Packman Build Service PMBS

File h264enc.spec of Package h264enc (Revision d307516cf202d27dffc5e019dfe68ba9)

Currently displaying revision d307516cf202d27dffc5e019dfe68ba9 , Show latest

# norootforbuild

Name:		h264enc
Version:	10.1.1
Release:	1

License:	GPL-2.0+
Group:		Productivity/Multimedia/Video/Editors and Convertors
Summary:	An advanced CLI shell script for MEncoder
URL:		http://h264enc.sourceforge.net/

Source0:        %{name}-%{version}.tar.gz

BuildRoot:      %{_tmppath}/%{name}-%{version}-build
BuildArch:	noarch

Requires:       findutils gpac bc gawk lsdvd nano ogmtools vorbis-tools opus-tools flac aften dcaenc mailx faac MPlayer mkvtoolnix pv

%description
h264enc is an advanced and powerful interactive menu-driven shell script written
for the GNU/Linux operating system which can help you to encode a DVD, a video file,
a directory with video files or a (S)VCD to the H.264/MPEG-4 Part 10/AVC video format
using the MEncoder encoder from the MPlayer project and the libx264 library. It supports
muxing the final encode from AVI to MKV, from AVI to OGM, from AVI to TS and from
AVI to the MP4 container.

%prep
%setup -q -n %{name}-%{version}

%build

%install
%__mkdir -p %{buildroot}/%{_docdir}/%{name}/matrices

# binary
%__install -D -m 755 %{name} %{buildroot}/%{_bindir}/%{name}

# man
gzip -9 man/%{name}.1
%__install -D -m 644 man/%{name}.1.gz %{buildroot}/%{_mandir}/man1/%{name}.1.gz

# doc
%__install -m 644 doc/* %{buildroot}/%{_docdir}/%{name}
%__install -m 644 matrices/* %{buildroot}/%{_docdir}/%{name}/matrices

%clean
rm -rf "%{buildroot}"

%files
%defattr(-,root,root)
%{_bindir}/%{name}
%{_mandir}/man1/%{name}.1.gz
%{_docdir}/%{name}

%changelog
* Thu Jun 19 2014 Grozdan Nikolov <neutrino8@gmail.com> 10.1.1
	* Added support for the internal lavc AC-3 audio encoder. Now one
	  can choose between the lavc encoder (default) and the aften encoder.
	  The lavc encoder is set to default as aften has seen very little
	  development in the past years and is not as good as the lavc one
	  which is actively developed by the ffmpeg devs
	* Fine-tune the volume filter by setting it to 4 after some tests
	* Delete the file stored in the $AUDINFO variable
	* When storing the MKV global tags while operating in batch mode,
	  test the variable $DIRTAGS for not being empty
	* Cosmetics: add a few echo's at specific places to separate the
	  cmd lines in the batch file for better readability. Also add
	  a comment block for the start of the MKV, MP4, TS and/or OGM muxing
	* Bugfix in the MKV/MP4 tags: do not add channel info when using MP3.
	  If we add channel info, it could result in "MP3 5.1" being added
	  to the audio tags, which is obviously wrong as MP3 only supports
	  stereo and mono channels
	* Opus supports sampling rates from 8 kHz to 48 kHz. Support this
	  in the resampling code
	  
* Wed Jun 18 2014 Grozdan Nikolov <neutrino8@gmail.com> 10.1.0
	* When scanning for audio tracks when input is file or blu-ray,
	  rename DCA (as reported by lavf) to DTS to not confuse the user.
	  Also rename AC3 to AC-3 for consistency
	* In case audio encoder is fdkaac, add to the MKV tags the audio
	  format used (eg, Signed 16-bit little endian)
	* When dumping chapters from files, use the file extension .chaps
	  for MKV. Also test to see if there's already a chapters file with
	  the same name and rename it to <filename>.chaps.old
	* aac-enc name in the MKV tags is not very descriptive, so add
	  (fdkaac) to it
	* Cosmetics
	
* Tue Jun 17 2014 Grozdan Nikolov <neutrino8@gmail.com> 10.0.9
	* Bugfix: only call audio filters on subsequent tracks when running MPlayer
	  to decode since for the first track we already pass these filters to
	  MEncoder, thus if we also use them when running MPlayer we'll get a
	  double effect
	* Add a ^ (caret) at the beginning of grep when trying to get the [lavf]
	  text to make sure we only grep the correct instances
	* Set default CRF/QP value to 19 and for bitrate based encodes to 2000 kbps
	* For the volume audio filter, set the default value to 3 as 5 is a bit high
	
* Mon Jun 16 2014 Grozdan Nikolov <neutrino8@gmail.com> 10.0.8
	* New method to detect and display audio info when input is file or blu-ray.
	  In comparison to the previous basic method, the new one will display
	  for each found audio track the codec, channels, language, bitrate and
	  sample rate info. It does take slightly longer to detect in case there
	  are many audio tracks, but it is more descriptive and accurate
	  
* Sun Jun 15 2014 Grozdan Nikolov <neutrino8@gmail.com> 10.0.7
	* Use an if instead of a case when dumping chapters from files
	* Also export chapter extraction commands to the batch file
	* Display mkvextract availability when using the sanity check option (-sc)
	* Add the path and name to the comment block of the batch file. Makes
	  it easy to focus on the comment block to know for which file the
	  commands are instead of needing to inspect the code itself to find
	  out
	  
* Wed Jun 11 2014 Grozdan Nikolov <neutrino8@gmail.com> 10.0.6
	* Added support for dumping chapters info from MKV/MP4 input files
	  This updates the config file version to 30 as mkvextract is needed
	* Made the audiofmt variable an array variable
	* Moved asking for sample encoding before asking to inspect or save the
	  options to a file
	  
* Sat May 24 2014 Grozdan Nikolov <neutrino8@gmail.com> 10.0.5
	* Fixed the detect_fps_func() function for detecting the NTSC type
	* Lowered the spugauss (variance param for gauss subtitle scaling)
	  from 0.7 to 0.4 as 0.7 does too much blurring in my opinion
	  
* Thu May 22 2014 Grozdan Nikolov <neutrino8@gmail.com> 10.0.4
	* Bugfix: $demuxer var was missing in the AUDCH array var which resulted
	  in incorrect channel info being added to the tags when copying audio.
	  DVD input was not affected by this bug, but file/dir/bd input was as
	  they all use the $demuxer var
	  
