
+  case $file in
+    / | /!/*) # absolute file, and not a UNC file
+      if test -z "$file_conv"; then
+	# lazily determine how to convert abs files
+	case `uname -s` in
+	  MINGW*)
+	    file_conv=mingw
+	    ;;
+	  CYGWIN*)
+	    file_conv=cygwin
+	    ;;
+	  *)
+	    file_conv=wine
+	    ;;
+	esac
+      fi
+      case $file_conv/,$2, in
+	*,$file_conv,*)
+	  ;;
+	mingw/*)
+	  file=`cmd //C echo "$file " | sed -e 's/"$.*$ " *$/\1/'`
+	  ;;
+	cygwin/*)
+	  file=`cygpath -m "$file" || echo "$file"`
+	  ;;
+	wine/*)
+	  file=`winepath -w "$file" || echo "$file"`
+	  ;;
+      esac
+      ;;
+  esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+  func_file_conv "$1"
+  if test -z "$lib_path"; then
+    lib_path=$file
+  else
+    lib_path="$lib_path;$file"
+  fi
+  linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+  lib=$1
+  found=no
+  save_IFS=$IFS
+  IFS=';'
+  for dir in $lib_path $LIB
+  do
+    IFS=$save_IFS
+    if $shared && test -f "$dir/$lib.dll.lib"; then
+      found=yes
+      lib=$dir/$lib.dll.lib
+      break
+    fi
+    if test -f "$dir/$lib.lib"; then
+      found=yes
+      lib=$dir/$lib.lib
+      break
+    fi
+    if test -f "$dir/lib$lib.a"; then
+      found=yes
+      lib=$dir/lib$lib.a
+      break
+    fi
+  done
+  IFS=$save_IFS
+
+  if test "$found" != yes; then
+    lib=$lib.lib
+  fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+  # Assume a capable shell
+  lib_path=
+  shared=:
+  linker_opts=
+  for arg
+  do
+    if test -n "$eat"; then
+      eat=
+    else
+      case $1 in
+	-o)
+	  # configure might choose to run compile as 'compile cc -o foo foo.c'.
+	  eat=1
+	  case $2 in
+	    *.o | *.oObBjJ)
+	      func_file_conv "$2"
+	      set x "$@" -Fo"$file"
+	      shift
+	      ;;
+	    *)
+	      func_file_conv "$2"
+	      set x "$@" -Fe"$file"
+	      shift
+	      ;;
+	  esac
+	  ;;
+	-I)
+	  eat=1
+	  func_file_conv "$2" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-I*)
+	  func_file_conv "${1#-I}" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-l)
+	  eat=1
+	  func_cl_dashl "$2"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-l*)
+	  func_cl_dashl "${1#-l}"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-L)
+	  eat=1
+	  func_cl_dashL "$2"
+	  ;;
+	-L*)
+	  func_cl_dashL "${1#-L}"
+	  ;;
+	-static)
+	  shared=false
+	  ;;
+	-Wl,*)
+	  arg=${1#-Wl,}
+	  save_ifs="$IFS"; IFS=','
+	  for flag in $arg; do
+	    IFS="$save_ifs"
+	    linker_opts="$linker_opts $flag"
+	  done
+	  IFS="$save_ifs"
+	  ;;
+	-Xlinker)
+	  eat=1
+	  linker_opts="$linker_opts $2"
+	  ;;
+	-*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+	*.cc | *.CC | *.cxx | *.CXX | *.cC++)
+	  func_file_conv "$1"
+	  set x "$@" -Tp"$file"
+	  shift
+	  ;;
+	*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.oO)
+	  func_file_conv "$1" mingw
+	  set x "$@" "$file"
+	  shift
+	  ;;
+	*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+      esac
+    fi
+    shift
+  done
+  if test -n "$linker_opts"; then
+    linker_opts="-link$linker_opts"
+  fi
+  exec "$@" $linker_opts
+  exit 1
+}
+
+eat=
+
+case $1 in
+  '')
+     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: compile --help --version PROGRAM ARGS
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "compile $scriptversion"
+    exit $?
+    ;;
+  cl | */\\cl | cl.exe | */\\cl.exe )
+    func_cl_wrapper "$@"      # Doesn't return...
+    ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+  if test -n "$eat"; then
+    eat=
+  else
+    case $1 in
+      -o)
+	# configure might choose to run compile as 'compile cc -o foo foo.c'.
+	# So we strip '-o arg' only if arg is an object.
+	eat=1
+	case $2 in
+	  *.o | *.obj)
+	    ofile=$2
+	    ;;
+	  *)
+	    set x "$@" -o "$2"
+	    shift
+	    ;;
+	esac
+	;;
+      *.c)
+	cfile=$1
+	set x "$@" "$1"
+	shift
+	;;
+      *)
+	set x "$@" "$1"
+	shift
+	;;
+    esac
+  fi
+  shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+  # If no '-o' option was seen then we might have been invoked from a
+  # pattern rule where we don't need one.  That is ok -- this is a
+  # normal compilation that the losing compiler can handle.  If no
+  # '.c' file was seen then we are probably linking.  That is also
+  # ok.
+  exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*\\/||; s|^a-zA-Z:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '/\\:.-' here to ensure that we don't use the same name
+# that we are using for the .o file.  Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|/\\:.-|_|g'`.d
+while true; do
+  if mkdir "$lockdir" >/dev/null 2>&1; then
+    break
+  fi
+  sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:

libaacs-0.7.0.tar.bz2/build-aux/config.guess -> libaacs-0.7.1.tar.bz2/build-aux/config.guess Changed

@@ -1,14 +1,12 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-#   2011, 2012 Free Software Foundation, Inc.
+#   Copyright 1992-2013 Free Software Foundation, Inc.
 
-timestamp='2012-02-10'
+timestamp='2013-06-10'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
 # (at your option) any later version.
 #
 # This program is distributed in the hope that it will be useful, but
@@ -22,19 +20,17 @@
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Originally written by Per Bothner.  Please send patches (context
-# diff format) to <config-patches@gnu.org> and include a ChangeLog
-# entry.
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
 #
-# This script attempts to guess a canonical system name similar to
-# config.sub.  If it succeeds, it prints the system name on stdout, and
-# exits with 0.  Otherwise, it exits with 1.
+# Originally written by Per Bothner.
 #
 # You can get the latest version of this script from:
 # http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+#
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+
 
 me=`echo "$0" | sed -e 's,.*/,,'`
 
@@ -54,9 +50,7 @@
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
-Free Software Foundation, Inc.
+Copyright 1992-2013 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -138,6 +132,27 @@
 UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
 UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
 
+case "${UNAME_SYSTEM}" in
+Linux|GNU|GNU/*)
+	# If the system lacks a compiler, then just pick glibc.
+	# We could probably try harder.
+	LIBC=gnu
+
+	eval $set_cc_for_build
+	cat <<-EOF > $dummy.c
+	#include <features.h>
+	#if defined(__UCLIBC__)
+	LIBC=uclibc
+	#elif defined(__dietlibc__)
+	LIBC=dietlibc
+	#else
+	LIBC=gnu
+	#endif
+	EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+	;;
+esac
+
 # Note: order is significant - the case branches are not exclusive.
 
 case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
@@ -200,6 +215,10 @@
 	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
 	echo "${machine}-${os}${release}"
 	exit ;;
+    *:Bitrig:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE}
+	exit ;;
     *:OpenBSD:*:*)
 	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
 	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
@@ -302,7 +321,7 @@
     arm:RISC*:1.012*:*|arm:riscix:1.012*:*)
 	echo arm-acorn-riscix${UNAME_RELEASE}
 	exit ;;
-    arm:riscos:*:*|arm:RISCOS:*:*)
+    arm*:riscos:*:*|arm*:RISCOS:*:*)
 	echo arm-unknown-riscos
 	exit ;;
     SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
@@ -801,6 +820,9 @@
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
 	exit ;;
+    *:MINGW64*:*)
+	echo ${UNAME_MACHINE}-pc-mingw64
+	exit ;;
     *:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
 	exit ;;
@@ -852,21 +874,21 @@
 	exit ;;
     *:GNU:*:*)
 	# the GNU system
-	echo `echo ${UNAME_MACHINE}|sed -e 's,-/.*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	echo `echo ${UNAME_MACHINE}|sed -e 's,-/.*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
 	exit ;;
     *:GNU/*:*:*)
 	# other systems with GNU libc and userland
-	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^^/*/,,' | tr 'A-Z' 'a-z'``echo ${UNAME_RELEASE}|sed -e 's/-(.*//'`-gnu
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^^/*/,,' | tr 'A-Z' 'a-z'``echo ${UNAME_RELEASE}|sed -e 's/-(.*//'`-${LIBC}
 	exit ;;
     i*86:Minix:*:*)
 	echo ${UNAME_MACHINE}-pc-minix
 	exit ;;
     aarch64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     aarch64_be:Linux:*:*)
 	UNAME_MACHINE=aarch64_be
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     alpha:Linux:*:*)
 	case `sed -n '/^cpu model/s/^.*: $.*$/\1/p' < /proc/cpuinfo` in
@@ -879,59 +901,54 @@
 	  EV68*) UNAME_MACHINE=alphaev68 ;;
 	esac
 	objdump --private-headers /bin/sh | grep -q ld.so.1
-	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
-	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    arc:Linux:*:* | arceb:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     arm*:Linux:*:*)
 	eval $set_cc_for_build
 	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
 	    | grep -q __ARM_EABI__
 	then
-	    echo ${UNAME_MACHINE}-unknown-linux-gnu
+	    echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	else
 	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
 		| grep -q __ARM_PCS_VFP
 	    then
-		echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
 	    else
-		echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
+		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf
 	    fi
 	fi
 	exit ;;
     avr32*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     cris:Linux:*:*)
-	echo ${UNAME_MACHINE}-axis-linux-gnu
+	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
 	exit ;;
     crisv32:Linux:*:*)
-	echo ${UNAME_MACHINE}-axis-linux-gnu
+	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
 	exit ;;
     frv:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     hexagon:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     i*86:Linux:*:*)
-	LIBC=gnu
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#ifdef __dietlibc__
-	LIBC=dietlibc
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
-	echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+	echo ${UNAME_MACHINE}-pc-linux-${LIBC}
 	exit ;;
     ia64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     m32r*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     m68*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     mips:Linux:*:* | mips64:Linux:*:*)
 	eval $set_cc_for_build
@@ -950,54 +967,63 @@
 	#endif
 EOF
 	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
 	;;
+    or1k:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
     or32:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     padre:Linux:*:*)
-	echo sparc-unknown-linux-gnu
+	echo sparc-unknown-linux-${LIBC}
 	exit ;;
     parisc64:Linux:*:* | hppa64:Linux:*:*)
-	echo hppa64-unknown-linux-gnu
+	echo hppa64-unknown-linux-${LIBC}
 	exit ;;
     parisc:Linux:*:* | hppa:Linux:*:*)
 	# Look for CPU level
 	case `grep '^cpu^a-z*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
-	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
-	  *)    echo hppa-unknown-linux-gnu ;;
+	  PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
+	  PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
+	  *)    echo hppa-unknown-linux-${LIBC} ;;
 	esac
 	exit ;;
     ppc64:Linux:*:*)
-	echo powerpc64-unknown-linux-gnu
+	echo powerpc64-unknown-linux-${LIBC}
 	exit ;;
     ppc:Linux:*:*)
-	echo powerpc-unknown-linux-gnu
+	echo powerpc-unknown-linux-${LIBC}
+	exit ;;
+    ppc64le:Linux:*:*)
+	echo powerpc64le-unknown-linux-${LIBC}
+	exit ;;
+    ppcle:Linux:*:*)
+	echo powerpcle-unknown-linux-${LIBC}
 	exit ;;
     s390:Linux:*:* | s390x:Linux:*:*)
-	echo ${UNAME_MACHINE}-ibm-linux
+	echo ${UNAME_MACHINE}-ibm-linux-${LIBC}
 	exit ;;
     sh64*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     sh*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     sparc:Linux:*:* | sparc64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     tile*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     vax:Linux:*:*)
-	echo ${UNAME_MACHINE}-dec-linux-gnu
+	echo ${UNAME_MACHINE}-dec-linux-${LIBC}
 	exit ;;
     x86_64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     xtensa*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     i*86:DYNIX/ptx:4*:*)
 	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
@@ -1201,6 +1227,9 @@
     BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
 	echo i586-pc-haiku
 	exit ;;
+    x86_64:Haiku:*:*)
+	echo x86_64-unknown-haiku
+	exit ;;
     SX-4:SUPER-UX:*:*)
 	echo sx4-nec-superux${UNAME_RELEASE}
 	exit ;;
@@ -1227,19 +1256,21 @@
 	exit ;;
     *:Darwin:*:*)
 	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
-	case $UNAME_PROCESSOR in
-	    i386)
-		eval $set_cc_for_build
-		if  "$CC_FOR_BUILD" != 'no_compiler_found' ; then
-		  if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
-		      (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
-		      grep IS_64BIT_ARCH >/dev/null
-		  then
-		      UNAME_PROCESSOR="x86_64"
-		  fi
-		fi ;;
-	    unknown) UNAME_PROCESSOR=powerpc ;;
-	esac
+	eval $set_cc_for_build
+	if test "$UNAME_PROCESSOR" = unknown ; then
+	    UNAME_PROCESSOR=powerpc
+	fi
+	if  "$CC_FOR_BUILD" != 'no_compiler_found' ; then
+	    if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		grep IS_64BIT_ARCH >/dev/null
+	    then
+		case $UNAME_PROCESSOR in
+		    i386) UNAME_PROCESSOR=x86_64 ;;
+		    powerpc) UNAME_PROCESSOR=powerpc64 ;;
+		esac
+	    fi
+	fi
 	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
 	exit ;;
     *:procnto*:*:* | *:QNX:0123456789*:*)
@@ -1256,7 +1287,7 @@
     NEO-?:NONSTOP_KERNEL:*:*)
 	echo neo-tandem-nsk${UNAME_RELEASE}
 	exit ;;
-    NSE-?:NONSTOP_KERNEL:*:*)
+    NSE-*:NONSTOP_KERNEL:*:*)
 	echo nse-tandem-nsk${UNAME_RELEASE}
 	exit ;;
     NSR-?:NONSTOP_KERNEL:*:*)
@@ -1330,9 +1361,6 @@
 	exit ;;
 esac
 
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
 eval $set_cc_for_build
 cat >$dummy.c <<EOF
 #ifdef _SEQUENT_

libaacs-0.7.0.tar.bz2/build-aux/config.sub -> libaacs-0.7.1.tar.bz2/build-aux/config.sub Changed

libaacs-0.7.0.tar.bz2/build-aux/depcomp -> libaacs-0.7.1.tar.bz2/build-aux/depcomp Changed

@@ -1,10 +1,9 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2012-03-27.16; # UTC
+scriptversion=2013-05-30.07; # UTC
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
-# 2011, 2012 Free Software Foundation, Inc.
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -28,9 +27,9 @@
 
 case $1 in
   '')
-     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
+    echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+    exit 1;
+    ;;
   -h | --h*)
     cat <<\EOF
 Usage: depcomp --help --version PROGRAM ARGS
@@ -57,11 +56,65 @@
     ;;
 esac
 