* Sat Apr 26 2014 Grozdan Nikolov <neutrino8@gmail.com> 10.0.3
	* Removed unused $AUDFIFO variable
	* Small bugfix: audio language for metadata tagging wasn't added to the global
	  tags for MKV when input is Blu-ray due to missing 'bd' param in the case
	  statement
	  
* Wed Apr 23 2014 Grozdan Nikolov <neutrino8@gmail.com> 10.0.2
	* Bugfix: in case user chooses audio copy, the metadata info for tagging
	  always defaulted to "Stereo". Fix this by running MPlayer to detect
	  the proper amount of channels
	  
* Tue Apr 22 2014 Grozdan Nikolov <neutrino8@gmail.com> 10.0.1
	* Bugfix: wrong var used, $chanuse instead of $chandec, for setting
	  the decode channels
	* Only call the video_subtitles_scale_func() function if the user
	  actually provides an external sub for hardcoding
	  
* Thu Apr 17 2014 Grozdan Nikolov <neutrino8@gmail.com> 10.0.0
	* Allow the video_subtitles_align_func() function for mks matroska
	  subtitles
	* Display the warning message in red for when something goes wrong
	  when importing/hardcoding subs. Do the same for when checking
	  support for a sub format for MKV/MP4/OGM
	* Added support for subtitles for Blu-ray encodings. Note that only
	  hardcoding of external sub or importing of external subs into the
	  MKV/MP4/OGM containers is supported
	* Removed some duplication by placing the code for hardcoding an
	  external sub or importing external subs into its own
	  video_subtitles_option_func() function
	* Increased the rc_lookahead value for the ehq, uhq and ihq presets
	  to 80, 90 and 100, respectively
	* When copying audio and using some of the portable device presets,
	  also add the -mc 0 -msglevel demuxer=-1 options to MEncoder
	* More code optimizations and minor fixes
	
* Wed Apr 16 2014 Grozdan Nikolov <neutrino8@gmail.com> 9.9.8
	* Use proper extensions when copying the audio as MP4Box has a
	  problem with recognizing the .raw extension
	* Renamed the named pipe from audio.wav to audio.pipe. Also
	  placed it in a variable to reduce some minor duplication
	* Added support for subtitle scaling for when hardcoding an
	  external sub or hardcoding an embedded one. Requested by
	  lib3rty1 from the the Doom9.org forum
	* Added --no-chapters option to mkvmerge for when encoding
	  with neroAacEnc in order not to auto-copy chapters info
	  from the container
	* Instead of defaulting to 0 kbps if we can't detect the audio
	  bitrate when copying audio and needing to calculate the video
	  bitrate for a target file size , ask the user to provide it
	  in case he knows it or can figure it out
	* Set the default exponent strategy value for AC-3 to 16
	* Placed frequently used MPlayer options into a single variable,
	  $MPOPTS, in order not to write them over and over again when
	  we need them. These options are not used everywhere as
	  sometimes we need other specific ones when detecting something
	* Improved priority level checks for regular users if the PRIORITY
	  variable is set in the config file
	* Bugfix: audio resampling was not possible for Blu-rays due to
	  missing bd param in the case statement
	* Merge the Blu-ray output code with that of the file/vcd as it's
	  identical
	* Some minor code optimizations
	
* Tue Apr 15 2014 Grozdan Nikolov <neutrino8@gmail.com> 9.9.7
	* Allow the channels filter for the portable device presets
	* Reorder the audio filters positions
	* Placed the $MENCOPTS variable in front in MEncoder in order
	  for it to not overwrite the options already set
	* For AC-3 audio, default to 384 kbps instead of 192 kbps and
	  default to "Film Standard" as DRC profile
	* For MP3 audio, default to 192 kbps instead of 128 kbps when
	  doing CBR encodes and to "standard" when using a preset
	* For NEROAAC and FDKAAC, default to 128 kbps instead of 96 kbps
	  when using LC-AAC mode
	* Better wording in what the Output option does in the
	  audio_channels_decode_func() function
	* Modification to the audio_codec_exit_func() function. Use this
	  function also to exit in case of an unsupported audio codec.
	  By using this function, some repeatability is removed
	* Fixed a bug in the PCM audio code for the calculation of video
	  bitrate for a target file size. Variable $AUDIO_BITRATE
	  should be an array variable instead of a normal one
	* Added support for Blu-ray angle encoding
	* Reduced some duplication by placing the message into a single
	  variable when we exit in case an audio encoder is missing
	* MEncoder currently has issues with copying audio. Work it
	  around by using -mc 0 -msglevel demuxer=-1 options which disable
	  its automatic A/V sync. With this, MEncoder may report 0 or some
	  large random number on some files for the audio but one can safely
	  ignore it. Audio is still being copied
	* If the user chooses audio copy and selects to remux the encode
	  to MKV, the global tags did not contain the audio encoder string.
	  Fix this by adding "Unknown (Stream Copy)" since we don't know
	  which program was used to encode the audio
	* In case we try to copy AAC audio from the input, we need to pass
	  the correct format to MEncoder or it will error out. Thus, use
	  -fafmttag 0x706d if we detect AAC
	* Fixed a bug where copying AAC audio as as subsequent track
	  did not result in that track being added when remuxing to MP4
	  due to a missing ffaac param in the case statement
	* When doing video bitrate calculations for a target file size and
	  copying the audio, try to better detect the audio bitrate. If we
	  can't detect it or it's reported as 0 kbps, default to 0 kbps
	* Small improvements and cleanups here and there
	
* Sun Apr 13 2014 Grozdan Nikolov <neutrino8@gmail.com> 9.9.6
	* Rewrote the audio_channels_decode_func() function. It is now
	  possible to output channels different that the decoded
	  channels amount. Note that this filter is very basic which
	  means it will output silent channels if the decoded channels
	  are less than the output channels
	* Added chanfilter variable to the aac_hev2_func() function
	* Support all supported channels in the PCM bitrate code for
	  target file size calculation
	* Removed channels variable for MEncoder when copying audio
	  for subsequent tracks as it has no effect
	* Display an informative message if the user has set a default
	  audio codec in the config file. Also check if we support it
	  or print an error message and exit
	* Updated the channels metadata info code due to changes in the
	  audio_channels_decode_func() function
	* Modifications to the audio_filters_func() and audio_filters_var_func()
	  functions
	* Some small code cleanups
	
* Sat Apr 12 2014 Grozdan Nikolov <neutrino8@gmail.com> 9.9.5
	* Improved resolution detection for Blu-rays
	* Improved the nlq preset
	* Don't call the audio_channels_decode_func when copying the audio as
	  audio is copied 1:1 thus we don't need to set any channels
	* Insert the channels filter in case the user wishes to have 4 or 5
	  audio channels when decoding higher or lower amount of channels
	* Various small code improvements
	
* Sat Apr 12 2014 Grozdan Nikolov <neutrino8@gmail.com> 9.9.4
	* Cosmetics: add an echo between the total found titles for Blu-ray and
	  the info about each title
	* Cosmetics: remove double-quotes in empty echo's
	* Display full seconds value for each found Blu-ray title
	* Small code optimization to Blu-ray chapters info. Use a single variable
	  that holds the title we need to scan for chapters
	* Warn and fallback to 8 channels in case user provides more than 8 channels
	* Added support for PCM audio for subsequent audio tracks
	
* Thu Apr 10 2014 Grozdan Nikolov <neutrino8@gmail.com> 9.9.3
	* Display the length in seconds and minutes for every found Blu-ray title
	* Implemented basic chapters encoding support for Blu-rays
	* Rewrote the code for subtitles imports for MKV/MP4/OGM
	* For DVDs/BDs, set default channels value to 6 when using other than copy
	  for audio
	  
* Wed Apr 09 2014 Grozdan Nikolov <neutrino8@gmail.com> 9.9.2
	* Allow importing of mks (Matroska stream) subtitles into MKV. Such files
	  are usually created when dumping subs with the GUI version of mkvmerge
	* Add -nosub when importing external subtitles into MKV/MP4/OGM to prevent
	  auto-loading of any embedded subs in the input file
	* Use case statements to check the values of the $MAX_AMOUNT_AUD_TRACKS and
	  $MAX_AMOUNT_SUBS variables
	* Auto-cropping was not possible when input is Blu-ray due to missing bd
	  param in the case statement
	* Set default audio channels decode option to 6 when input is Blu-ray
	
* Tue Apr 08 2014 Grozdan Nikolov <neutrino8@gmail.com> 9.9.1
	* Fixed not being able to calculate video bitrate for target file size
	  when input is Blu-ray, due to missing $demuxer variable when calling
	  MPlayer
	* Fixed DVD scanning in the -scan option
	* Support Blu-ray scanning in the -scan option
	* Display in the -sc option if MEncoder has Blu-ray support
	* Warn and exit if user chooses Blu-ray as input but MEncoder doesn't support it
	* Placed the $device and $vid variables after the $MPLAYEROPTS one in order for
	  the custom MPlayer options not to possibly overwrite these variables
	* Modified the get_devices_func() function to allow files/folders as input
	  so that a user can scan a DVD ISO or VIDEO_TS directory, not just discs
	* Fixed the colorprim code. $device and $vid variables were missing when
	  calling MPlayer to get the resolution height
	  
* Mon Apr 07 2014 Grozdan Nikolov <neutrino8@gmail.com> 9.9.0
	* Initial, basic support for encoding from Blu-ray discs/ISOs/directories.
	  Requires MPlayer to be compiled with libbluray. As libbluray doesn't
	  support encrypted Blu-rays, it is not possible to encode such Blu-rays.
	  Encryption must first be stripped before encoding with h264enc
	* Reduced some duplication in the audio code for the first track for MKV
	* Adjusted the vbv_maxrate and vbv_bufsize for the bd40 and bdhq40 presets
	  to comply with the level limits
	  
* Sat Mar 29 2014 Grozdan Nikolov <neutrino8@gmail.com> 9.8.7
	* Merged the neroaac/fdkaac part of the MP4Box code as they're identical
	* Use a case statement to decide between --bluray and --avchd for tsMuxeR
	* A few more function renaming to carry the _func at the end
	
* Fri Mar 28 2014 Grozdan Nikolov <neutrino8@gmail.com> 9.8.6
	* Fix a syntax error
	
* Fri Mar 28 2014 Grozdan Nikolov <neutrino8@gmail.com> 9.8.5
	* Use a single variable for keyint for the Blu-ray/AVCHD presets. Reduces a bit of duplication
	* Reduced some duplication in the check_audio_codec_func() function by moving some of
	  the error messages into a new audio_codec_exit_func() function
	* Allow muxing to TS when using neroAacEnc and/or FDKAAC in LC-AAC mode
	* Merged the NEROAAC/FDKAAC parts in the mkvmerge code as they're identical, thus we
	  reduce a bit of duplication
	* Updated the man page
	
* Mon Mar 24 2014 Grozdan Nikolov <neutrino8@gmail.com> 9.8.4
	* Add audio encoder info to the MKV global tags
	* Renamed the mencoder_opts() function to mencoder_opts_func() for consistency reasons
	* Fixed subtitles metadata info in the MKV global tags
	
* Sun Mar 23 2014 Grozdan Nikolov <neutrino8@gmail.com> 9.8.3
	* Bugfix: If using nosound and dumping subsequent subs, the audio option
	  for MEncoder was set to -ao null which is not recognized by MEncoder.
	  Change it to -nosound instead
	  
* Sat Mar 22 2014 Grozdan Nikolov <neutrino8@gmail.com> 9.8.2
	* Bugfix: for subsequent audio tracks, when using neroAacEnc as encoder,
	  the value of --aac-is-sbr used for HE-AAC by mkvmerge was set to 1:1. It
	  should be 0:1
	* Use the AACTYPE variable instead of the aacprof variable to check which
	  type of AAC the user wants in the neroaac_audio_func() function
	* In VBR mode for audio encoders that support it, indicate which values
	  result in better quality, ie based on the encoder a lower value results
	  in higher quality or the reverse
	  
* Fri Mar 21 2014 Grozdan Nikolov <neutrino8@gmail.com> 9.8.1
	* Set the default crop rounding value to 4 for more accurate cropping
	* Initial support for the FDK AAC audio encoder. Requires latest git from
	  https://github.com/mstorsjo/fdk-aac/commits/read-streamed-wav
	  
* Thu Feb 13 2014 Grozdan Nikolov <neutrino8@gmail.com> 9.8.0
	* Bugfix: dumping subs did not work when input is a VIDEO_TS DVD folder.
	  Patch by Harry Gunnarsson
	  