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'.  Note that this directory component will
+# be either empty or ending with a '/' character.  This is deliberate.
+set_dir_from ()
+{
+  case $1 in
+    */*) dir=`echo "$1" | sed -e 's|/^/*$|/|'`;;
+      *) dir=;;
+  esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+  base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.^.*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+  echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+  # If the compiler actually managed to produce a dependency file,
+  # post-process it.
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form 'foo.o: dependency.h'.
+    # Do two passes, one to just change these to
+    #   $object: dependency.h
+    # and one to simply output
+    #   dependency.h:
+    # which is needed to avoid the deleted-header problem.
+    { sed -e "s,^.*\.$lower*:,$object:," < "$tmpdepfile"
+      sed -e "s,^.*\.$lower*:$tab *,," -e 's,$,:,' < "$tmpdepfile"
+    } > "$depfile"
+    rm -f "$tmpdepfile"
+  else
+    make_dummy_depfile
+  fi
+}
+
 # A tabulation character.
 tab='	'
 # A newline character.
 nl='
 '
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
 
 if test -z "$depmode" || test -z "$source" || test -z "$object"; then
   echo "depcomp: Variables source, object and depmode must be set" 1>&2
@@ -75,6 +128,9 @@
 
 rm -f "$tmpdepfile"
 
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
 # Some modes work just like other modes, but use different flags.  We
 # parameterize here, but still list the modes in the big case below,
 # to make depend.m4 easier to write.  Note that we *cannot* use a case
@@ -86,32 +142,32 @@
 fi
 
 if test "$depmode" = dashXmstdout; then
-   # This is just like dashmstdout with a different argument.
-   dashmflag=-xM
-   depmode=dashmstdout
+  # This is just like dashmstdout with a different argument.
+  dashmflag=-xM
+  depmode=dashmstdout
 fi
 
 cygpath_u="cygpath -u -f -"
 if test "$depmode" = msvcmsys; then
-   # This is just like msvisualcpp but w/o cygpath translation.
-   # Just convert the backslash-escaped backslashes to single forward
-   # slashes to satisfy depend.m4
-   cygpath_u='sed s,\\\\,/,g'
-   depmode=msvisualcpp
+  # This is just like msvisualcpp but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvisualcpp
 fi
 
 if test "$depmode" = msvc7msys; then
-   # This is just like msvc7 but w/o cygpath translation.
-   # Just convert the backslash-escaped backslashes to single forward
-   # slashes to satisfy depend.m4
-   cygpath_u='sed s,\\\\,/,g'
-   depmode=msvc7
+  # This is just like msvc7 but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvc7
 fi
 
 if test "$depmode" = xlc; then
-   # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations.
-   gccflag=-qmakedep=gcc,-MF
-   depmode=gcc
+  # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+  gccflag=-qmakedep=gcc,-MF
+  depmode=gcc
 fi
 
 case "$depmode" in
@@ -134,8 +190,7 @@
   done
   "$@"
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -143,13 +198,17 @@
   ;;
 
 gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
 ## There are various ways to get dependency output from gcc.  Here's
 ## why we pick this rather obscure method:
 ## - Don't want to use -MD because we'd like the dependencies to end
 ##   up in a subdir.  Having to rename by hand is ugly.
 ##   (We might end up doing this anyway to support other compilers.)
 ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
+##   -MM, not -M (despite what the docs say).  Also, it might not be
+##   supported by the other compilers which use the 'gcc' depmode.
 ## - Using -M directly means running the compiler twice (even worse
 ##   than renaming).
   if test -z "$gccflag"; then
@@ -157,15 +216,14 @@
   fi
   "$@" -Wp,"$gccflag$tmpdepfile"
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
+  # The second -e expression handles DOS-style file names with drive
+  # letters.
   sed -e 's/^^:*: / /' \
       -e 's/^'$alpha':\/^:*: / /' < "$tmpdepfile" >> "$depfile"
 ## This next piece of magic avoids the "deleted header file" problem.
@@ -174,15 +232,15 @@
 ## typically no way to rebuild the header).  We avoid this by adding
 ## dummy dependencies for each header file.  Too bad gcc doesn't do
 ## this for us directly.
-  tr ' ' "$nl" < "$tmpdepfile" |
 ## Some versions of gcc put a space before the ':'.  On the theory
 ## that the space means something, we add a space to the output as
 ## well.  hp depmode also adds that space, but also prefixes the VPATH
 ## to the object.  Take care to not repeat it in the output.
 ## Some versions of the HPUX 10.20 sed can't process this invocation
 ## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
-      | sed -e 's/$/ :/' >> "$depfile"
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -200,8 +258,7 @@
     "$@" -MDupdate "$tmpdepfile"
   fi
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -209,7 +266,6 @@
 
   if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
     echo "$object : \\" > "$depfile"
-
     # Clip off the initial element (the dependent).  Don't try to be
     # clever and replace this with sed code, as IRIX sed won't handle
     # lines with more than a fixed number of characters (4096 in
@@ -217,19 +273,15 @@
     # the IRIX cc adds comments like '#:fec' to the end of the
     # dependency line.
     tr ' ' "$nl" < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr "$nl" ' ' >> "$depfile"
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+      | tr "$nl" ' ' >> "$depfile"
     echo >> "$depfile"
-
     # The second pass generates a dummy entry for each header file.
     tr ' ' "$nl" < "$tmpdepfile" \
-   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> "$depfile"
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+      >> "$depfile"
   else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
+    make_dummy_depfile
   fi
   rm -f "$tmpdepfile"
   ;;
@@ -247,9 +299,8 @@
   # current directory.  Also, the AIX compiler puts '$object:' at the
   # start of each line; $object doesn't have directory information.
   # Version 6 uses the directory in both cases.
-  dir=`echo "$object" | sed -e 's|/^/*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  set_dir_from "$object"
+  set_base_from "$object"
   if test "$libtool" = yes; then
     tmpdepfile1=$dir$base.u
     tmpdepfile2=$base.u
@@ -262,9 +313,7 @@
     "$@" -M
   fi
   stat=$?
-
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
     exit $stat
   fi
@@ -273,65 +322,113 @@
   do
     test -f "$tmpdepfile" && break
   done
-  if test -f "$tmpdepfile"; then
-    # Each line is of the form 'foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # '$object: dependent.h' and one to simply 'dependent.h:'.
-    sed -e "s,^.*\.a-z*:,$object:," < "$tmpdepfile" > "$depfile"
-    sed -e 's,^.*\.a-z*:'"$tab"' *,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
+  aix_post_process_depfile
+  ;;
+
+tcc)
+  # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+  # FIXME: That version still under development at the moment of writing.
+  #        Make that this statement remains true also for stable, released
+  #        versions.
+  # It will wrap lines (doesn't matter whether long or short) with a
+  # trailing '\', as in:
+  #
+  #   foo.o : \
+  #    foo.c \
+  #    foo.h \
+  #
+  # It will put a trailing '\' even on the last line, and will use leading
+  # spaces rather than leading tabs (at least since its commit 0394caf7
+  # "Emit spaces for -MD").
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
   fi
+  rm -f "$depfile"
+  # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+  # We have to change lines of the first kind to '$object: \'.
+  sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+  # And for each line of the second kind, we have to emit a 'dep.h:'
+  # dummy dependency, to avoid the deleted-header problem.
+  sed -n -e 's|^  *$.*$ *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
-icc)
-  # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'.
-  # However on
-  #    $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-  # ICC 7.0 will fill foo.d with something like
-  #    foo.o: sub/foo.c
-  #    foo.o: sub/foo.h
-  # which is wrong.  We want
-  #    sub/foo.o: sub/foo.c
-  #    sub/foo.o: sub/foo.h
-  #    sub/foo.c:
-  #    sub/foo.h:
-  # ICC 7.1 will output
+## The order of this option in the case statement is important, since the
+## shell code in configure will try each of these formats in the order
+## listed in this file.  A plain '-MD' option would be understood by many
+## compilers, so we must ensure this comes after the gcc and icc options.
+pgcc)
+  # Portland's C compiler understands '-MD'.
+  # Will always output deps to 'file.d' where file is the root name of the
+  # source file under compilation, even if file resides in a subdirectory.
+  # The object file name does not affect the name of the '.d' file.
+  # pgcc 10.2 will output
   #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using '\':
+  # and will wrap long lines using '\' :
   #    foo.o: sub/foo.c ... \
   #     sub/foo.h ... \
   #     ...
-  # tcc 0.9.26 (FIXME still under development at the moment of writing)
-  # will emit a similar output, but also prepend the continuation lines
-  # with horizontal tabulation characters.
-  "$@" -MD -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
+  set_dir_from "$object"
+  # Use the source, not the object, to determine the base name, since
+  # that's sadly what pgcc will do too.
+  set_base_from "$source"
+  tmpdepfile=$base.d
+
+  # For projects that build the same source file twice into different object
+  # files, the pgcc approach of using the *source* file root name can cause
+  # problems in parallel builds.  Use a locking strategy to avoid stomping on
+  # the same $tmpdepfile.
+  lockdir=$base.d-lock
+  trap "
+    echo '$0: caught signal, cleaning up...' >&2
+    rmdir '$lockdir'
+    exit 1
+  " 1 2 13 15
+  numtries=100
+  i=$numtries
+  while test $i -gt 0; do
+    # mkdir is a portable test-and-set.
+    if mkdir "$lockdir" 2>/dev/null; then
+      # This process acquired the lock.
+      "$@" -MD
+      stat=$?
+      # Release the lock.
+      rmdir "$lockdir"
+      break
+    else
+      # If the lock is being held by a different process, wait
+      # until the winning process is done or we timeout.
+      while test -d "$lockdir" && test $i -gt 0; do
+        sleep 1
+        i=`expr $i - 1`
+      done
+    fi
+    i=`expr $i - 1`
+  done
+  trap - 1 2 13 15
+  if test $i -le 0; then
+    echo "$0: failed to acquire lock after $numtries attempts" >&2
+    echo "$0: check lockdir '$lockdir'" >&2
+    exit 1
+  fi
+
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
   rm -f "$depfile"
-  # Each line is of the form 'foo.o: dependent.h',
-  # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'.
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
   # Do two passes, one to just change these to
-  # '$object: dependent.h' and one to simply 'dependent.h:'.
-  sed -e "s/^ $tab $tab*/  /" -e "s,^^:*:,$object :," \
-    < "$tmpdepfile" > "$depfile"
-  sed '
-    s/ '"$tab"' '"$tab"'*/ /g
-    s/^ *//
-    s/ *\\*$//
-    s/^^:*: *//
-    /^$/d
-    /:$/d
-    s/$/ :/
-  ' < "$tmpdepfile" >> "$depfile"
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^^:*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^^:*: $.*$$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -342,9 +439,8 @@
   # 'foo.d', which lands next to the object file, wherever that
   # happens to be.
   # Much of this is similar to the tru64 case; see comments there.
-  dir=`echo "$object" | sed -e 's|/^/*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  set_dir_from  "$object"
+  set_base_from "$object"
   if test "$libtool" = yes; then
     tmpdepfile1=$dir$base.d
     tmpdepfile2=$dir.libs/$base.d
@@ -355,8 +451,7 @@
     "$@" +Maked
   fi
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
      rm -f "$tmpdepfile1" "$tmpdepfile2"
      exit $stat
   fi
@@ -366,76 +461,61 @@
     test -f "$tmpdepfile" && break
   done
   if test -f "$tmpdepfile"; then
-    sed -e "s,^.*\.a-z*:,$object:," "$tmpdepfile" > "$depfile"
+    sed -e "s,^.*\.$lower*:,$object:," "$tmpdepfile" > "$depfile"
     # Add 'dependent.h:' lines.
     sed -ne '2,${
-	       s/^ *//
-	       s/ \\*$//
-	       s/$/:/
-	       p
-	     }' "$tmpdepfile" >> "$depfile"
+               s/^ *//
+               s/ \\*$//
+               s/$/:/
+               p
+             }' "$tmpdepfile" >> "$depfile"
   else
-    echo "#dummy" > "$depfile"
+    make_dummy_depfile
   fi
   rm -f "$tmpdepfile" "$tmpdepfile2"
   ;;
 
 tru64)
-   # The Tru64 compiler uses -MD to generate dependencies as a side
-   # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-   # dependencies in 'foo.d' instead, so we check for that too.
-   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/^/*$|/|'`
-   test "x$dir" = "x$object" && dir=
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
-   if test "$libtool" = yes; then
-      # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mechanism is used in libtool 1.4 series to
-      # handle both shared and static libraries in a single compilation.
-      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
-      #
-      # With libtool 1.5 this exception was removed, and libtool now
-      # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in $dir.libs/$base.o.d and
-      # in $dir$base.o.d.  We have to check for both files, because
-      # one of the two compilations can be disabled.  We should prefer
-      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
-      # automatically cleaned when .libs/ is deleted, while ignoring
-      # the former would cause a distcleancheck panic.
-      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
-      tmpdepfile2=$dir$base.o.d          # libtool 1.5
-      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
-      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
-      "$@" -Wc,-MD
-   else
-      tmpdepfile1=$dir$base.o.d
-      tmpdepfile2=$dir$base.d
-      tmpdepfile3=$dir$base.d
-      tmpdepfile4=$dir$base.d
-      "$@" -MD
-   fi
-
-   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-      exit $stat
-   fi
-
-   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-   do
-     test -f "$tmpdepfile" && break
-   done
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.a-z*:,$object:," < "$tmpdepfile" > "$depfile"
-      sed -e 's,^.*\.a-z*:'"$tab"' *,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
-   ;;
+  # The Tru64 compiler uses -MD to generate dependencies as a side
+  # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+  # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+  # dependencies in 'foo.d' instead, so we check for that too.
+  # Subdirectories are respected.
+  set_dir_from  "$object"
+  set_base_from "$object"
+
+  if test "$libtool" = yes; then
+    # Libtool generates 2 separate objects for the 2 libraries.  These
+    # two compilations output dependencies in $dir.libs/$base.o.d and
+    # in $dir$base.o.d.  We have to check for both files, because
+    # one of the two compilations can be disabled.  We should prefer
+    # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+    # automatically cleaned when .libs/ is deleted, while ignoring
+    # the former would cause a distcleancheck panic.
+    tmpdepfile1=$dir$base.o.d          # libtool 1.5
+    tmpdepfile2=$dir.libs/$base.o.d    # Likewise.
+    tmpdepfile3=$dir.libs/$base.d      # Compaq CCC V6.2-504
+    "$@" -Wc,-MD
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    tmpdepfile3=$dir$base.d
+    "$@" -MD
+  fi
+
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  # Same post-processing that is required for AIX mode.
+  aix_post_process_depfile
+  ;;
 
 msvc7)
   if test "$libtool" = yes; then
@@ -446,8 +526,7 @@
   "$@" $showIncludes > "$tmpdepfile"
   stat=$?
   grep -v '^Note: including file: ' "$tmpdepfile"
-  if test "$stat" = 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -473,6 +552,7 @@
   G
   p
 }' >> "$depfile"
+  echo >> "$depfile" # make sure the fragment doesn't end with a backslash
   rm -f "$tmpdepfile"
   ;;
 
@@ -524,13 +604,14 @@
   # in the target name.  This is to cope with DOS-style filenames:
   # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
   "$@" $dashmflag |
-    sed 's:^'"$tab"' *^:'"$tab"' ^:^:*\:'"$tab"' *:'"$object"'\: :' > "$tmpdepfile"
+    sed "s|^$tab *^:$tab ^:^:*:$tab *|$object: |" > "$tmpdepfile"
   rm -f "$depfile"
   cat < "$tmpdepfile" > "$depfile"
-  tr ' ' "$nl" < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this sed invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -583,10 +664,12 @@
   # makedepend may prepend the VPATH from the source file name to the object.
   # No need to regex-escape $object, excess matching of '.' is harmless.
   sed "s|^.*$$object *:$|\1|" "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process the last invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed '1,2d' "$tmpdepfile" \
+    | tr ' ' "$nl" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile" "$tmpdepfile".bak
   ;;
 
@@ -622,10 +705,10 @@
     esac
   done
 
-  "$@" -E |
-    sed -n -e '/^# 0-90-9* "$^"*$".*/ s:: \1 \\:p' \
-       -e '/^#line 0-90-9* "$^"*$".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
+  "$@" -E \
+    | sed -n -e '/^# 0-90-9* "$^"*$".*/ s:: \1 \\:p' \
+             -e '/^#line 0-90-9* "$^"*$".*/ s:: \1 \\:p' \
+    | sed '$ s: \\$::' > "$tmpdepfile"
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
   cat < "$tmpdepfile" >> "$depfile"
@@ -657,15 +740,15 @@
       shift
       ;;
     "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-	set fnord "$@"
-	shift
-	shift
-	;;
+        set fnord "$@"
+        shift
+        shift
+        ;;
     *)
-	set fnord "$@" "$arg"
-	shift
-	shift
-	;;
+        set fnord "$@" "$arg"
+        shift
+        shift
+        ;;
     esac
   done
   "$@" -E 2>/dev/null |

libaacs-0.7.0.tar.bz2/build-aux/install-sh -> libaacs-0.7.1.tar.bz2/build-aux/install-sh Changed

@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2011-01-19.21; # UTC
+scriptversion=2011-11-20.07; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -35,7 +35,7 @@
 # FSF changes to this file are in the public domain.
 #
 # Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
+# 'make' implicit rules from creating a file called install from it
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
@@ -156,7 +156,7 @@
     -s) stripcmd=$stripprog;;
 
     -t) dst_arg=$2
-	# Protect names problematic for `test' and other utilities.
+	# Protect names problematic for 'test' and other utilities.
 	case $dst_arg in
 	  -* | =!) dst_arg=./$dst_arg;;
 	esac
@@ -190,7 +190,7 @@
     fi
     shift # arg
     dst_arg=$arg
-    # Protect names problematic for `test' and other utilities.
+    # Protect names problematic for 'test' and other utilities.
     case $dst_arg in
       -* | =!) dst_arg=./$dst_arg;;
     esac
@@ -202,7 +202,7 @@
     echo "$0: no input file specified." >&2
     exit 1
   fi
-  # It's OK to call `install-sh -d' without argument.
+  # It's OK to call 'install-sh -d' without argument.
   # This can happen when creating conditional directories.
   exit 0
 fi
@@ -240,7 +240,7 @@
 
 for src
 do
-  # Protect names problematic for `test' and other utilities.
+  # Protect names problematic for 'test' and other utilities.
   case $src in
     -* | =!) src=./$src;;
   esac
@@ -354,7 +354,7 @@
 	      if test -z "$dir_arg" || {
 		   # Check for POSIX incompatibilities with -m.
 		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writeable bit of parent directory when it shouldn't.
+		   # other-writable bit of parent directory when it shouldn't.
 		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
 		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
 		   case $ls_ld_tmpdir in

libaacs-0.7.0.tar.bz2/build-aux/ltmain.sh -> libaacs-0.7.1.tar.bz2/build-aux/ltmain.sh Changed

libaacs-0.7.0.tar.bz2/build-aux/missing -> libaacs-0.7.1.tar.bz2/build-aux/missing Changed

@@ -1,11 +1,10 @@
 #! /bin/sh
-# Common stub for a few missing GNU programs while installing.
+# Common wrapper for a few potentially missing GNU programs.
 
-scriptversion=2012-01-06.13; # UTC
+scriptversion=2013-10-28.13; # UTC
 
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -26,68 +25,40 @@
 # the same distribution terms that you use for the rest of that program.
 
 if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
+  echo 1>&2 "Try '$0 --help' for more information"
   exit 1
 fi
 
-run=:
-sed_output='s/.* --output =$^ *$.*/\1/p'
-sed_minuso='s/.* -o $^ *$.*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
+case $1 in
 
-msg="missing on your system"
+  --is-lightweight)
+    # Used by our autoconf macros to check whether the available missing
+    # script is modern enough.
+    exit 0
+    ;;
 
-case $1 in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  # Exit code 63 means version mismatch.  This often happens
-  # when the user try to use an ancient version of a tool on
-  # a file that requires a minimum version.  In this case we
-  # we should proceed has if the program had been absent, or
-  # if --run hadn't been passed.
-  if test $? = 63; then
-    run=:
-    msg="probably too old"
-  fi
-  ;;
+  --run)
+    # Back-compat with the calling convention used by older automake.
+    shift
+    ;;
 
   -h|--h|--he|--hel|--help)
     echo "\
 $0 OPTION... PROGRAM ARGUMENT...
 
-Handle \`PROGRAM ARGUMENT...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
+Run 'PROGRAM ARGUMENT...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
 
 Options:
   -h, --help      display this help and exit
   -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
 
 Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  autom4te     touch the output file, or create a stub one
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.ch', if possible, from existing .ch
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  yacc         create \`y.tab.ch', if possible, from existing .ch
+  aclocal   autoconf  autoheader   autom4te  automake  makeinfo
+  bison     yacc      flex         lex       help2man
 
-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
-\`g' are ignored when checking the name.
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
 
 Send bug reports to <bug-automake@gnu.org>."
     exit $?
@@ -99,228 +70,141 @@
     ;;
 
   -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
+    echo 1>&2 "$0: unknown '$1' option"
+    echo 1>&2 "Try '$0 --help' for more information"
     exit 1
     ;;
 
 esac
 
-# normalize program name to check for.
-program=`echo "$1" | sed '
-  s/^gnu-//; t
-  s/^gnu//; t
-  s/^g//; t'`
-
-# Now exit if we have it, but it failed.  Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).  This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
-  lex*|yacc*)
-    # Not GNU programs, they don't have --version.
-    ;;
-
-  *)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       # Could not run --version or --help.  This is probably someone
-       # running `$TOOL --version' or `$TOOL --help' to check whether
-       # $TOOL exists and not knowing $TOOL uses missing.
-       exit 1
-    fi
-    ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
-  aclocal*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^ *ACM_CONFIG_HEADER($^)*$).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case $f in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^^:*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  autom4te*)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
-    ;;
-
-  bison*|yacc*)
-    echo 1>&2 "\
-WARNING: \`$1' $msg.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if test $# -ne 1; then
-        eval LASTARG=\${$#}
-	case $LASTARG in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f y.tab.h; then
-	echo >y.tab.h
-    fi
-    if test ! -f y.tab.c; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex*|flex*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if test $# -ne 1; then
-        eval LASTARG=\${$#}
-	case $LASTARG in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f lex.yy.c; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit $?
-    fi
-    ;;
-
-  makeinfo*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -z "$file"; then
-      # ... or it is the one specified with @setfilename ...
-      infile=`echo "$*" | sed 's/.* $^ *$ *$/\1/'`
-      file=`sed -n '
-	/^@setfilename/{
-	  s/.* $^ *$ *$/\1/
-	  p
-	  q
-	}' $infile`
-      # ... or it is derived from the source name (dir/f.texi becomes f.info)
-      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.^.*$,,'`.info
-    fi
-    # If the file does not exist, the user really needs makeinfo;
-    # let's fail without touching anything.
-    test -f $file || exit 1
-    touch $file
-    ;;
+# Run the given program, remember its exit status.
+"$@"; st=$?
+
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
+
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch.  This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+  msg="probably too old"
+elif test $st -eq 127; then
+  # Program was missing.
+  msg="missing on your system"
+else
+  # Program was found and executed, but failed.  Give up.
+  exit $st
+fi
 
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequisites for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
+perl_URL=http://www.perl.org/
+flex_URL=http://flex.sourceforge.net/
+gnu_software_URL=http://www.gnu.org/software
+
+program_details ()
+{
+  case $1 in
+    aclocal|automake)
+      echo "The '$1' program is part of the GNU Automake package:"
+      echo "<$gnu_software_URL/automake>"
+      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/autoconf>"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+    autoconf|autom4te|autoheader)
+      echo "The '$1' program is part of the GNU Autoconf package:"
+      echo "<$gnu_software_URL/autoconf/>"
+      echo "It also requires GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+  esac
+}
+
+give_advice ()
+{
+  # Normalize program name to check for.
+  normalized_program=`echo "$1" | sed '
+    s/^gnu-//; t
+    s/^gnu//; t
+    s/^g//; t'`
+
+  printf '%s\n' "'$1' is $msg."
+
+  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+  case $normalized_program in
+    autoconf*)
+      echo "You should only need it if you modified 'configure.ac',"
+      echo "or m4 files included by it."
+      program_details 'autoconf'
+      ;;
+    autoheader*)
+      echo "You should only need it if you modified 'acconfig.h' or"
+      echo "$configure_deps."
+      program_details 'autoheader'
+      ;;
+    automake*)
+      echo "You should only need it if you modified 'Makefile.am' or"
+      echo "$configure_deps."
+      program_details 'automake'
+      ;;
+    aclocal*)
+      echo "You should only need it if you modified 'acinclude.m4' or"
+      echo "$configure_deps."
+      program_details 'aclocal'
+      ;;
+   autom4te*)
+      echo "You might have modified some maintainer files that require"
+      echo "the 'autom4te' program to be rebuilt."
+      program_details 'autom4te'
+      ;;
+    bison*|yacc*)
+      echo "You should only need it if you modified a '.y' file."
+      echo "You may want to install the GNU Bison package:"
+      echo "<$gnu_software_URL/bison/>"
+      ;;
+    lex*|flex*)
+      echo "You should only need it if you modified a '.l' file."
+      echo "You may want to install the Fast Lexical Analyzer package:"
+      echo "<$flex_URL>"
+      ;;
+    help2man*)
+      echo "You should only need it if you modified a dependency" \
+           "of a man page."
+      echo "You may want to install the GNU Help2man package:"
+      echo "<$gnu_software_URL/help2man/>"
     ;;
-esac
-
-exit 0
+    makeinfo*)
+      echo "You should only need it if you modified a '.texi' file, or"
+      echo "any other file indirectly affecting the aspect of the manual."
+      echo "You might want to install the Texinfo package:"
+      echo "<$gnu_software_URL/texinfo/>"
+      echo "The spurious makeinfo call might also be the consequence of"
+      echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+      echo "want to install GNU make:"
+      echo "<$gnu_software_URL/make/>"
+      ;;
+    *)
+      echo "You might have modified some files without having the proper"
+      echo "tools for further handling them.  Check the 'README' file, it"
+      echo "often tells you about the needed prerequisites for installing"
+      echo "this package.  You may also peek at any GNU archive site, in"
+      echo "case some other package contains this missing '$1' program."
+      ;;
+  esac
+}
+
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
+                       -e '2,$s/^/         /' >&2
+
+# Propagate the correct exit status (expected to be 127 for a program
+# not found, 63 for a program that failed due to version mismatch).
+exit $st
 
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)

libaacs-0.7.0.tar.bz2/build-aux/ylwrap -> libaacs-0.7.1.tar.bz2/build-aux/ylwrap Changed

@@ -1,10 +1,9 @@
 #! /bin/sh
 # ylwrap - wrapper for lex/yacc invocations.
 
-scriptversion=2011-08-25.18; # UTC
+scriptversion=2013-01-12.17; # UTC
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2001, 2002, 2003, 2004, 2005,
-# 2007, 2009, 2010, 2011 Free Software Foundation, Inc.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
 #
 # Written by Tom Tromey <tromey@cygnus.com>.
 #
@@ -30,9 +29,41 @@
 # bugs to <bug-automake@gnu.org> or send patches to
 # <automake-patches@gnu.org>.
 
+get_dirname ()
+{
+  case $1 in
+    */*|*\\*) printf '%s\n' "$1" | sed -e 's|$\\/$^\\/*$|\1|';;
+    # Otherwise,  we want the empty string (not ".").
+  esac
+}
+
+# guard FILE
+# ----------
+# The CPP macro used to guard inclusion of FILE.
+guard ()
+{
+  printf '%s\n' "$1"                                                    \
+    | sed                                                               \
+        -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'   \
+        -e 's/^ABCDEFGHIJKLMNOPQRSTUVWXYZ/_/g'                        \
+        -e 's/__*/_/g'
+}
+
+# quote_for_sed STRING
+# ----------------------
+# Return STRING (or stdin) quoted to be used as a sed pattern.
+quote_for_sed ()
+{
+  case $# in
+    0) cat;;
+    1) printf '%s\n' "$1";;
+  esac \
+    | sed -e 's|\\.*|\\&|g'
+}
+
 case "$1" in
   '')
-    echo "$0: No files given.  Try \`$0 --help' for more information." 1>&2
+    echo "$0: No files given.  Try '$0 --help' for more information." 1>&2
     exit 1
     ;;
   --basedir)
@@ -65,39 +96,71 @@
 
 
 # The input.
-input="$1"
+input=$1
 shift
-case "$input" in
+# We'll later need for a correct munging of "#line" directives.
+input_sub_rx=`get_dirname "$input" | quote_for_sed`
+case $input in
   \\/* | ?:\\/*)
     # Absolute path; do nothing.
     ;;
   *)
     # Relative path.  Make it absolute.
-    input="`pwd`/$input"
+    input=`pwd`/$input
     ;;
 esac
+input_rx=`get_dirname "$input" | quote_for_sed`
+
+# Since DOS filename conventions don't allow two dots,
+# the DOS version of Bison writes out y_tab.c instead of y.tab.c
+# and y_tab.h instead of y.tab.h. Test to see if this is the case.
+y_tab_nodot=false
+if test -f y_tab.c || test -f y_tab.h; then
+  y_tab_nodot=true
+fi
+
+# The parser itself, the first file, is the destination of the .y.c
+# rule in the Makefile.
+parser=$1
+
+# A sed program to s/FROM/TO/g for all the FROM/TO so that, for
+# instance, we rename #include "y.tab.h" into #include "parse.h"
+# during the conversion from y.tab.c to parse.c.
+sed_fix_filenames=
 
-pairlist=
-while test "$#" -ne 0; do
-  if test "$1" = "--"; then
+# Also rename header guards, as Bison 2.7 for instance uses its header
+# guard in its implementation file.
+sed_fix_header_guards=
+
+while test $# -ne 0; do
+  if test x"$1" = x"--"; then
     shift
     break
   fi
-  pairlist="$pairlist $1"
+  from=$1
+  # Handle y_tab.c and y_tab.h output by DOS
+  if $y_tab_nodot; then
+    case $from in
+      "y.tab.c") from=y_tab.c;;
+      "y.tab.h") from=y_tab.h;;
+    esac
+  fi
   shift
+  to=$1
+  shift
+  sed_fix_filenames="${sed_fix_filenames}s|"`quote_for_sed "$from"`"|$to|g;"
+  sed_fix_header_guards="${sed_fix_header_guards}s|"`guard "$from"`"|"`guard "$to"`"|g;"
 done
 
 # The program to run.
-prog="$1"
+prog=$1
 shift
 # Make any relative path in $prog absolute.
-case "$prog" in
+case $prog in
   \\/* | ?:\\/*) ;;
-  *\\/*) prog="`pwd`/$prog" ;;
+  *\\/*) prog=`pwd`/$prog ;;
 esac
 
-# FIXME: add hostname here for parallel makes that run commands on
-# other machines.  But that might take us over the 14-char limit.
 dirname=ylwrap$$
 do_exit="cd '`pwd`' && rm -rf $dirname > /dev/null 2>&1;"' (exit $ret); exit $ret'
 trap "ret=129; $do_exit" 1
@@ -115,98 +178,56 @@
 ret=$?
 