* Sun Feb 02 2014 Grozdan Nikolov <neutrino8@gmail.com> 9.7.9
	* Added support for hardcoding embedded subtitles in files
	* Use -nosub for hadrcoding an external subtitle to prevent
	  auto-loading of any embedded subtitles in the input
	* Use -ao null instead of -nosound
	
* Sat Jan 18 2014 Grozdan Nikolov <neutrino8@gmail.com> 9.7.8
	* New variable in the config file, DELETE_AVI_AFTER_REMUX, to automatically delete
	  the AVI file after remuxing. This updates the config file version to 27
	* Renamed the 480 and 576 params of the colorprim_func() function to ntsc and pal
	
* Fri Jan 03 2014 Grozdan Nikolov <neutrino8@gmail.com> 9.7.7
	* Allow relative paths when storing options to the batchfile
	* Updated copyright dates
	
* Fri Nov 15 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.7.6
	* Allow importing of PGS subtitles into the MKV container
	* Improved chapters file handling for MKV/MP4/OGM when input is file
	
* Fri Nov 08 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.7.5
	* Added support for importing a chapters file for MKV/MP4/OGM when input is file
	* Added support for setting the audio language code for MKV/MP4/OGM/TS when input is file
	* Added support for setting the subtitle language code when importing subs into MKV/MP4/OGM
	
* Sat Nov 02 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.7.4
	* Fixed copying of E-AC-3 audio
	* Set default value for 3D frame packing to 3 (side by side)
	* Moved some audio selection code into the new set_audio_codec_func() function.
	  Reduces some code duplication and removes the default_audio_codec_func() function
	  
* Fri Nov 01 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.7.3
	* Merged the file and dvd audio detection/selection code
	* Merged the audio code for the first and subsequent tracks
	* Set a default audio ID based on input (ie, 0 for file and 128 for DVD)
	* Use -demuxer lavf for file and dir input
	* Small improvements to the subtitles code
	* Renamed the -help switch to -h
	* Improved the way audio tracks information is presented to the user
	* Make destination dir if it doesn't exist for saving to the batchfile
	* Updated the man page
	
* Thu Oct 31 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.7.2
	* Fixed exporting of the NERORMAUD variable to the batch file
	* Implemented support for virtually an infinite amount of subtitles. This introduces a new
	  variable, MAX_AMOUNT_SUBS, to the config file where the user can set the amount of subtitles
	  he/she wants h264enc to support
	* Added output name to the message of the mail notification feature
	* Fixed the nosound audio option
	* Renamed the rmtemp() function to exit_func()
	* Return proper exit codes. 0 on success, 1 on error and 2 on user interrupt
	
* Wed Oct 30 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.7.1
	* Enabled multi-channel support for Opus audio
	* Moved the MKV audio filters metadata after the audio codec/language metadata
	* Fixed copy and pcm audio encoding
	* If user chooses PCM for subsequent audio tracks, don't error out but just skip the track
	* Some minor clean-ups
	
* Tue Oct 29 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.7.0
	* Fix copying of subsequent audio tracks
	
* Tue Oct 29 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.6.9
	* Various bugfixes for multi-track audio support
	
* Tue Oct 29 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.6.8
	* Added -demuxer lavf for more reliable detection of audio streams in file input mode
	* Implemented virtually infinite support for the amount of audio tracks. This introduces
	  a new variable in the config file, MAX_AMOUNT_AUD_TRACKS, where the user can specify
	  how many audio tracks he/she wants h264enc to support.
	  
* Mon Oct 28 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.6.7
	* Implemented support for 2nd and 3rd audio track when using "file" as input
	* Bugfix: when using Opus audio, calculating target file size was not possible
	* Added support for setting the AC-3 Exponent strategy search size
	* Allow applying an LFE filter to the AC-3 audio
	* Improved aften and opusenc options passing
	
* Mon Oct 28 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.6.6
	* Added support for the Opus audio codec. Requires opusenc and a recent version of
	  mkvtoolnix with support for Opus
	* Updated the man page
	
* Sun Oct 27 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.6.5
	* Bugfix: codec detection for 2nd and 3rd audio track from DVDs did not work correctly
	
* Sat Oct 26 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.6.4
	* Restrict the AVCHD presets to AC-3 and COPY audio
	* Update the audio selection for the Blu-ray presets. DTS audio was supported but it
	  wasn't displayed in the selection
	* Renamed function track_echo_func() to audio_track_echo_func() for consistency
	
* Wed Oct 23 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.6.3
	* Added support for setting the Dynamic Range Compression (DRC) profile for AC-3 audio
	* Renamed aften $AC3 variable to $AC3ENC
	* Use AC-3 instead of AC3 naming in metadata info
	
* Tue Oct 22 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.6.2
	* Added -readtoeof 1 option to the aften AC3 encoder. This ignores WAV header signaling
	  and fixes encoding from a named pipe
	  
* Sun Oct 20 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.6.1
	* Added support for encoding to 640 kbps AC3 audio
	
* Tue Jul 02 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.6.0
	* Fix audio TID for MKV when using neroAacEnc as encoder
	
* Tue Jun 11 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.5.9
	* Set correct color prims, transfers and matrix coeffs for Blu-ray/AVCHD SD resolutions
	* Removed space between two questions
	* Removed the sd* and hd* presets. They are useless
	* Updated the man page
	
* Tue Jun 11 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.5.8
	* Set VBV maxrate to 18k and VBV bufsize to 17k for the AVCHD presets
	* Added support for frame packing for 3D video
	* Add fake_interlaced to the AVCHD presets
	
* Mon Jun 10 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.5.7
	* Add fake_interlaced flag to 25fps/29.970fps content when using the Blu-ray presets. It allows
	  to encode progressive 25p and 30p content but flags it as interlaced for Blu-ray compliance
	  
* Sun Jun 09 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.5.6
	* Add rc_lookahead to the Blu-ray/AVCHD presets
	* When input is file, detect and display info about audio codec, channels, sample rate and bitrate
	
* Sat Jun 08 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.5.5
	* Enable weightp for the Blu-ray/AVCHD HQ presets. In order to have a broader compatibility
	  with older Blu-ray players (mostly ones with buggy MediaTek chips), weightp is set to 1 and not 2
	* Set VBV maxrate to 40000 and VBV buffer to 30000 for the Blu-ray presets
	* Set color primaries, transfer characteristics and matrix coeffs to bt709 for the Blu-ray/AVCHD presets
	* Set default position of the expand filter to after the scale filter
	