 if test $ret -eq 0; then
-  set X $pairlist
-  shift
-  first=yes
-  # Since DOS filename conventions don't allow two dots,
-  # the DOS version of Bison writes out y_tab.c instead of y.tab.c
-  # and y_tab.h instead of y.tab.h. Test to see if this is the case.
-  y_tab_nodot="no"
-  if test -f y_tab.c || test -f y_tab.h; then
-    y_tab_nodot="yes"
-  fi
-
-  # The directory holding the input.
-  input_dir=`echo "$input" | sed -e 's,$\\/$^\\/*$,\1,'`
-  # Quote $INPUT_DIR so we can use it in a regexp.
-  # FIXME: really we should care about more than `.' and `\'.
-  input_rx=`echo "$input_dir" | sed 's,\\\\,\\\\\\\\,g;s,\\.,\\\\.,g'`
-
-  while test "$#" -ne 0; do
-    from="$1"
-    # Handle y_tab.c and y_tab.h output by DOS
-    if test $y_tab_nodot = "yes"; then
-      if test $from = "y.tab.c"; then
-        from="y_tab.c"
-      else
-        if test $from = "y.tab.h"; then
-          from="y_tab.h"
-        fi
-      fi
-    fi
+  for from in *
+  do
+    to=`printf '%s\n' "$from" | sed "$sed_fix_filenames"`
     if test -f "$from"; then
       # If $2 is an absolute path name, then just use that,
-      # otherwise prepend `../'.
-      case "$2" in
-        \\/* | ?:\\/*) target="$2";;
-        *) target="../$2";;
+      # otherwise prepend '../'.
+      case $to in
+        \\/* | ?:\\/*) target=$to;;
+        *) target=../$to;;
       esac
 
-      # We do not want to overwrite a header file if it hasn't
-      # changed.  This avoid useless recompilations.  However the
-      # parser itself (the first file) should always be updated,
-      # because it is the destination of the .y.c rule in the
-      # Makefile.  Divert the output of all other files to a temporary
-      # file so we can compare them to existing versions.
-      if test $first = no; then
-        realtarget="$target"
-        target="tmp-`echo $target | sed s/.*\\///g`"
+      # Do not overwrite unchanged header files to avoid useless
+      # recompilations.  Always update the parser itself: it is the
+      # destination of the .y.c rule in the Makefile.  Divert the
+      # output of all other files to a temporary file so we can
+      # compare them to existing versions.
+      if test $from != $parser; then
+        realtarget=$target
+        target=tmp-`printf '%s\n' "$target" | sed 's|.*\\/||g'`
       fi
-      # Edit out `#line' or `#' directives.
-      #
-      # We don't want the resulting debug information to point at
-      # an absolute srcdir; it is better for it to just mention the
-      # .y file with no path.
-      #
-      # We want to use the real output file name, not yy.lex.c for
-      # instance.
-      #
-      # We want the include guards to be adjusted too.
-      FROM=`echo "$from" | sed \
-            -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\
-            -e 's/^ABCDEFGHIJKLMNOPQRSTUVWXYZ/_/g'`
-      TARGET=`echo "$2" | sed \
-            -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\
-            -e 's/^ABCDEFGHIJKLMNOPQRSTUVWXYZ/_/g'`
-
-      sed -e "/^#/!b" -e "s,$input_rx,," -e "s,$from,$2," \
-          -e "s,$FROM,$TARGET," "$from" >"$target" || ret=$?
-
-      # Check whether header files must be updated.
-      if test $first = no; then
+
+      # Munge "#line" or "#" directives.  Don't let the resulting
+      # debug information point at an absolute srcdir.  Use the real
+      # output file name, not yy.lex.c for instance.  Adjust the
+      # include guards too.
+      sed -e "/^#/!b"                           \
+          -e "s|$input_rx|$input_sub_rx|"       \
+          -e "$sed_fix_filenames"               \
+          -e "$sed_fix_header_guards"           \
+        "$from" >"$target" || ret=$?
+
+      # Check whether files must be updated.
+      if test "$from" != "$parser"; then
         if test -f "$realtarget" && cmp -s "$realtarget" "$target"; then
-          echo "$2" is unchanged
+          echo "$to is unchanged"
           rm -f "$target"
         else
-          echo updating "$2"
+          echo "updating $to"
           mv -f "$target" "$realtarget"
         fi
       fi
     else
-      # A missing file is only an error for the first file.  This
-      # is a blatant hack to let us support using "yacc -d".  If -d
-      # is not specified, we don't want an error when the header
-      # file is "missing".
-      if test $first = yes; then
+      # A missing file is only an error for the parser.  This is a
+      # blatant hack to let us support using "yacc -d".  If -d is not
+      # specified, don't fail when the header file is "missing".
+      if test "$from" = "$parser"; then
         ret=1
       fi
     fi
-    shift
-    shift
-    first=no
   done
-else
-  ret=$?
 fi
 
 # Remove the directory.

libaacs-0.7.0.tar.bz2/configure -> libaacs-0.7.1.tar.bz2/configure Changed

@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for libaacs 0.7.0.
+# Generated by GNU Autoconf 2.69 for libaacs 0.7.1.
 #
 # Report bugs to <http://www.videolan.org/developers/libaacs.html>.
 #
@@ -590,8 +590,8 @@
 # Identity of this package.
 PACKAGE_NAME='libaacs'
 PACKAGE_TARNAME='libaacs'
-PACKAGE_VERSION='0.7.0'
-PACKAGE_STRING='libaacs 0.7.0'
+PACKAGE_VERSION='0.7.1'
+PACKAGE_STRING='libaacs 0.7.1'
 PACKAGE_BUGREPORT='http://www.videolan.org/developers/libaacs.html'
 PACKAGE_URL=''
 
@@ -698,6 +698,10 @@
 MAINT
 MAINTAINER_MODE_FALSE
 MAINTAINER_MODE_TRUE
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+AM_DEFAULT_V
+AM_V
 am__untar
 am__tar
 AMTAR
@@ -774,6 +778,7 @@
 ac_subst_files=''
 ac_user_opts='
 enable_option_checking
+enable_silent_rules
 enable_maintainer_mode
 enable_werror
 enable_extra_warnings
@@ -1341,7 +1346,7 @@
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures libaacs 0.7.0 to adapt to many kinds of systems.
+\`configure' configures libaacs 0.7.1 to adapt to many kinds of systems.
 
 Usage: $0 OPTION... VAR=VALUE...
 
@@ -1412,7 +1417,7 @@
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of libaacs 0.7.0:";;
+     short | recursive ) echo "Configuration of libaacs 0.7.1:";;
    esac
   cat <<\_ACEOF
 
@@ -1420,15 +1425,20 @@
   --disable-option-checking  ignore unrecognized --enable/--with options
   --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
   --enable-FEATURE=ARG  include FEATURE ARG=yes
-  --enable-maintainer-mode  enable make rules and dependencies not useful
-			  (and sometimes confusing) to the casual installer
+  --enable-silent-rules   less verbose build output (undo: "make V=1")
+  --disable-silent-rules  verbose build output (undo: "make V=0")
+  --enable-maintainer-mode
+                          enable make rules and dependencies not useful (and
+                          sometimes confusing) to the casual installer
   --enable-werror         set warnings as errors via -Werror
                           default=disabled
   --disable-extra-warnings
                           set extra warnings default=enabled
   --disable-optimizations disable optimizations default=enabled
-  --disable-dependency-tracking  speeds up one-time build
-  --enable-dependency-tracking   do not reject slow dependency extractors
+  --enable-dependency-tracking
+                          do not reject slow dependency extractors
+  --disable-dependency-tracking
+                          speeds up one-time build
   --enable-shared=PKGS  build shared libraries default=yes
   --enable-static=PKGS  build static libraries default=yes
   --enable-fast-install=PKGS
@@ -1531,7 +1541,7 @@
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-libaacs configure 0.7.0
+libaacs configure 0.7.1
 generated by GNU Autoconf 2.69
 
 Copyright (C) 2012 Free Software Foundation, Inc.
@@ -2003,7 +2013,7 @@
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by libaacs $as_me 0.7.0, which was
+It was created by libaacs $as_me 0.7.1, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
 
   $ $0 $@
@@ -2492,7 +2502,7 @@
     NONENONEs,x,x, &&
   program_prefix=${target_alias}-
 
-am__api_version='1.11'
+am__api_version='1.14'
 
 # Find a good install program.  We prefer a C program (faster),
 # so one script is as good as another.  But avoid the broken or
@@ -2589,9 +2599,6 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
 $as_echo_n "checking whether build environment is sane... " >&6; }
-# Just in case
-sleep 1
-echo timestamp > conftest.file
 # Reject unsafe characters in $srcdir or the absolute working directory
 # name.  Accept space and tab only in the latter.
 am_lf='
@@ -2602,32 +2609,40 @@
 esac
 case $srcdir in
   *\\\"\#\$\&\'\`$am_lf\ \	*)
-    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+    as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
 esac
 
-# Do `set' in a subshell so we don't clobber the current shell's
+# Do 'set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
-   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
-   if test "$*" = "X"; then
-      # -L didn't work.
-      set X `ls -t "$srcdir/configure" conftest.file`
-   fi
-   rm -f conftest.file
-   if test "$*" != "X $srcdir/configure conftest.file" \
-      && test "$*" != "X conftest.file $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" "$LINENO" 5
-   fi
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+     if test "$*" = "X"; then
+	# -L didn't work.
+	set X `ls -t "$srcdir/configure" conftest.file`
+     fi
+     if test "$*" != "X $srcdir/configure conftest.file" \
+	&& test "$*" != "X conftest.file $srcdir/configure"; then
 
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment" "$LINENO" 5
+     fi
+     if test "$2" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
    test "$2" = conftest.file
    )
 then
@@ -2639,6 +2654,16 @@
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
 test "$program_prefix" != NONE &&
   program_transform_name="s&^&$program_prefix&;$program_transform_name"
 # Use a double $ so make ignores it.
@@ -2661,12 +2686,12 @@
   esac
 fi
 # Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
-  am_missing_run="$MISSING --run "
+if eval "$MISSING --is-lightweight"; then
+  am_missing_run="$MISSING "
 else
   am_missing_run=
-  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
-$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
 fi
 
 if test x"${install_sh}" != xset; then
@@ -2678,10 +2703,10 @@
   esac
 fi
 
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
 # tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
+# will honor the 'STRIP' environment variable to overrule this program.
 if test "$cross_compiling" != no; then
   if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
@@ -2820,12 +2845,6 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
 $as_echo "$MKDIR_P" >&6; }
 
-mkdir_p="$MKDIR_P"
-case $mkdir_p in
-  \\/$* | ?:\\/*) ;;
-  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-
 for ac_prog in gawk mawk nawk awk
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
@@ -2908,6 +2927,45 @@
 fi
 rmdir .tst 2>/dev/null
 
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+  enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+    AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
 if test "`cd $srcdir && pwd`" != "`pwd`"; then
   # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
   # is not polluted with repeated "-I."
@@ -2930,7 +2988,7 @@
 
 # Define the identity of the package.
  PACKAGE='libaacs'
- VERSION='0.7.0'
+ VERSION='0.7.1'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -2958,18 +3016,186 @@
 
 MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
 
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
 # Always define AMTAR for backward compatibility.  Yes, it's still used
 # in the wild :-(  We should find a proper way to deprecate it ...
 AMTAR='$${TAR-tar}'
 
-am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar plaintar pax cpio none'
+
+# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+      # There is notably a 21 bits limit for the UID and the GID.  In fact,
+      # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+      # and bug#13588).
+      am_max_uid=2097151 # 2^21 - 1
+      am_max_gid=$am_max_uid
+      # The $UID and $GID variables are not portable, so we need to resort
+      # to the POSIX-mandated id(1) utility.  Errors in the 'id' calls
+      # below are definitely unexpected, so allow the users to see them
+      # (that is, avoid stderr redirection).
+      am_uid=`id -u || echo unknown`
+      am_gid=`id -g || echo unknown`
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether UID '$am_uid' is supported by ustar format" >&5
+$as_echo_n "checking whether UID '$am_uid' is supported by ustar format... " >&6; }
+      if test $am_uid -le $am_max_uid; then
+         { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+      else
+         { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+         _am_tools=none
+      fi
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether GID '$am_gid' is supported by ustar format" >&5
+$as_echo_n "checking whether GID '$am_gid' is supported by ustar format... " >&6; }
+      if test $am_gid -le $am_max_gid; then
+         { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+      else
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+        _am_tools=none
+      fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to create a ustar tar archive" >&5
+$as_echo_n "checking how to create a ustar tar archive... " >&6; }
+
+  # Go ahead even if we have the value already cached.  We do so because we
+  # need to set the values for the 'am__tar' and 'am__untar' variables.
+  _am_tools=${am_cv_prog_tar_ustar-$_am_tools}
+
+  for _am_tool in $_am_tools; do
+    case $_am_tool in
+    gnutar)
+      for _am_tar in tar gnutar gtar; do
+        { echo "$as_me:$LINENO: $_am_tar --version" >&5
+   ($_am_tar --version) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } && break
+      done
+      am__tar="$_am_tar --format=ustar -chf - "'"$$tardir"'
+      am__tar_="$_am_tar --format=ustar -chf - "'"$tardir"'
+      am__untar="$_am_tar -xf -"
+      ;;
+    plaintar)
+      # Must skip GNU tar: if it does not support --format= it doesn't create
+      # ustar tarball either.
+      (tar --version) >/dev/null 2>&1 && continue
+      am__tar='tar chf - "$$tardir"'
+      am__tar_='tar chf - "$tardir"'
+      am__untar='tar xf -'
+      ;;
+    pax)
+      am__tar='pax -L -x ustar -w "$$tardir"'
+      am__tar_='pax -L -x ustar -w "$tardir"'
+      am__untar='pax -r'
+      ;;
+    cpio)
+      am__tar='find "$$tardir" -print | cpio -o -H ustar -L'
+      am__tar_='find "$tardir" -print | cpio -o -H ustar -L'
+      am__untar='cpio -i -H ustar -d'
+      ;;
+    none)
+      am__tar=false
+      am__tar_=false
+      am__untar=false
+      ;;
+    esac
+
+    # If the value was cached, stop now.  We just wanted to have am__tar
+    # and am__untar set.
+    test -n "${am_cv_prog_tar_ustar}" && break
+
+    # tar/untar a dummy directory, and stop if the command works.
+    rm -rf conftest.dir
+    mkdir conftest.dir
+    echo GrepMe > conftest.dir/file
+    { echo "$as_me:$LINENO: tardir=conftest.dir && eval $am__tar_ >conftest.tar" >&5
+   (tardir=conftest.dir && eval $am__tar_ >conftest.tar) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); }
+    rm -rf conftest.dir
+    if test -s conftest.tar; then
+      { echo "$as_me:$LINENO: $am__untar <conftest.tar" >&5
+   ($am__untar <conftest.tar) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); }
+      { echo "$as_me:$LINENO: cat conftest.dir/file" >&5
+   (cat conftest.dir/file) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); }
+      grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+    fi
+  done
+  rm -rf conftest.dir
+
+  if ${am_cv_prog_tar_ustar+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  am_cv_prog_tar_ustar=$_am_tool
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_tar_ustar" >&5
+$as_echo "$am_cv_prog_tar_ustar" >&6; }
+
 
 
 
 
 
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+  fi
+fi
 ac_config_headers="$ac_config_headers config.h"
 
 
@@ -3864,6 +4090,65 @@
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+   ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
 DEPDIR="${am__leading_dot}deps"
 
 ac_config_commands="$ac_config_commands depfiles"
@@ -3883,7 +4168,7 @@
 _am_result=none
 # First try GNU make style include.
 echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
+# Ignore all kinds of additional output from 'make'.
 case `$am_make -s -f confmf 2> /dev/null` in #(
 *the\ am__doit\ target*)
   am__include=include
@@ -3939,8 +4224,8 @@
   # We make a subdir and do the tests there.  Otherwise we can end up
   # making bogus files that we don't know about and never remove.  For
   # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
   rm -rf conftest.dir
   mkdir conftest.dir
   # Copy depcomp to subdir because otherwise we won't find it if we're
@@ -3975,16 +4260,16 @@
     : > sub/conftest.c
     for i in 1 2 3 4 5 6; do
       echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
     # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
     am__obj=sub/conftest.${OBJEXT-o}
     am__minus_obj="-o $am__obj"
     case $depmode in
@@ -3993,8 +4278,8 @@
       test "$am__universal" = false || continue
       ;;
     nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
       if test "x$enable_dependency_tracking" = xyes; then
 	continue
       else
@@ -4002,7 +4287,7 @@
       fi
       ;;
     msvc7 | msvc7msys | msvisualcpp | msvcmsys)
-      # This compiler won't grok `-c -o', but also, the minuso test has
+      # This compiler won't grok '-c -o', but also, the minuso test has
       # not run yet.  These depmodes are late enough in the game, and
       # so weak that their functioning should not be impacted.
       am__obj=conftest.${OBJEXT-o}
@@ -6392,7 +6677,7 @@
   rm -rf conftest*
   ;;
 
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
 s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
@@ -6417,7 +6702,10 @@
 		;;
 	    esac
 	    ;;
-	  ppc64-*linux*|powerpc64-*linux*)
+	  powerpc64le-*)
+	    LD="${LD-ld} -m elf32lppclinux"
+	    ;;
+	  powerpc64-*)
 	    LD="${LD-ld} -m elf32ppclinux"
 	    ;;
 	  s390x-*linux*)
@@ -6436,7 +6724,10 @@
 	  x86_64-*linux*)
 	    LD="${LD-ld} -m elf_x86_64"
 	    ;;
-	  ppc*-*linux*|powerpc*-*linux*)
+	  powerpcle-*)
+	    LD="${LD-ld} -m elf64lppc"
+	    ;;
+	  powerpc-*)
 	    LD="${LD-ld} -m elf64ppc"
 	    ;;
 	  s390*-*linux*|s390*-*tpf*)
@@ -12379,7 +12670,7 @@
     We can't simply define LARGE_OFF_T to be 9223372036854775807,
     since some C++ compilers masquerading as C compilers
     incorrectly reject 9223372036854775807.  */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
   int off_t_is_large(LARGE_OFF_T % 2147483629 == 721
 		       && LARGE_OFF_T % 2147483647 == 1)
 		      ? 1 : -1;
@@ -12425,7 +12716,7 @@
     We can't simply define LARGE_OFF_T to be 9223372036854775807,
     since some C++ compilers masquerading as C compilers
     incorrectly reject 9223372036854775807.  */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
   int off_t_is_large(LARGE_OFF_T % 2147483629 == 721
 		       && LARGE_OFF_T % 2147483647 == 1)
 		      ? 1 : -1;
@@ -12449,7 +12740,7 @@
     We can't simply define LARGE_OFF_T to be 9223372036854775807,
     since some C++ compilers masquerading as C compilers
     incorrectly reject 9223372036854775807.  */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
   int off_t_is_large(LARGE_OFF_T % 2147483629 == 721
 		       && LARGE_OFF_T % 2147483647 == 1)
 		      ? 1 : -1;
@@ -12494,7 +12785,7 @@
     We can't simply define LARGE_OFF_T to be 9223372036854775807,
     since some C++ compilers masquerading as C compilers
     incorrectly reject 9223372036854775807.  */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
   int off_t_is_large(LARGE_OFF_T % 2147483629 == 721
 		       && LARGE_OFF_T % 2147483647 == 1)
 		      ? 1 : -1;
@@ -12518,7 +12809,7 @@
     We can't simply define LARGE_OFF_T to be 9223372036854775807,
     since some C++ compilers masquerading as C compilers
     incorrectly reject 9223372036854775807.  */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
   int off_t_is_large(LARGE_OFF_T % 2147483629 == 721
 		       && LARGE_OFF_T % 2147483647 == 1)
 		      ? 1 : -1;
@@ -13134,10 +13425,10 @@
 
 AACS_VERSION_MINOR=7
 
-AACS_VERSION_MICRO=0
+AACS_VERSION_MICRO=1
 
 
-LT_VERSION_INFO="4:0:4"
+LT_VERSION_INFO="4:1:4"
 
 
 
@@ -13252,6 +13543,14 @@
 LTLIBOBJS=$ac_ltlibobjs
 
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
  if test -n "$EXEEXT"; then
   am__EXEEXT_TRUE=
   am__EXEEXT_FALSE='#'
@@ -13677,7 +13976,7 @@
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by libaacs $as_me 0.7.0, which was
+This file was extended by libaacs $as_me 0.7.1, which was
 generated by GNU Autoconf 2.69.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
@@ -13743,7 +14042,7 @@
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/\\""\`\$/\\\\&/g'`"
 ac_cs_version="\\
-libaacs config.status 0.7.0
+libaacs config.status 0.7.1
 configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
 
@@ -14754,7 +15053,7 @@
 
   case $ac_file$ac_mode in
     "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
-  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # Older Autoconf quotes --file arguments for eval, but not when files
   # are listed without --file.  Let's play safe and only enable the eval
   # if we detect the quoting.
   case $CONFIG_FILES in
@@ -14767,7 +15066,7 @@
     # Strip MF so we end up with the name of the file.
     mf=`echo "$mf" | sed -e 's/:.*$//'`
     # Check whether this is an Automake generated Makefile or not.
-    # We used to match only the files named `Makefile.in', but
+    # We used to match only the files named 'Makefile.in', but
     # some people rename them; so instead we look at the file content.
     # Grep'ing the first line is not enough: some people post-process
     # each Makefile.in and add a new line on top of each file to say so.
@@ -14801,21 +15100,19 @@
       continue
     fi
     # Extract the definition of DEPDIR, am__include, and am__quote
-    # from the Makefile without running `make'.
+    # from the Makefile without running 'make'.
     DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
     test -z "$DEPDIR" && continue
     am__include=`sed -n 's/^am__include = //p' < "$mf"`
-    test -z "am__include" && continue
+    test -z "$am__include" && continue
     am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-    # When using ansi2knr, U may be empty or an underscore; expand it
-    U=`sed -n 's/^U = //p' < "$mf"`
     # Find all dependency output files, they are included files with
     # $(DEPDIR) in their names.  We invoke sed twice because it is the
     # simplest approach to changing $(DEPDIR) to its actual value in the
     # expansion.
     for file in `sed -n "
       s/^$am__include $am__quote$.*(DEPDIR).*$$am__quote"'$/\1/p' <"$mf" | \
-	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
       # Make sure the directory exists.
       test -f "$dirpart/$file" && continue
       fdir=`$as_dirname -- "$file" ||

libaacs-0.7.0.tar.bz2/configure.ac -> libaacs-0.7.1.tar.bz2/configure.ac Changed

libaacs-0.7.0.tar.bz2/m4/libtool.m4 -> libaacs-0.7.1.tar.bz2/m4/libtool.m4 Changed

libaacs-0.7.0.tar.bz2/src/Makefile.am -> libaacs-0.7.1.tar.bz2/src/Makefile.am Changed

libaacs-0.7.0.tar.bz2/src/Makefile.in -> libaacs-0.7.1.tar.bz2/src/Makefile.in Changed

@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -19,23 +18,51 @@
 
 
 VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\\ \	*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs$$bs $$bs	*//g"`;; \
     esac; \
-    test $$am__dry = yes; \
-  }
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -dEDm) skip_next=yes;; \
+      -JT) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -68,9 +95,11 @@
 noinst_PROGRAMS = parser_test$(EXEEXT)
 bin_PROGRAMS = aacs_info$(EXEEXT)
 subdir = src
-DIST_COMMON = $(pkginclude_HEADERS) $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(srcdir)/libaacs.pc.in keydbcfg-lexer.c \
-	keydbcfg-parser.c keydbcfg-parser.h
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(srcdir)/libaacs.pc.in file/keydbcfg-parser.h \
+	file/keydbcfg-parser.c file/keydbcfg-lexer.c \
+	$(top_srcdir)/build-aux/depcomp $(top_srcdir)/build-aux/ylwrap \
+	$(pkginclude_HEADERS)
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/attributes.m4 \
 	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
@@ -123,55 +152,95 @@
 	util/macro.h util/logging.c util/logging.h util/strutl.c \
 	util/strutl.h file/dirs_darwin.c file/dirs_win32.c \
 	file/dirs_xdg.c file/path.c
-@HAVE_DARWIN_TRUE@am__objects_1 = dirs_darwin.lo
-@HAVE_DARWIN_FALSE@@HAVE_WIN32_TRUE@am__objects_2 = dirs_win32.lo
-@HAVE_DARWIN_FALSE@@HAVE_WIN32_FALSE@am__objects_3 = dirs_xdg.lo \
-@HAVE_DARWIN_FALSE@@HAVE_WIN32_FALSE@	path.lo
-am_libaacs_la_OBJECTS = aacs.lo mmc.lo crypto.lo mkb.lo file_posix.lo \
-	keydbcfg.lo keydbcfg-parser.lo keydbcfg-lexer.lo logging.lo \
-	strutl.lo $(am__objects_1) $(am__objects_2) $(am__objects_3)
+am__dirstamp = $(am__leading_dot)dirstamp
+@HAVE_DARWIN_TRUE@am__objects_1 = file/dirs_darwin.lo
+@HAVE_DARWIN_FALSE@@HAVE_WIN32_TRUE@am__objects_2 =  \
+@HAVE_DARWIN_FALSE@@HAVE_WIN32_TRUE@	file/dirs_win32.lo
+@HAVE_DARWIN_FALSE@@HAVE_WIN32_FALSE@am__objects_3 = file/dirs_xdg.lo \
+@HAVE_DARWIN_FALSE@@HAVE_WIN32_FALSE@	file/path.lo
+am_libaacs_la_OBJECTS = libaacs/aacs.lo libaacs/mmc.lo \
+	libaacs/crypto.lo libaacs/mkb.lo file/file_posix.lo \
+	file/keydbcfg.lo file/keydbcfg-parser.lo \
+	file/keydbcfg-lexer.lo util/logging.lo util/strutl.lo \
+	$(am__objects_1) $(am__objects_2) $(am__objects_3)
 libaacs_la_OBJECTS = $(am_libaacs_la_OBJECTS)
-libaacs_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+libaacs_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
 	$(libaacs_la_LDFLAGS) $(LDFLAGS) -o $@
 PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS)
-am_aacs_info_OBJECTS = aacs_info-aacs_info.$(OBJEXT)
+am_aacs_info_OBJECTS = examples/aacs_info-aacs_info.$(OBJEXT)
 aacs_info_OBJECTS = $(am_aacs_info_OBJECTS)
 aacs_info_DEPENDENCIES = libaacs.la
-aacs_info_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+aacs_info_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(aacs_info_CFLAGS) \
 	$(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-am_parser_test_OBJECTS = parser_test-parser_test.$(OBJEXT) \
-	parser_test-keydbcfg-parser.$(OBJEXT) \
-	parser_test-keydbcfg-lexer.$(OBJEXT) \
-	parser_test-strutl.$(OBJEXT) parser_test-logging.$(OBJEXT)
+am_parser_test_OBJECTS = examples/parser_test-parser_test.$(OBJEXT) \
+	file/parser_test-keydbcfg-parser.$(OBJEXT) \
+	file/parser_test-keydbcfg-lexer.$(OBJEXT) \
+	util/parser_test-strutl.$(OBJEXT) \
+	util/parser_test-logging.$(OBJEXT)
 parser_test_OBJECTS = $(am_parser_test_OBJECTS)
 parser_test_LDADD = $(LDADD)
-parser_test_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+parser_test_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(parser_test_CFLAGS) \
 	$(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
 depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
 am__depfiles_maybe = depfiles
 am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
-	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
 CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
-	$(LDFLAGS) -o $@
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
 @MAINTAINER_MODE_FALSE@am__skiplex = test -f $@ ||
 LEXCOMPILE = $(LEX) $(AM_LFLAGS) $(LFLAGS)
-LTLEXCOMPILE = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	--mode=compile $(LEX) $(AM_LFLAGS) $(LFLAGS)
+LTLEXCOMPILE = $(LIBTOOL) $(AM_V_lt) $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(LEX) $(AM_LFLAGS) $(LFLAGS)
+AM_V_LEX = $(am__v_LEX_@AM_V@)
+am__v_LEX_ = $(am__v_LEX_@AM_DEFAULT_V@)
+am__v_LEX_0 = @echo "  LEX     " $@;
+am__v_LEX_1 = 
 YLWRAP = $(top_srcdir)/build-aux/ylwrap
 @MAINTAINER_MODE_FALSE@am__skipyacc = test -f $@ ||
+am__yacc_c2h = sed -e s/cc$$/hh/ -e s/cpp$$/hpp/ -e s/cxx$$/hxx/ \
+		   -e s/c++$$/h++/ -e s/c$$/h/
 YACCCOMPILE = $(YACC) $(AM_YFLAGS) $(YFLAGS)
-LTYACCCOMPILE = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	--mode=compile $(YACC) $(AM_YFLAGS) $(YFLAGS)
+LTYACCCOMPILE = $(LIBTOOL) $(AM_V_lt) $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(YACC) $(AM_YFLAGS) $(YFLAGS)
+AM_V_YACC = $(am__v_YACC_@AM_V@)
+am__v_YACC_ = $(am__v_YACC_@AM_DEFAULT_V@)
+am__v_YACC_0 = @echo "  YACC    " $@;
+am__v_YACC_1 = 
 SOURCES = $(libaacs_la_SOURCES) $(EXTRA_libaacs_la_SOURCES) \
 	$(aacs_info_SOURCES) $(parser_test_SOURCES)
 DIST_SOURCES = $(am__libaacs_la_SOURCES_DIST) \
@@ -184,6 +253,23 @@
   esac
 DATA = $(pkgconfig_DATA)
 HEADERS = $(pkginclude_HEADERS)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items$$0 = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
@@ -192,6 +278,7 @@
 AACS_VERSION_MINOR = @AACS_VERSION_MINOR@
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AR = @AR@
 AS = @AS@
 AUTOCONF = @AUTOCONF@
@@ -346,7 +433,7 @@
 libaacs_la_LIBADD = $(LIBGCRYPT_LIBS) $(GPG_ERROR_LIBS)
 pkgconfigdir = $(libdir)/pkgconfig
 pkgconfig_DATA = libaacs.pc
-BUILT_SOURCES = keydbcfg-parser.h keydbcfg-parser.c keydbcfg-lexer.c
+BUILT_SOURCES = file/keydbcfg-parser.h file/keydbcfg-parser.c file/keydbcfg-lexer.c
 CLEANFILES = $(BUILT_SOURCES)
 parser_test_SOURCES = examples/parser_test.c \
 	file/keydbcfg-parser.y \
@@ -395,6 +482,7 @@
 $(am__aclocal_m4_deps):
 libaacs.pc: $(top_builddir)/config.status $(srcdir)/libaacs.pc.in
 	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+
 install-libLTLIBRARIES: $(lib_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
 	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
@@ -421,17 +509,63 @@
 