* Fri Jun 07 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.5.4
	* Improved the expand filter code
	* Optimized the Blu-ray/AVCHD HQ presets for better quality
	
* Wed May 29 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.5.3
	* Removed workarounds for older MP4Box versions. As of this release, only gpac 0.5.0 and higher
	  is supported. SVN version is highly recommended, though
	* Improved AC3 and MP3 audio handling
	* Removed turbo option. It is no longer needed
	* When using AC3 audio, language TID for MKV was set to 1. It should be 0
	
* Tue May 28 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.5.2
	* Fix OGM muxing with AC3 audio
	
* Tue May 28 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.5.1
	* Use aften for AC3 audio encoding as MEncoder is currently broken. This bumps up the config
	  file version to 22
	  
* Tue May 21 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.5.0
	* Bugfix: add missing 384 kbps option for AC3 audio
	* Notify the user when we first create the config file
	* SAR is Sample Aspect Ratio, not Storage Aspect Ratio. Corrected this mistake
	
* Thu Apr 11 2013 Grozdan Nikolov <neutrino8@gmail.com> 9.4.9
	* Use ffmpeg's MPEG12 decoder instead of the libmpeg12 one
	
* Mon Oct 01 2012 Grozdan Nikolov <neutrino8@gmail.com> 9.4.8
	* Added bluray_compat=1 parameter to the Blu-ray and AVCHD presets
	* Use 'true' instead of 'false' where appropriate
	* Updated the man page
	
* Wed Sep 26 2012 Grozdan Nikolov <neutrino8@gmail.com> 9.4.7
	* Change bad default bitrate value in DTS audio encoding to 384kbps.
	
* Mon Apr 16 2012 Grozdan Nikolov <neutrino8@gmail.com> 9.4.6
	* Bugfix: FAAC encoding was using wrong language TID in mkvmerge. Should be 0 instead of 1 as
	  we no longer encapsulate AAC in MP4
	* Removed --no-chapters mkvmerge option for FAAC encoding. It's no longer needed as we no longer
	  store the AAC audio in MP4 container
	  
* Sat Apr 07 2012 Grozdan Nikolov <neutrino8@gmail.com> 9.4.5
	* Don't require FAAC to be compiled with MP4 container support (the -w option). Some distro's
	  do not compile FAAC with MP4 support so play it safe and assume FAAC isn't compiled with
	  MP4 support
	  
* Tue Feb 21 2012 Grozdan Nikolov <neutrino8@gmail.com> 9.4.4
	* Only 'sed' mbtree for multi-pass mode
	* Don't append "- chapter [id]" to output file when encoding only specific chapters
	
* Tue Jan 03 2012 Grozdan Nikolov <neutrino8@gmail.com> 9.4.3
	* Use -vc dummy in MPlayer in the audio code. Seems to work better on some files
	
* Sun Jan 01 2012 Grozdan Nikolov <neutrino8@gmail.com> 9.4.2
	* Use a separate variable in config file for setting the default CRF or QP value (DEFAULT_VID_CRFQP).
	  This bumps the config file version to 21
	* Renamed the DEFOUTPUT, DEFPATH and DEFBATCHDIR variables to DEFAULT_OUTPUT, DEFAULT_PATH and
	  DEFAULT_BATCHDIR
	* Be slightly more portable by using #!/usr/bin/env bash instead of #!/bin/bash shebang
	* Replaced some if conditionals in the -sc option by using 'test' directly
	* Added an option for passing additional MEncoder parameters. Useful for when the user wants to
	  use something like -mc 0 -noskip, for example
	* Added support for encoding to DTS audio through the dcaenc encoder which can be found at
	  http://aepatrakov.narod.ru/dcaenc/
	* Minor changes to the video_delogo_func() function. Use $sourcetype, $device, $vid and
	  $MPLAYEROPTS variables. Also use -nosound in MPlayer
	* Improved the mkvtags file. Escape special characters like &, <, > and " in the Title field
	
* Mon Oct 10 2011 Grozdan Nikolov <neutrino8@gmail.com> 9.4.1
	* Introduced two new variables in the config file, DEFAULT_VID_BITRATE and DEFAULT_AUD_CODEC.
	  The first one sets the default video bitrate or CRF/QP value while the second one can
	  be used to set a default audio codec. This change updates the config file to version 20
	* Fixed a typo in man page
	
* Sun Aug 20 2011 Grozdan Nikolov <neutrino8@gmail.com> 9.4.0
	* Disable mbtree in multipass mode to prevent segfaulting MEncoder due to differences in
	  frames amount in the passlog file. Disabling mbtree reduces quality but saves us a crash
	  in MEncoder
	* Notify the user that the script does not support AAC in AVI anymore. Also exit if user
	  has not selected any of the other supported containers
	  
* Mon Aug 08 2011 Grozdan Nikolov <neutrino8@gmail.com> 9.3.9
	* Bugfix: selecting the x264 internal denoiser does nothing due to missing $nr variable
	  in the MEncoder options
	  
* Sat Jul 23 2011 Grozdan Nikolov <neutrino8@gmail.com> 9.3.8
	* Update the mq, nq, hq, vhq, ehq, uhq and ihq presets. Increase subme by 1. For the ihq
	  preset, this means that it uses subme 11 now which requires latest x264 from git
	  
* Sun May 15 2011 Grozdan Nikolov <neutrino8@gmail.com> 9.3.7
	* Removed the ssim and psnr options from the presets. Should only be used for benchmarking
	
* Sun Apr 04 2011 Grozdan Nikolov <neutrino8@gmail.com> 9.3.6
	* Fixed the subtitles function which got broken when the get_selection_func()
	  function got introduced
	  
* Tue Mar 29 2011 Grozdan Nikolov <neutrino8@gmail.com> 9.3.5
	* Added support for setting the crop rounding value
	
* Wed Mar 09 2011 Grozdan Nikolov <neutrino8@gmail.com> 9.3.4
	* Fix option 4 and 5 of the video_deblock_func() function. Wrong vars used
	