 clean-libLTLIBRARIES:
 	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
-	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-	  dir="`echo $$p | sed -e 's|/^/*$$||'`"; \
-	  test "$$dir" != "$$p" || dir=.; \
-	  echo "rm -f \"$${dir}/so_locations\""; \
-	  rm -f "$${dir}/so_locations"; \
-	done
-keydbcfg-parser.h: keydbcfg-parser.c
-	@if test ! -f $@; then rm -f keydbcfg-parser.c; else :; fi
-	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) keydbcfg-parser.c; else :; fi
+	@list='$(lib_LTLIBRARIES)'; \
+	locs=`for p in $$list; do echo $$p; done | \
+	      sed 's|^^/*$$|.|; s|/^/*$$||; s|$$|/so_locations|' | \
+	      sort -u`; \
+	test -z "$$locs" || { \
+	  echo rm -f $${locs}; \
+	  rm -f $${locs}; \
+	}
+libaacs/$(am__dirstamp):
+	@$(MKDIR_P) libaacs
+	@: > libaacs/$(am__dirstamp)
+libaacs/$(DEPDIR)/$(am__dirstamp):
+	@$(MKDIR_P) libaacs/$(DEPDIR)
+	@: > libaacs/$(DEPDIR)/$(am__dirstamp)
+libaacs/aacs.lo: libaacs/$(am__dirstamp) \
+	libaacs/$(DEPDIR)/$(am__dirstamp)
+libaacs/mmc.lo: libaacs/$(am__dirstamp) \
+	libaacs/$(DEPDIR)/$(am__dirstamp)
+libaacs/crypto.lo: libaacs/$(am__dirstamp) \
+	libaacs/$(DEPDIR)/$(am__dirstamp)
+libaacs/mkb.lo: libaacs/$(am__dirstamp) \
+	libaacs/$(DEPDIR)/$(am__dirstamp)
+file/$(am__dirstamp):
+	@$(MKDIR_P) file
+	@: > file/$(am__dirstamp)
+file/$(DEPDIR)/$(am__dirstamp):
+	@$(MKDIR_P) file/$(DEPDIR)
+	@: > file/$(DEPDIR)/$(am__dirstamp)
+file/file_posix.lo: file/$(am__dirstamp) \
+	file/$(DEPDIR)/$(am__dirstamp)
+file/keydbcfg.lo: file/$(am__dirstamp) file/$(DEPDIR)/$(am__dirstamp)
+file/keydbcfg-parser.h: file/keydbcfg-parser.c
+	@if test ! -f $@; then rm -f file/keydbcfg-parser.c; else :; fi
+	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) file/keydbcfg-parser.c; else :; fi
+file/keydbcfg-parser.lo: file/$(am__dirstamp) \
+	file/$(DEPDIR)/$(am__dirstamp)
+file/keydbcfg-lexer.lo: file/$(am__dirstamp) \
+	file/$(DEPDIR)/$(am__dirstamp)
+util/$(am__dirstamp):
+	@$(MKDIR_P) util
+	@: > util/$(am__dirstamp)
+util/$(DEPDIR)/$(am__dirstamp):
+	@$(MKDIR_P) util/$(DEPDIR)
+	@: > util/$(DEPDIR)/$(am__dirstamp)
+util/logging.lo: util/$(am__dirstamp) util/$(DEPDIR)/$(am__dirstamp)
+util/strutl.lo: util/$(am__dirstamp) util/$(DEPDIR)/$(am__dirstamp)
+file/dirs_darwin.lo: file/$(am__dirstamp) \
+	file/$(DEPDIR)/$(am__dirstamp)
+file/dirs_win32.lo: file/$(am__dirstamp) \
+	file/$(DEPDIR)/$(am__dirstamp)
+file/dirs_xdg.lo: file/$(am__dirstamp) file/$(DEPDIR)/$(am__dirstamp)
+file/path.lo: file/$(am__dirstamp) file/$(DEPDIR)/$(am__dirstamp)
+libaacs/ec.lo: libaacs/$(am__dirstamp) \
+	libaacs/$(DEPDIR)/$(am__dirstamp)
+
 libaacs.la: $(libaacs_la_OBJECTS) $(libaacs_la_DEPENDENCIES) $(EXTRA_libaacs_la_DEPENDENCIES) 
-	$(libaacs_la_LINK) -rpath $(libdir) $(libaacs_la_OBJECTS) $(libaacs_la_LIBADD) $(LIBS)
+	$(AM_V_CCLD)$(libaacs_la_LINK) -rpath $(libdir) $(libaacs_la_OBJECTS) $(libaacs_la_LIBADD) $(LIBS)
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
 	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
@@ -441,10 +575,12 @@
 	fi; \
 	for p in $$list; do echo "$$p $$p"; done | \
 	sed 's/$(EXEEXT)$$//' | \
-	while read p p1; do if test -f $$p || test -f $$p1; \
-	  then echo "$$p"; echo "$$p"; else :; fi; \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
 	done | \
-	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
 	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
 	sed 'N;N;N;s,\n, ,g' | \
 	$(AWK) 'BEGIN { files"." = ""; dirs"." = 1 } \
@@ -465,7 +601,8 @@
 	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
 	files=`for p in $$list; do echo "$$p"; done | \
 	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-	      -e 's/$$/$(EXEEXT)/' `; \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
 	test -n "$$list" || exit 0; \
 	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
 	cd "$(DESTDIR)$(bindir)" && rm -f $$files
@@ -487,258 +624,190 @@
 	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
 	echo " rm -f" $$list; \
 	rm -f $$list
+examples/$(am__dirstamp):
+	@$(MKDIR_P) examples
+	@: > examples/$(am__dirstamp)
+examples/$(DEPDIR)/$(am__dirstamp):
+	@$(MKDIR_P) examples/$(DEPDIR)
+	@: > examples/$(DEPDIR)/$(am__dirstamp)
+examples/aacs_info-aacs_info.$(OBJEXT): examples/$(am__dirstamp) \
+	examples/$(DEPDIR)/$(am__dirstamp)
+
 aacs_info$(EXEEXT): $(aacs_info_OBJECTS) $(aacs_info_DEPENDENCIES) $(EXTRA_aacs_info_DEPENDENCIES) 
 	@rm -f aacs_info$(EXEEXT)
-	$(aacs_info_LINK) $(aacs_info_OBJECTS) $(aacs_info_LDADD) $(LIBS)
+	$(AM_V_CCLD)$(aacs_info_LINK) $(aacs_info_OBJECTS) $(aacs_info_LDADD) $(LIBS)
+examples/parser_test-parser_test.$(OBJEXT): examples/$(am__dirstamp) \
+	examples/$(DEPDIR)/$(am__dirstamp)
+file/parser_test-keydbcfg-parser.$(OBJEXT): file/$(am__dirstamp) \
+	file/$(DEPDIR)/$(am__dirstamp)
+file/parser_test-keydbcfg-lexer.$(OBJEXT): file/$(am__dirstamp) \
+	file/$(DEPDIR)/$(am__dirstamp)
+util/parser_test-strutl.$(OBJEXT): util/$(am__dirstamp) \
+	util/$(DEPDIR)/$(am__dirstamp)
+util/parser_test-logging.$(OBJEXT): util/$(am__dirstamp) \
+	util/$(DEPDIR)/$(am__dirstamp)
+
 parser_test$(EXEEXT): $(parser_test_OBJECTS) $(parser_test_DEPENDENCIES) $(EXTRA_parser_test_DEPENDENCIES) 
 	@rm -f parser_test$(EXEEXT)
-	$(parser_test_LINK) $(parser_test_OBJECTS) $(parser_test_LDADD) $(LIBS)
+	$(AM_V_CCLD)$(parser_test_LINK) $(parser_test_OBJECTS) $(parser_test_LDADD) $(LIBS)
 
 mostlyclean-compile:
 	-rm -f *.$(OBJEXT)
+	-rm -f examples/*.$(OBJEXT)
+	-rm -f file/*.$(OBJEXT)
+	-rm -f file/*.lo
+	-rm -f libaacs/*.$(OBJEXT)
+	-rm -f libaacs/*.lo
+	-rm -f util/*.$(OBJEXT)
+	-rm -f util/*.lo
 
 distclean-compile:
 	-rm -f *.tab.c
 
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aacs.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aacs_info-aacs_info.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/crypto.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dirs_darwin.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dirs_win32.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dirs_xdg.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ec.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/file_posix.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/keydbcfg-lexer.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/keydbcfg-parser.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/keydbcfg.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/logging.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mkb.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mmc.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parser_test-keydbcfg-lexer.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parser_test-keydbcfg-parser.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parser_test-logging.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parser_test-parser_test.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parser_test-strutl.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/path.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strutl.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@examples/$(DEPDIR)/aacs_info-aacs_info.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@examples/$(DEPDIR)/parser_test-parser_test.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@file/$(DEPDIR)/dirs_darwin.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@file/$(DEPDIR)/dirs_win32.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@file/$(DEPDIR)/dirs_xdg.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@file/$(DEPDIR)/file_posix.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@file/$(DEPDIR)/keydbcfg-lexer.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@file/$(DEPDIR)/keydbcfg-parser.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@file/$(DEPDIR)/keydbcfg.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@file/$(DEPDIR)/parser_test-keydbcfg-lexer.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@file/$(DEPDIR)/parser_test-keydbcfg-parser.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@file/$(DEPDIR)/path.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@libaacs/$(DEPDIR)/aacs.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@libaacs/$(DEPDIR)/crypto.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@libaacs/$(DEPDIR)/ec.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@libaacs/$(DEPDIR)/mkb.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@libaacs/$(DEPDIR)/mmc.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@util/$(DEPDIR)/logging.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@util/$(DEPDIR)/parser_test-logging.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@util/$(DEPDIR)/parser_test-strutl.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@util/$(DEPDIR)/strutl.Plo@am__quote@
 
 .c.o:
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|^/*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
+@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c $<
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
 
 .c.obj:
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|^/*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
+@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .c.lo:
-@am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
-
-aacs.lo: libaacs/aacs.c
-@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT aacs.lo -MD -MP -MF $(DEPDIR)/aacs.Tpo -c -o aacs.lo `test -f 'libaacs/aacs.c' || echo '$(srcdir)/'`libaacs/aacs.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/aacs.Tpo $(DEPDIR)/aacs.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='libaacs/aacs.c' object='aacs.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o aacs.lo `test -f 'libaacs/aacs.c' || echo '$(srcdir)/'`libaacs/aacs.c
-
-mmc.lo: libaacs/mmc.c
-@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT mmc.lo -MD -MP -MF $(DEPDIR)/mmc.Tpo -c -o mmc.lo `test -f 'libaacs/mmc.c' || echo '$(srcdir)/'`libaacs/mmc.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/mmc.Tpo $(DEPDIR)/mmc.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='libaacs/mmc.c' object='mmc.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o mmc.lo `test -f 'libaacs/mmc.c' || echo '$(srcdir)/'`libaacs/mmc.c
-
-crypto.lo: libaacs/crypto.c
-@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT crypto.lo -MD -MP -MF $(DEPDIR)/crypto.Tpo -c -o crypto.lo `test -f 'libaacs/crypto.c' || echo '$(srcdir)/'`libaacs/crypto.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/crypto.Tpo $(DEPDIR)/crypto.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='libaacs/crypto.c' object='crypto.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o crypto.lo `test -f 'libaacs/crypto.c' || echo '$(srcdir)/'`libaacs/crypto.c
-
-mkb.lo: libaacs/mkb.c
-@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT mkb.lo -MD -MP -MF $(DEPDIR)/mkb.Tpo -c -o mkb.lo `test -f 'libaacs/mkb.c' || echo '$(srcdir)/'`libaacs/mkb.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/mkb.Tpo $(DEPDIR)/mkb.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='libaacs/mkb.c' object='mkb.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o mkb.lo `test -f 'libaacs/mkb.c' || echo '$(srcdir)/'`libaacs/mkb.c
-
-file_posix.lo: file/file_posix.c
-@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT file_posix.lo -MD -MP -MF $(DEPDIR)/file_posix.Tpo -c -o file_posix.lo `test -f 'file/file_posix.c' || echo '$(srcdir)/'`file/file_posix.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/file_posix.Tpo $(DEPDIR)/file_posix.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='file/file_posix.c' object='file_posix.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o file_posix.lo `test -f 'file/file_posix.c' || echo '$(srcdir)/'`file/file_posix.c
-
-keydbcfg.lo: file/keydbcfg.c
-@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT keydbcfg.lo -MD -MP -MF $(DEPDIR)/keydbcfg.Tpo -c -o keydbcfg.lo `test -f 'file/keydbcfg.c' || echo '$(srcdir)/'`file/keydbcfg.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/keydbcfg.Tpo $(DEPDIR)/keydbcfg.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='file/keydbcfg.c' object='keydbcfg.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o keydbcfg.lo `test -f 'file/keydbcfg.c' || echo '$(srcdir)/'`file/keydbcfg.c
-
-logging.lo: util/logging.c
-@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT logging.lo -MD -MP -MF $(DEPDIR)/logging.Tpo -c -o logging.lo `test -f 'util/logging.c' || echo '$(srcdir)/'`util/logging.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/logging.Tpo $(DEPDIR)/logging.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='util/logging.c' object='logging.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o logging.lo `test -f 'util/logging.c' || echo '$(srcdir)/'`util/logging.c
-
-strutl.lo: util/strutl.c
-@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT strutl.lo -MD -MP -MF $(DEPDIR)/strutl.Tpo -c -o strutl.lo `test -f 'util/strutl.c' || echo '$(srcdir)/'`util/strutl.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/strutl.Tpo $(DEPDIR)/strutl.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='util/strutl.c' object='strutl.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o strutl.lo `test -f 'util/strutl.c' || echo '$(srcdir)/'`util/strutl.c
-
-dirs_darwin.lo: file/dirs_darwin.c
-@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT dirs_darwin.lo -MD -MP -MF $(DEPDIR)/dirs_darwin.Tpo -c -o dirs_darwin.lo `test -f 'file/dirs_darwin.c' || echo '$(srcdir)/'`file/dirs_darwin.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/dirs_darwin.Tpo $(DEPDIR)/dirs_darwin.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='file/dirs_darwin.c' object='dirs_darwin.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o dirs_darwin.lo `test -f 'file/dirs_darwin.c' || echo '$(srcdir)/'`file/dirs_darwin.c
-
-dirs_win32.lo: file/dirs_win32.c
-@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT dirs_win32.lo -MD -MP -MF $(DEPDIR)/dirs_win32.Tpo -c -o dirs_win32.lo `test -f 'file/dirs_win32.c' || echo '$(srcdir)/'`file/dirs_win32.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/dirs_win32.Tpo $(DEPDIR)/dirs_win32.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='file/dirs_win32.c' object='dirs_win32.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o dirs_win32.lo `test -f 'file/dirs_win32.c' || echo '$(srcdir)/'`file/dirs_win32.c
-
-dirs_xdg.lo: file/dirs_xdg.c
-@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT dirs_xdg.lo -MD -MP -MF $(DEPDIR)/dirs_xdg.Tpo -c -o dirs_xdg.lo `test -f 'file/dirs_xdg.c' || echo '$(srcdir)/'`file/dirs_xdg.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/dirs_xdg.Tpo $(DEPDIR)/dirs_xdg.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='file/dirs_xdg.c' object='dirs_xdg.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o dirs_xdg.lo `test -f 'file/dirs_xdg.c' || echo '$(srcdir)/'`file/dirs_xdg.c
-
-path.lo: file/path.c
-@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT path.lo -MD -MP -MF $(DEPDIR)/path.Tpo -c -o path.lo `test -f 'file/path.c' || echo '$(srcdir)/'`file/path.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/path.Tpo $(DEPDIR)/path.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='file/path.c' object='path.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o path.lo `test -f 'file/path.c' || echo '$(srcdir)/'`file/path.c
-
-ec.lo: libaacs/ec.c
-@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT ec.lo -MD -MP -MF $(DEPDIR)/ec.Tpo -c -o ec.lo `test -f 'libaacs/ec.c' || echo '$(srcdir)/'`libaacs/ec.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/ec.Tpo $(DEPDIR)/ec.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='libaacs/ec.c' object='ec.lo' libtool=yes @AMDEPBACKSLASH@
+@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|^/*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
+@am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
+@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o ec.lo `test -f 'libaacs/ec.c' || echo '$(srcdir)/'`libaacs/ec.c
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
 
-aacs_info-aacs_info.o: examples/aacs_info.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(aacs_info_CFLAGS) $(CFLAGS) -MT aacs_info-aacs_info.o -MD -MP -MF $(DEPDIR)/aacs_info-aacs_info.Tpo -c -o aacs_info-aacs_info.o `test -f 'examples/aacs_info.c' || echo '$(srcdir)/'`examples/aacs_info.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/aacs_info-aacs_info.Tpo $(DEPDIR)/aacs_info-aacs_info.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='examples/aacs_info.c' object='aacs_info-aacs_info.o' libtool=no @AMDEPBACKSLASH@
+examples/aacs_info-aacs_info.o: examples/aacs_info.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(aacs_info_CFLAGS) $(CFLAGS) -MT examples/aacs_info-aacs_info.o -MD -MP -MF examples/$(DEPDIR)/aacs_info-aacs_info.Tpo -c -o examples/aacs_info-aacs_info.o `test -f 'examples/aacs_info.c' || echo '$(srcdir)/'`examples/aacs_info.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) examples/$(DEPDIR)/aacs_info-aacs_info.Tpo examples/$(DEPDIR)/aacs_info-aacs_info.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='examples/aacs_info.c' object='examples/aacs_info-aacs_info.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(aacs_info_CFLAGS) $(CFLAGS) -c -o aacs_info-aacs_info.o `test -f 'examples/aacs_info.c' || echo '$(srcdir)/'`examples/aacs_info.c
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(aacs_info_CFLAGS) $(CFLAGS) -c -o examples/aacs_info-aacs_info.o `test -f 'examples/aacs_info.c' || echo '$(srcdir)/'`examples/aacs_info.c
 
-aacs_info-aacs_info.obj: examples/aacs_info.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(aacs_info_CFLAGS) $(CFLAGS) -MT aacs_info-aacs_info.obj -MD -MP -MF $(DEPDIR)/aacs_info-aacs_info.Tpo -c -o aacs_info-aacs_info.obj `if test -f 'examples/aacs_info.c'; then $(CYGPATH_W) 'examples/aacs_info.c'; else $(CYGPATH_W) '$(srcdir)/examples/aacs_info.c'; fi`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/aacs_info-aacs_info.Tpo $(DEPDIR)/aacs_info-aacs_info.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='examples/aacs_info.c' object='aacs_info-aacs_info.obj' libtool=no @AMDEPBACKSLASH@
+examples/aacs_info-aacs_info.obj: examples/aacs_info.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(aacs_info_CFLAGS) $(CFLAGS) -MT examples/aacs_info-aacs_info.obj -MD -MP -MF examples/$(DEPDIR)/aacs_info-aacs_info.Tpo -c -o examples/aacs_info-aacs_info.obj `if test -f 'examples/aacs_info.c'; then $(CYGPATH_W) 'examples/aacs_info.c'; else $(CYGPATH_W) '$(srcdir)/examples/aacs_info.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) examples/$(DEPDIR)/aacs_info-aacs_info.Tpo examples/$(DEPDIR)/aacs_info-aacs_info.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='examples/aacs_info.c' object='examples/aacs_info-aacs_info.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(aacs_info_CFLAGS) $(CFLAGS) -c -o aacs_info-aacs_info.obj `if test -f 'examples/aacs_info.c'; then $(CYGPATH_W) 'examples/aacs_info.c'; else $(CYGPATH_W) '$(srcdir)/examples/aacs_info.c'; fi`
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(aacs_info_CFLAGS) $(CFLAGS) -c -o examples/aacs_info-aacs_info.obj `if test -f 'examples/aacs_info.c'; then $(CYGPATH_W) 'examples/aacs_info.c'; else $(CYGPATH_W) '$(srcdir)/examples/aacs_info.c'; fi`
 
-parser_test-parser_test.o: examples/parser_test.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -MT parser_test-parser_test.o -MD -MP -MF $(DEPDIR)/parser_test-parser_test.Tpo -c -o parser_test-parser_test.o `test -f 'examples/parser_test.c' || echo '$(srcdir)/'`examples/parser_test.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/parser_test-parser_test.Tpo $(DEPDIR)/parser_test-parser_test.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='examples/parser_test.c' object='parser_test-parser_test.o' libtool=no @AMDEPBACKSLASH@
+examples/parser_test-parser_test.o: examples/parser_test.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -MT examples/parser_test-parser_test.o -MD -MP -MF examples/$(DEPDIR)/parser_test-parser_test.Tpo -c -o examples/parser_test-parser_test.o `test -f 'examples/parser_test.c' || echo '$(srcdir)/'`examples/parser_test.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) examples/$(DEPDIR)/parser_test-parser_test.Tpo examples/$(DEPDIR)/parser_test-parser_test.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='examples/parser_test.c' object='examples/parser_test-parser_test.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -c -o parser_test-parser_test.o `test -f 'examples/parser_test.c' || echo '$(srcdir)/'`examples/parser_test.c
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -c -o examples/parser_test-parser_test.o `test -f 'examples/parser_test.c' || echo '$(srcdir)/'`examples/parser_test.c
 
-parser_test-parser_test.obj: examples/parser_test.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -MT parser_test-parser_test.obj -MD -MP -MF $(DEPDIR)/parser_test-parser_test.Tpo -c -o parser_test-parser_test.obj `if test -f 'examples/parser_test.c'; then $(CYGPATH_W) 'examples/parser_test.c'; else $(CYGPATH_W) '$(srcdir)/examples/parser_test.c'; fi`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/parser_test-parser_test.Tpo $(DEPDIR)/parser_test-parser_test.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='examples/parser_test.c' object='parser_test-parser_test.obj' libtool=no @AMDEPBACKSLASH@
+examples/parser_test-parser_test.obj: examples/parser_test.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -MT examples/parser_test-parser_test.obj -MD -MP -MF examples/$(DEPDIR)/parser_test-parser_test.Tpo -c -o examples/parser_test-parser_test.obj `if test -f 'examples/parser_test.c'; then $(CYGPATH_W) 'examples/parser_test.c'; else $(CYGPATH_W) '$(srcdir)/examples/parser_test.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) examples/$(DEPDIR)/parser_test-parser_test.Tpo examples/$(DEPDIR)/parser_test-parser_test.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='examples/parser_test.c' object='examples/parser_test-parser_test.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -c -o parser_test-parser_test.obj `if test -f 'examples/parser_test.c'; then $(CYGPATH_W) 'examples/parser_test.c'; else $(CYGPATH_W) '$(srcdir)/examples/parser_test.c'; fi`
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -c -o examples/parser_test-parser_test.obj `if test -f 'examples/parser_test.c'; then $(CYGPATH_W) 'examples/parser_test.c'; else $(CYGPATH_W) '$(srcdir)/examples/parser_test.c'; fi`
 
-parser_test-keydbcfg-parser.o: keydbcfg-parser.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -MT parser_test-keydbcfg-parser.o -MD -MP -MF $(DEPDIR)/parser_test-keydbcfg-parser.Tpo -c -o parser_test-keydbcfg-parser.o `test -f 'keydbcfg-parser.c' || echo '$(srcdir)/'`keydbcfg-parser.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/parser_test-keydbcfg-parser.Tpo $(DEPDIR)/parser_test-keydbcfg-parser.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='keydbcfg-parser.c' object='parser_test-keydbcfg-parser.o' libtool=no @AMDEPBACKSLASH@
+file/parser_test-keydbcfg-parser.o: file/keydbcfg-parser.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -MT file/parser_test-keydbcfg-parser.o -MD -MP -MF file/$(DEPDIR)/parser_test-keydbcfg-parser.Tpo -c -o file/parser_test-keydbcfg-parser.o `test -f 'file/keydbcfg-parser.c' || echo '$(srcdir)/'`file/keydbcfg-parser.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) file/$(DEPDIR)/parser_test-keydbcfg-parser.Tpo file/$(DEPDIR)/parser_test-keydbcfg-parser.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='file/keydbcfg-parser.c' object='file/parser_test-keydbcfg-parser.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -c -o parser_test-keydbcfg-parser.o `test -f 'keydbcfg-parser.c' || echo '$(srcdir)/'`keydbcfg-parser.c
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -c -o file/parser_test-keydbcfg-parser.o `test -f 'file/keydbcfg-parser.c' || echo '$(srcdir)/'`file/keydbcfg-parser.c
 
-parser_test-keydbcfg-parser.obj: keydbcfg-parser.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -MT parser_test-keydbcfg-parser.obj -MD -MP -MF $(DEPDIR)/parser_test-keydbcfg-parser.Tpo -c -o parser_test-keydbcfg-parser.obj `if test -f 'keydbcfg-parser.c'; then $(CYGPATH_W) 'keydbcfg-parser.c'; else $(CYGPATH_W) '$(srcdir)/keydbcfg-parser.c'; fi`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/parser_test-keydbcfg-parser.Tpo $(DEPDIR)/parser_test-keydbcfg-parser.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='keydbcfg-parser.c' object='parser_test-keydbcfg-parser.obj' libtool=no @AMDEPBACKSLASH@
+file/parser_test-keydbcfg-parser.obj: file/keydbcfg-parser.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -MT file/parser_test-keydbcfg-parser.obj -MD -MP -MF file/$(DEPDIR)/parser_test-keydbcfg-parser.Tpo -c -o file/parser_test-keydbcfg-parser.obj `if test -f 'file/keydbcfg-parser.c'; then $(CYGPATH_W) 'file/keydbcfg-parser.c'; else $(CYGPATH_W) '$(srcdir)/file/keydbcfg-parser.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) file/$(DEPDIR)/parser_test-keydbcfg-parser.Tpo file/$(DEPDIR)/parser_test-keydbcfg-parser.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='file/keydbcfg-parser.c' object='file/parser_test-keydbcfg-parser.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -c -o parser_test-keydbcfg-parser.obj `if test -f 'keydbcfg-parser.c'; then $(CYGPATH_W) 'keydbcfg-parser.c'; else $(CYGPATH_W) '$(srcdir)/keydbcfg-parser.c'; fi`
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -c -o file/parser_test-keydbcfg-parser.obj `if test -f 'file/keydbcfg-parser.c'; then $(CYGPATH_W) 'file/keydbcfg-parser.c'; else $(CYGPATH_W) '$(srcdir)/file/keydbcfg-parser.c'; fi`
 
-parser_test-keydbcfg-lexer.o: keydbcfg-lexer.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -MT parser_test-keydbcfg-lexer.o -MD -MP -MF $(DEPDIR)/parser_test-keydbcfg-lexer.Tpo -c -o parser_test-keydbcfg-lexer.o `test -f 'keydbcfg-lexer.c' || echo '$(srcdir)/'`keydbcfg-lexer.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/parser_test-keydbcfg-lexer.Tpo $(DEPDIR)/parser_test-keydbcfg-lexer.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='keydbcfg-lexer.c' object='parser_test-keydbcfg-lexer.o' libtool=no @AMDEPBACKSLASH@
+file/parser_test-keydbcfg-lexer.o: file/keydbcfg-lexer.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -MT file/parser_test-keydbcfg-lexer.o -MD -MP -MF file/$(DEPDIR)/parser_test-keydbcfg-lexer.Tpo -c -o file/parser_test-keydbcfg-lexer.o `test -f 'file/keydbcfg-lexer.c' || echo '$(srcdir)/'`file/keydbcfg-lexer.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) file/$(DEPDIR)/parser_test-keydbcfg-lexer.Tpo file/$(DEPDIR)/parser_test-keydbcfg-lexer.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='file/keydbcfg-lexer.c' object='file/parser_test-keydbcfg-lexer.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -c -o parser_test-keydbcfg-lexer.o `test -f 'keydbcfg-lexer.c' || echo '$(srcdir)/'`keydbcfg-lexer.c
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -c -o file/parser_test-keydbcfg-lexer.o `test -f 'file/keydbcfg-lexer.c' || echo '$(srcdir)/'`file/keydbcfg-lexer.c
 
-parser_test-keydbcfg-lexer.obj: keydbcfg-lexer.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -MT parser_test-keydbcfg-lexer.obj -MD -MP -MF $(DEPDIR)/parser_test-keydbcfg-lexer.Tpo -c -o parser_test-keydbcfg-lexer.obj `if test -f 'keydbcfg-lexer.c'; then $(CYGPATH_W) 'keydbcfg-lexer.c'; else $(CYGPATH_W) '$(srcdir)/keydbcfg-lexer.c'; fi`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/parser_test-keydbcfg-lexer.Tpo $(DEPDIR)/parser_test-keydbcfg-lexer.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='keydbcfg-lexer.c' object='parser_test-keydbcfg-lexer.obj' libtool=no @AMDEPBACKSLASH@
+file/parser_test-keydbcfg-lexer.obj: file/keydbcfg-lexer.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -MT file/parser_test-keydbcfg-lexer.obj -MD -MP -MF file/$(DEPDIR)/parser_test-keydbcfg-lexer.Tpo -c -o file/parser_test-keydbcfg-lexer.obj `if test -f 'file/keydbcfg-lexer.c'; then $(CYGPATH_W) 'file/keydbcfg-lexer.c'; else $(CYGPATH_W) '$(srcdir)/file/keydbcfg-lexer.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) file/$(DEPDIR)/parser_test-keydbcfg-lexer.Tpo file/$(DEPDIR)/parser_test-keydbcfg-lexer.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='file/keydbcfg-lexer.c' object='file/parser_test-keydbcfg-lexer.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -c -o parser_test-keydbcfg-lexer.obj `if test -f 'keydbcfg-lexer.c'; then $(CYGPATH_W) 'keydbcfg-lexer.c'; else $(CYGPATH_W) '$(srcdir)/keydbcfg-lexer.c'; fi`
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -c -o file/parser_test-keydbcfg-lexer.obj `if test -f 'file/keydbcfg-lexer.c'; then $(CYGPATH_W) 'file/keydbcfg-lexer.c'; else $(CYGPATH_W) '$(srcdir)/file/keydbcfg-lexer.c'; fi`
 
-parser_test-strutl.o: util/strutl.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -MT parser_test-strutl.o -MD -MP -MF $(DEPDIR)/parser_test-strutl.Tpo -c -o parser_test-strutl.o `test -f 'util/strutl.c' || echo '$(srcdir)/'`util/strutl.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/parser_test-strutl.Tpo $(DEPDIR)/parser_test-strutl.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='util/strutl.c' object='parser_test-strutl.o' libtool=no @AMDEPBACKSLASH@
+util/parser_test-strutl.o: util/strutl.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -MT util/parser_test-strutl.o -MD -MP -MF util/$(DEPDIR)/parser_test-strutl.Tpo -c -o util/parser_test-strutl.o `test -f 'util/strutl.c' || echo '$(srcdir)/'`util/strutl.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) util/$(DEPDIR)/parser_test-strutl.Tpo util/$(DEPDIR)/parser_test-strutl.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='util/strutl.c' object='util/parser_test-strutl.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -c -o parser_test-strutl.o `test -f 'util/strutl.c' || echo '$(srcdir)/'`util/strutl.c
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -c -o util/parser_test-strutl.o `test -f 'util/strutl.c' || echo '$(srcdir)/'`util/strutl.c
 