* Mon Feb 21 2011 Grozdan Nikolov <neutrino8@gmail.com> 9.3.3
	* Fixed a bug in directory batch mode were wrong conditional was used to check
	  for the DEFOUTPUT variable
	* Display which file is currently being processed in batch mode
	* Check only for files while in batch mode
	* Do not exit if user types an incorrect answer to y/n questions. Instead, ask
	  the question again. Patch by Jan-Hendrik Peters and friends
	  
* Sat Jan 08 2011 Grozdan Nikolov <neutrino8@gmail.com> 9.3.2
	* Use -demuxer lavf when trying to get the video length for bitrate calculation
	  for a target file size. Should be more reliable on M2TS/TS files
	* Add support for the delogo filter. Patch by Haiko Michelfeit <haiko AT zsyndikat DOT org>
	  Config file version is bumped to 19
	* Updated copyright dates
	
* Sun Dec 05 2010 Grozdan Nikolov <neutrino8@gmail.com> 9.3.1
	* Fix for the custom preset (cp) option
	
* Fri Nov 26 2010 Grozdan Nikolov <neutrino8@gmail.com> 9.3.0
	* Remove double $HOME variable in the -scan option
	
* Fri Oct 29 2010 Grozdan Nikolov <neutrino8@gmail.com> 9.2.9
	* Fix typo in the backup_file_func(): exisiting -> existing
	* Workaround multichan FAAC encoding. FAAC somehow does not like multichan PCM from
	  MPlayer but it does if one treats it as raw using -P in FAAC. Nero/FLAC/Vorbis have
	  no issues, though. Go figure
	* Added support for setting subtitle codepage during hardcoding of external subs
	* Added support for the audio equalizer filter. This updates the config file version
	  to 18
	* Removed 'time' requirement
	
* Thu Sep 16 2010 Grozdan Nikolov <neutrino8@gmail.com> 9.2.8
	* Workaround mencoder stupidity. With recent versions of mencoder that have subs
	  enabled by default (who came up with that great idea?), in case the user selects
	  to dump a sub for importing into mkv/mp4, during multipass encoding the first sub
	  will always get hardcoded due to missing -nosub option in the 2nd and 3rd pass code.
	  This is only valid for multipass encodes so people using one pass modes (-1p, -qp or -crf)
	  are safe.
	  
* Wed Sep 15 2010 Grozdan Nikolov <neutrino8@gmail.com> 9.2.7
	* Small update to the -scan option. Just check if input file is there, regardless if
	  user provides the full path or not
	* Enable trellis in some presets that use CAVLC
	
* Mon Aug 23 2010 Grozdan Nikolov <neutrino8@gmail.com> 9.2.6
	* Fixed a syntax error in the iphq preset
	
* Sun Aug 22 2010 Grozdan Nikolov <neutrino8@gmail.com> 9.2.5
	* Update QuickTime & iPhone presets. Patch by gongloo
	
* Wed Jul 21 2010 Grozdan Nikolov <neutrino8@gmail.com> 9.2.4
	* Typo fix in the display_quality_preset_func(); verslow -> veryslow. As this is an
	  informative function, it does not affect the encoding configuration
	* Force -nosub option in case subtitles are skipped. This is to prevent auto-loading
	  of subs
	  
* Fri Jun 25 2010 Grozdan Nikolov <neutrino8@gmail.com> 9.2.3
	* Added support for x264's preset, tune and profile options. This adds two additional
	  optional args [-t (for tune) and -pf (for profile)] which can only be used with an
	  x264 preset, not with the built-in script presets. If used with those, these args
	  will be ignored.
	  Examples on how to use x264 presets (which is also explained in the -help option)
	  h264enc -crf -p slow
	  h264enc -crf -p slow -t film
	  h264enc -crf -p slow -pf main
	  h264enc -crf -p slow -t film -pf high
	  One can also switch the -t and -pf options, eg: h264enc -crf -p slow -pf high -t film
	* Updated the man page
	
* Sat May 15 2010 Grozdan Nikolov <neutrino8@gmail.com> 9.2.2
	* Small bugfix in the get_devices_func() function; script exits when user hits enter
	  to accept default device
	* Remove AVI menu entry as supported container when using FAAC for audio encoding
	
* Thu Apr 29 2010 Grozdan Nikolov <neutrino8@gmail.com> 9.2.1
	* Reworked a bit the audio channels decode/output function. This function also got
	  renamed from audio_channels_func() to audio_channels_decode_func()
	* Added support for the audio channels filter which can be used to add/remove/route channels
	  This updates the config file to version 17 and adds variable ALLOW_AUD_CHANNELS
	* Bugfix: audio filters were not inserted when doing 1-pass encodes
	
* Sat Apr 24 2010 Grozdan Nikolov <neutrino8@gmail.com> 9.2.0
	* Switch to using external FAAC encoder to work around an issue in mkvmerge where
	  it flags AAC audio taken from an AVI as being Main profile regardless if LC profile
	  is used for encoding or not. Problem noticed & reported by benpro. This updates the
	  config file to version 16 and requires FAAC to be installed.
	* Same small cleanups
	* Updated the man page
	
* Sun Mar 28 2010 Grozdan Nikolov <neutrino8@gmail.com> 9.1.9
	* Replaced sed with awk for checking available disk space. Should work better on
	  FreeBSD systems. Patch by ennob from doom9
	* Updated interlace options and presets to support the latest x264 from git. Note
	  that due to these changes, h264enc's presets are incompatible with older x264
	  versions so please upgrade to latest x264 from git!
	* Small update to the preset.cfg file
	
* Thu Mar 18 2010 Grozdan Nikolov <neutrino8@gmail.com> 9.1.8
	* Small bugfix: keyint and keyint_min weren't passed on to MEncoder when using some
	  presets

* Tue Mar 16 2010 Grozdan Nikolov <neutrino8@gmail.com> 9.1.7
	* Space escaped some previously missed variables
	* Use one variable in the presets (x264params) for all MEncoder x264 encoding options.
	  Reduces some code and simplifies things a bit
	* Updated the preset.cfg file to support the "one variable for all x264 encoder opts"
	  Note: those using custom preset files for encoding should read the preset.cfg file
	  in the doc dir and adapt their existing preset files to be compatible with the
	  changes. Previous older custom presets written by users will not work with this and
	  future versions of h264enc!
	  