-parser_test-strutl.obj: util/strutl.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -MT parser_test-strutl.obj -MD -MP -MF $(DEPDIR)/parser_test-strutl.Tpo -c -o parser_test-strutl.obj `if test -f 'util/strutl.c'; then $(CYGPATH_W) 'util/strutl.c'; else $(CYGPATH_W) '$(srcdir)/util/strutl.c'; fi`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/parser_test-strutl.Tpo $(DEPDIR)/parser_test-strutl.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='util/strutl.c' object='parser_test-strutl.obj' libtool=no @AMDEPBACKSLASH@
+util/parser_test-strutl.obj: util/strutl.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -MT util/parser_test-strutl.obj -MD -MP -MF util/$(DEPDIR)/parser_test-strutl.Tpo -c -o util/parser_test-strutl.obj `if test -f 'util/strutl.c'; then $(CYGPATH_W) 'util/strutl.c'; else $(CYGPATH_W) '$(srcdir)/util/strutl.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) util/$(DEPDIR)/parser_test-strutl.Tpo util/$(DEPDIR)/parser_test-strutl.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='util/strutl.c' object='util/parser_test-strutl.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -c -o parser_test-strutl.obj `if test -f 'util/strutl.c'; then $(CYGPATH_W) 'util/strutl.c'; else $(CYGPATH_W) '$(srcdir)/util/strutl.c'; fi`
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -c -o util/parser_test-strutl.obj `if test -f 'util/strutl.c'; then $(CYGPATH_W) 'util/strutl.c'; else $(CYGPATH_W) '$(srcdir)/util/strutl.c'; fi`
 
-parser_test-logging.o: util/logging.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -MT parser_test-logging.o -MD -MP -MF $(DEPDIR)/parser_test-logging.Tpo -c -o parser_test-logging.o `test -f 'util/logging.c' || echo '$(srcdir)/'`util/logging.c
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/parser_test-logging.Tpo $(DEPDIR)/parser_test-logging.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='util/logging.c' object='parser_test-logging.o' libtool=no @AMDEPBACKSLASH@
+util/parser_test-logging.o: util/logging.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -MT util/parser_test-logging.o -MD -MP -MF util/$(DEPDIR)/parser_test-logging.Tpo -c -o util/parser_test-logging.o `test -f 'util/logging.c' || echo '$(srcdir)/'`util/logging.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) util/$(DEPDIR)/parser_test-logging.Tpo util/$(DEPDIR)/parser_test-logging.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='util/logging.c' object='util/parser_test-logging.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -c -o parser_test-logging.o `test -f 'util/logging.c' || echo '$(srcdir)/'`util/logging.c
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -c -o util/parser_test-logging.o `test -f 'util/logging.c' || echo '$(srcdir)/'`util/logging.c
 
-parser_test-logging.obj: util/logging.c
-@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -MT parser_test-logging.obj -MD -MP -MF $(DEPDIR)/parser_test-logging.Tpo -c -o parser_test-logging.obj `if test -f 'util/logging.c'; then $(CYGPATH_W) 'util/logging.c'; else $(CYGPATH_W) '$(srcdir)/util/logging.c'; fi`
-@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/parser_test-logging.Tpo $(DEPDIR)/parser_test-logging.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='util/logging.c' object='parser_test-logging.obj' libtool=no @AMDEPBACKSLASH@
+util/parser_test-logging.obj: util/logging.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -MT util/parser_test-logging.obj -MD -MP -MF util/$(DEPDIR)/parser_test-logging.Tpo -c -o util/parser_test-logging.obj `if test -f 'util/logging.c'; then $(CYGPATH_W) 'util/logging.c'; else $(CYGPATH_W) '$(srcdir)/util/logging.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) util/$(DEPDIR)/parser_test-logging.Tpo util/$(DEPDIR)/parser_test-logging.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='util/logging.c' object='util/parser_test-logging.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -c -o parser_test-logging.obj `if test -f 'util/logging.c'; then $(CYGPATH_W) 'util/logging.c'; else $(CYGPATH_W) '$(srcdir)/util/logging.c'; fi`
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(parser_test_CFLAGS) $(CFLAGS) -c -o util/parser_test-logging.obj `if test -f 'util/logging.c'; then $(CYGPATH_W) 'util/logging.c'; else $(CYGPATH_W) '$(srcdir)/util/logging.c'; fi`
 
 .l.c:
-	$(am__skiplex) $(SHELL) $(YLWRAP) $< $(LEX_OUTPUT_ROOT).c $@ -- $(LEXCOMPILE)
-
-keydbcfg-lexer.c: file/keydbcfg-lexer.l
-	 \
-	$(am__skiplex) \
-	$(SHELL) $(YLWRAP) `test -f 'file/keydbcfg-lexer.l' || echo '$(srcdir)/'`file/keydbcfg-lexer.l $(LEX_OUTPUT_ROOT).c keydbcfg-lexer.c -- $(LEX) $(AM_LFLAGS) $(LFLAGS)
+	$(AM_V_LEX)$(am__skiplex) $(SHELL) $(YLWRAP) $< $(LEX_OUTPUT_ROOT).c $@ -- $(LEXCOMPILE)
 
 .y.c:
-	$(am__skipyacc) $(SHELL) $(YLWRAP) $< y.tab.c $@ y.tab.h $*.h y.output $*.output -- $(YACCCOMPILE)
-
-keydbcfg-parser.c: file/keydbcfg-parser.y
-	 \
-	$(am__skipyacc) \
-	$(SHELL) $(YLWRAP) `test -f 'file/keydbcfg-parser.y' || echo '$(srcdir)/'`file/keydbcfg-parser.y y.tab.c keydbcfg-parser.c y.tab.h keydbcfg-parser.h y.output keydbcfg-parser.output -- $(YACC) $(AM_YFLAGS) $(YFLAGS)
+	$(AM_V_YACC)$(am__skipyacc) $(SHELL) $(YLWRAP) $< y.tab.c $@ y.tab.h `echo $@ | $(am__yacc_c2h)` y.output $*.output -- $(YACCCOMPILE)
 
 mostlyclean-libtool:
 	-rm -f *.lo
 
 clean-libtool:
 	-rm -rf .libs _libs
+	-rm -rf file/.libs file/_libs
+	-rm -rf libaacs/.libs libaacs/_libs
+	-rm -rf util/.libs util/_libs
 install-pkgconfigDATA: $(pkgconfig_DATA)
 	@$(NORMAL_INSTALL)
 	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
@@ -782,26 +851,15 @@
 	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 	dir='$(DESTDIR)$(pkgincludedir)'; $(am__uninstall_files_from_dir)
 
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files$$0 = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 	set x; \
 	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files$$0 = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	$(am__define_uniq_tagged_files); \
 	shift; \
 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
@@ -813,15 +871,11 @@
 	      $$unique; \
 	  fi; \
 	fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files$$0 = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
 	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$unique
@@ -830,6 +884,21 @@
 	here=`$(am__cd) $(top_builddir) && pwd` \
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  \\/* | ?:\\/*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -905,13 +974,21 @@
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-rm -f examples/$(DEPDIR)/$(am__dirstamp)
+	-rm -f examples/$(am__dirstamp)
+	-rm -f file/$(DEPDIR)/$(am__dirstamp)
+	-rm -f file/$(am__dirstamp)
+	-rm -f libaacs/$(DEPDIR)/$(am__dirstamp)
+	-rm -f libaacs/$(am__dirstamp)
+	-rm -f util/$(DEPDIR)/$(am__dirstamp)
+	-rm -f util/$(am__dirstamp)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
 	@echo "it deletes files that may require special tools to rebuild."
-	-rm -f keydbcfg-lexer.c
-	-rm -f keydbcfg-parser.c
-	-rm -f keydbcfg-parser.h
+	-rm -f file/keydbcfg-lexer.c
+	-rm -f file/keydbcfg-parser.c
+	-rm -f file/keydbcfg-parser.h
 	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
 clean: clean-am
 
@@ -919,7 +996,7 @@
 	clean-libtool clean-noinstPROGRAMS mostlyclean-am
 
 distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
+	-rm -rf examples/$(DEPDIR) file/$(DEPDIR) libaacs/$(DEPDIR) util/$(DEPDIR)
 	-rm -f Makefile
 distclean-am: clean-am distclean-compile distclean-generic \
 	distclean-tags
@@ -965,7 +1042,7 @@
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
+	-rm -rf examples/$(DEPDIR) file/$(DEPDIR) libaacs/$(DEPDIR) util/$(DEPDIR)
 	-rm -f Makefile
 maintainer-clean-am: distclean-am maintainer-clean-generic
 
@@ -987,23 +1064,23 @@
 
 .MAKE: all check install install-am install-strip
 
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
-	clean-generic clean-libLTLIBRARIES clean-libtool \
-	clean-noinstPROGRAMS ctags dist-hook distclean \
-	distclean-compile distclean-generic distclean-libtool \
-	distclean-tags distdir dvi dvi-am html html-am info info-am \
-	install install-am install-binPROGRAMS install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-libLTLIBRARIES install-man install-pdf \
-	install-pdf-am install-pkgconfigDATA install-pkgincludeHEADERS \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	tags uninstall uninstall-am uninstall-binPROGRAMS \
-	uninstall-libLTLIBRARIES uninstall-pkgconfigDATA \
-	uninstall-pkgincludeHEADERS
+.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean \
+	clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
+	clean-libtool clean-noinstPROGRAMS cscopelist-am ctags \
+	ctags-am dist-hook distclean distclean-compile \
+	distclean-generic distclean-libtool distclean-tags distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-binPROGRAMS install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am \
+	install-libLTLIBRARIES install-man install-pdf install-pdf-am \
+	install-pkgconfigDATA install-pkgincludeHEADERS install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
+	uninstall-am uninstall-binPROGRAMS uninstall-libLTLIBRARIES \
+	uninstall-pkgconfigDATA uninstall-pkgincludeHEADERS
 
 
 clean-lex-yacc:

libaacs-0.7.0.tar.bz2/src/libaacs/aacs-version.h -> libaacs-0.7.1.tar.bz2/src/libaacs/aacs-version.h Changed

libaacs-0.7.0.tar.bz2/src/libaacs/aacs.c -> libaacs-0.7.1.tar.bz2/src/libaacs/aacs.c Changed

@@ -431,63 +431,6 @@
     return AACS_ERROR_CORRUPTED_DISC;
 }
 
-static MKB *_get_hrl_mkb(MMC *mmc)
-{
-    MKB     *mkb = NULL;
-    uint8_t *data;
-    int      mkb_size;
-
-    data = mmc_read_mkb(mmc, 0, &mkb_size);
-
-    /* check acquired hrl signature */
-    if (data && mkb_size > 0) {
-        if (_rl_verify_signature(data, mkb_size)) {
-            mkb = mkb_init(data, mkb_size);
-            DEBUG(DBG_AACS, "Partial hrl mkb read. Version: %d\n", mkb_version(mkb));
-        } else {
-            DEBUG(DBG_AACS | DBG_CRIT, "invalid host revocation list signature, not using it\n");
-            X_FREE(data);
-        }
-    }
-
-    if (mkb) {
-        /* use latest version, keep cache up-to-date */
-        uint32_t size;
-        size = mkb_data_size(mkb);
-        data = cache_get_or_update("hrl", mkb_data(mkb), &size, mkb_version(mkb));
-
-        if (!_rl_verify_signature(data, size)) {
-            DEBUG(DBG_AACS | DBG_CRIT, "invalid cached host revocation list signature, replacing it\n");
-            cache_save("hrl", mkb_version(mkb), mkb_data(mkb), mkb_data_size(mkb));
-            X_FREE(data);
-        } else {
-            /* use cached version */
-            mkb_close(mkb);
-            mkb = mkb_init(data, size);
-        }
-
-    } else {
-        /* use cached version */
-        uint32_t size;
-        data = cache_get_or_update("hrl", NULL, &size, 0);
-        if (data && size > 0) {
-            if (_rl_verify_signature(data, size)) {
-                mkb = mkb_init(data, size);
-            } else {
-                DEBUG(DBG_AACS | DBG_CRIT, "invalid cached host revocation list signature, deleting cache\n");
-                cache_remove("hrl");
-            }
-        }
-    }
-
-
-    if (mkb) {
-        DEBUG(DBG_AACS, "Using hrl version %d\n", mkb_version(mkb));
-    }
-
-    return mkb;
-}
-
 static int _mmc_read_auth(AACS *aacs, cert_list *hcl, int type, uint8_t *p1, uint8_t *p2)
 {
     MMC* mmc = NULL;
@@ -497,7 +440,6 @@
 
     int error_code = AACS_ERROR_NO_CERT;
 
-    MKB *hrl_mkb = _get_hrl_mkb(mmc);
     const uint8_t *drive_cert = mmc_get_drive_cert(mmc);
 
     for (; hcl ; hcl = hcl->next) {
@@ -510,13 +452,6 @@
             continue;
         }
 
-        if (mkb_host_cert_is_revoked(hrl_mkb, hcl->host_cert + 4) > 0) {
-            DEBUG(DBG_AACS | DBG_CRIT, "Host certificate %s has been revoked.\n",
-                  print_hex(tmp_str, hcl->host_cert + 4, 6));
-            error_code = AACS_ERROR_CERT_REVOKED;
-            //continue;
-        }
-
         if (drive_cert && (drive_cert1 & 0x01) && !(hcl->host_cert1 & 0x01)) {
             DEBUG(DBG_AACS, "Certificate (id 0x%s) does not support bus encryption\n",
                   print_hex(tmp_str, hcl->host_cert + 4, 6));
@@ -529,7 +464,6 @@
         int mmc_result = mmc_read_auth(mmc, hcl->host_priv_key, hcl->host_cert, type, p1, p2);
         switch (mmc_result) {
             case MMC_SUCCESS:
-                mkb_close(hrl_mkb);
                 mmc_close(mmc);
                 return AACS_SUCCESS;
             case MMC_ERROR_CERT_REVOKED:
@@ -542,7 +476,6 @@
         }
     }
 
-    mkb_close(hrl_mkb);
     mmc_close(mmc);
 
     return error_code;

libaacs-0.7.0.tar.bz2/src/libaacs/crypto.c -> libaacs-0.7.1.tar.bz2/src/libaacs/crypto.c Changed

@@ -127,6 +127,9 @@
         if (!gcry_check_version(GCRYPT_VERSION)) {
             crypto_init_check = 0;
         }
+        if(GCRYPT_DEBUG) {
+            gcry_control(GCRYCTL_SET_DEBUG_FLAGS, 3);
+        }
     }
 
     return crypto_init_check;
@@ -297,14 +300,14 @@
     char *strfmt = str_printf(
       "(%s"
       "(ecdsa"
-      "(p #"AACS_EC_p"#)"
-      "(a #"AACS_EC_a"#)"
-      "(b #"AACS_EC_b"#)"
+      "(p #00"AACS_EC_p"#)"
+      "(a #00"AACS_EC_a"#)"
+      "(b #00"AACS_EC_b"#)"
       "(g #04"
           AACS_EC_G_x
           AACS_EC_G_y
           "#)"
-      "(n #"AACS_EC_n"#)"
+      "(n #00"AACS_EC_n"#)"
       "(q #%s#)"
       "%s))",
       mpi_d ? "private-key" : "public-key",
@@ -352,7 +355,16 @@
     GCRY_VERIFY("gcry_sexp_build",
                 gcry_sexp_build(p_sexp_data, NULL,
                                 "(data"
+#if defined(GCRYPT_VERSION_NUMBER) && GCRYPT_VERSION_NUMBER >= 0x010600
+                                /*
+                                 * For some reason gcrypt 1.6.0
+                                 * requires 'param' flag here and not
+                                 * in key, probably a bug.
+                                 */
+                                "  (flags raw param)"
+#else
                                 "  (flags raw)"
+#endif
                                 "  (value %m))",
                                 mpi_md
                                 ));

Overview

Request 1488 (accepted)

Request History