* Thu Feb 18 2010 Grozdan Nikolov <neutrino8@gmail.com> 9.1.6
	* Added new veriable 'DEFOUTPUT' to the config file which can be used to set a default
	  output directory. This updates the config to version 15
	* Modified the set_output_filename_func() function to support the above variable.
		- If the DEFOUTPUT variable is empty, user can either provide just the output
		  name for the encode (in this case the script assumes $HOME as output dir), or
		  the full path and output name, which in this case the script will create the
		  output dir if it's not present or will do a write test when the dir is present
		  to see if it's writable by the user. If creation of output dir or the write test
		  fails, the script exits with a notice.
		- If the DEFOUTPUT variable contains a custom output dir, the script will test for
		  it and create it if it's not present. If creation fails, the script exits with a
		  notice. If the dir is present, the script will do a write test to see if the
		  custom dir is writable. If not, the script exits with a notice.
		- The DEFOUTPUT variable can be overwritten on the command line. This means that if
		  user has set a custom output dir in the DEFOUTPUT variable but provides a path when
		  asked on the command line, that path will be used instead of the one in the DEFOUTPUT
		  variable. The script then will either check and create the provided output dir on
		  the command line (if that dir is not present) or will do a write test if the dir
		  is present. Upon failure of creation or write test, the script exits with a notice.
		  If no path is provided on the command line but only the output name for the encode,
		  the script will use the one set in the DEFOUTPUT variable.
	
* Sat Jan 30 2010 Grozdan Nikolov <neutrino8@gmail.com> 9.1.5
	* Reduced duplication in the audio encode exporting code by moving it inside functions
	* Reduced duplication in the MKV/MP4/TS/OGM exporting code by moving it inside functions
	* Reduced duplication in the code that prints some information before encoding starts
	* Various minor code improvements
	
* Thu Jan 21 2010 Grozdan Nikolov <neutrino8@gmail.com> 9.1.4
	* Set default H.264 level to 'auto' and also accept integer numbers as levels in addition
	  to accepting fixed point ones, ie both 41 and 4.1 are now accepted as valid levels
	* Renamed the rmconf() function to rmtemp() 
	* Moved creation of temp dir, the interrupt_func() and rmtemp() functions at the beginning
	  of the script
	* Fixed a bug in the DVD part of the -scan option where lsdvd doesn't get a valid device
	  passed. Bug was introduced due to changes in the new get_devices_func() function
	* Reduced duplication in the mencoder_opts() function
	* Various small code improvements
	
* Tue Jan 19 2010 Grozdan Nikolov <neutrino8@gmail.com> 9.1.3
	* Made the TEMPDIR variable escape spaces in directory names
	* Small update to the mkvtags_func() function
	* Removed the -a52drc option for AC3 encoding
	* Added new x264 intra_refresh option to the script and the preset.cfg file
	* Added two new variables, DVD_DEVICE and CDROM_DEVICE, to the config file where user
	  can set a default block device to encode from. This updates the config file to version 14
	* Merged the get_dvd_devices_func() and get_vcd_devices_func() functions into a new one
	  called get_devices_func()
	  
* Wed Dec 23 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Fixed a severe bug that can cause in some cases severe data loss when using a 
	  custom temp directory. It manifests itself when using a 'top' directory as custom
	  temp directory such as a partition mount point or even the user's home directory.
	  In such cases, the top directory will be deleted upon script termination or when encoding
	  finishes, resulting in possible massive data loss due to rm -rf $TEMPDIR if TEMPDIR was
	  set to, for example, /home/username or points to a mount point or another directory that
	  may be important to the user.
	  From now on, always use a job<pid> directory inside the one set in the TEMPDIR variable
	  so it'll only delete the job<pid> directory and not its parent one, minimizing possibility
	  of a data loss disaster
	* Set nomixed_refs for the iphq/iphhq presets
	
* Thu Dec 10 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Disabled weightp for the AppleTV presets
	* Added new option sliced_threads present in latest x264 from git
	* Enabled b_pyramid for some presets that use mbtree as it now works with mbtree
	* Updated the preset.cfg file. Added sliced_threads option
	* Changed all video ALLOW_* variables in the config file to ALLOW_VID_*
	* When using dd to dump a DVD to an ISO, use options noerror,sync and a bs size of 2048
	* Added support for sending mails. This requires the 'mailx' program and a valid .mailrc
	  file in the home directory. Mail notification can be enabled in the config file of
	  h264enc which also offers an example of a gmail setting for .mailrc
	* Bumped config file version to 13
	* Updated copyright dates
	
* Mon Nov 09 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Implemented a simple telecine detector for NTSC DVDs. Currently it's a dumb solution
	  which can't distinguish between hard telecine and interlacing but it's enough to
	  detect soft telecine and mixed progressive/telecine content which is more common
	* Simplified the FPS detection code
	* Update to all presets: added new weightp x264 option. This requires latest x264
	  revision from git
	* Updated the preset.cfg file. Added weightp option
	* Small general code improvements and cosmetics
	
* Wed Nov 04 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Replaced a few if conditionals with case statements in the neroaac_audio_func() function
	* Sed a comma at the end of resolution detection in case we're dealing with TS files. The
	  default TS demuxer in MPlayer has a comma at the end of the resolution info which results
	  in errorneous behavior in the bc calculation
	* Simplified the resolution detection code
	* Some small cleanups
	
* Mon Oct 19 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Force stereo audio for Nero HE-AACv2 as it doesn't support anything else, thus
	  it results in failure if user tries to encode with more than two channels. This
	  updates the audio_channels_func() function and also adds a small new independent
	  one called neroaac_hev2_func() which only sets the channels to two if the channels
	  array variables are empty, as is the case when the user did not set the channels
	* Small improvements to the ABR/VBR default audio bitrates for the neroAacEnc encoder.
	  Base the default bitrates on the chosen AAC profile, i.e. if user chooses HE-AACv1,
	  default bitrate will be 55 kbps or in case of quality-based VBR encoding a value of
	  0.22. For LC-AAC and HE-AACv2, default bitrates and quality values will be 96 kbps
	  or 0.35 and 25 kbps or 0.11, respectively. Note that this assumes the input audio is
	  stereo so if it's anything else than that, it's up to the user to decide on bitrates
	  or quality values
	* Set default to a capital letter in questions where one needs to answer with y or n
	* Update to all presets: updated the b_pyramid option to use the new args none/strict/normal
	  present in latest x264 revision. Note that this requires both latest MPlayer from SVN
	  and latest x264 revision from git
	* Small b_pyramid update to the preset.cfg file
	
* Sat Oct 17 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Added new function video_subtitles_align_func() for subtitle alignment control.
	  Requested by blaz on doom9.org forum.
	* Added new x264 option 'constrained_intra' to the preset.cfg file.
	* Added detection of VFR content (1000 fps as reported by MPlayer).
	* Added X264_VERSION and MKVMERGE_VERSION entries to the mkvtags_func() function.
	* Simplified a bit the audio exporting code for the first track.
	
* Thu Sep 24 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* MP3 (MPEG1 Layer 3) only supports sample frequencies of 32, 44.1 and 48 kHz
	  so restrict to those only in the audio_resample_func() function
	* Set default for the pp7 deblocker to 3
	* Fixed example typo in the DVD chapters code
	* Insert the ilpack filter before the scaler to correctly align chroma channels
	  when preserving interlacing
	* Added AUDIO_CODEC_TRACK[1|2|3], AUDIO_LANGUAGE_TRACK[1|2|3] and H264ENC_PARAMETERS
	  entries to the mkvtags_func() function
	* Enabled adaptive transform for the AppleTV HQ preset (atvhq)
	* Improved checking the availability of block devices
	* Added option 'global_header' to the preset.cfg file
	
* Wed Sep 16 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Small bugfix: setting the H.264 level for the fghq preset wasn't possible
	* Small bugfix: the counter in set_output_filename_func() didn't increase itself
	* Added SOURCE, VIDEO_FILTERS, AUDIO_FILTERS_TRACK[1|2|3], ENCODER and X264_PARAMETERS
	  entries to the mkvtags_func() function
	  
* Mon Sep 14 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Use only lowercase words in all case statements that deal with the input source
	* Some small improvements to the exit info in the audio code
	* Placed the -passlogfile option inside the PASSLOG variable
	* Set psy_rd to 0.3 for the Anime presets
	* Allow setting the H.264 level for the PC presets to "auto" so libx264 will
	  decide itself which level to use based on options and resolution used
	* Added support for 2-pass Nero AAC audio encoding. Note that 2-pass is only
	  supported by ABR/CBR encoding and ensures that the output quality is constant
	  (like VBR) while also ensuring that a specified output bitrate is achieved
	  (like CBR). Requested by punlo on doom9.org
	  
* Sun Sep 06 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Fixed a typo in the man page, MEnocder -> MEncoder
	* Small improvement to how the MKV XML tagging file gets exported. Also improved
	  the XML formatting and added COMMENT string with text "Tagged by h264enc $version"
	* Added comment tag for MP4 and OGM with the same text as above
	* Small update to the video_deinterlace_func() function's menu
	* Add comment header with dates to batch files
	
* Fri Sep 04 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Added new option sync_lookahead available in latest x264 git and updated the
	  preset.cfg file
	* Added support for the noise video filter. This change updates the config file
	  to version 12. Also, encoding priority now defaults to a nice value of 10 in
	  the config file
	* Moved out the code which checks and backups/renames a file if it has the same
	  name as the output provided by the user to a separate function called
	  backup_file_func() and also improved it so that if there's already an existing
	  backup file, the new one will increase its count number by one thus there's no
	  more overwriting being done anymore. The same thing applies to existing chapter
	  files and DVD subs
	* Added support for Year and Genre metadata tagging for the MKV/MP4/OGM containers.
	  For MKV, the genre and year is set globally using an automatically generated XML
	  file. MP4 uses the iTunes tagging and OGM the comment space
	* Updated the man page
	
* Tue Sep 01 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Simplified the audio_channels_func() function a bit
	* Merged the QP and CRF settings
	* Increased rc_lookahead a bit for the ehq, uhq and ihq presets
	* Improved detection of DVD audio language codes. We now specifically grep for the
	  language word and then print the 2nd positional which gives us the language code.
	  It works more reliably if the DVD does not report its language code for the audio track(s)
	  so if this is the case, we fall back to undefined language. The previous code fails in
	  such cases due to the printing of the 8th positional which will print the "aid:" part when
	  there's no language code after the "language:" word, resulting in MKV/MP4 muxing failures.
	  Reported by WalterK from doom9.org
	* Moved the code that deals with DVD subs/cover files/metadata info/chapters and external
	  subs for the MP4 container before its audio code
	* Added slicing to the Blu-ray and AVCHD presets. It increases compliancy with the Blu-ray
	  specs. Slicing is only available in the latest x264 from git so please upgrade if you
	  intend to use the Blu-ray/AVCHD presets
	* Added new options 'slices', 'slice_max_size' and 'slice_max_mbs' to the preset.cfg file
	* Fixed chapters import for the OGM container. Missing '@' before the chapters input file
	  results in the file not being imported
	* Added support for audio language metadata info for the OGM container
	* Small improvements to how chapters information is added to the output file name
	
* Sat Aug 15 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Renamed presets f9 and f9hq to fl and flhq
	* Added new preset 'fghq' specifically optimized for preserving film grain
	* Removed duplicate videofilters variable. This removes the check for the tfields filter
	  as now deinterlacing will always be done after cropping (which also speeds up things a bit)
	  so the crop filter will never complain about crop area being outside of the original if
	  tfields is used. It also reduces filters maintenance a bit
	* Turn soft-clipping on in the volume audio filter
	* Use aq_mode=1 for presets that have mbtree enabled as it usually does better on fades than
	  aq_mode=2
	* Updated the man page
	
* Tue Aug 11 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Reduced the amount of if conditional iterations for setting the scaler interlace variable
	* Print full path of the output file(s) at the end of encoding
	* 10L: forgot to enable MB tree for the anihq preset
	* Replaced variable CONFIGDIR with TEMPDIR. This change updates the config file to version 11
	* Fixed some spacings issues by moving around some echo's
	* Simplified the sample encoding code. Reduced some code duplication
	* Upped psy_rd from 0.6 to 0.8
	
* Fri Aug 07 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Added support for the audio panning filter. This change also updates the config file
	  to version 10
	* Simplifications to the audio_filters_func() and audio_filters_var_func() functions
	* Moved the audio filters functions after the audio codec ones
	* Fixed a bug in the audio_channels_func() function for the AAC codec. If user just
	  hits return to accept the default AAC codec, the channels function was not called
	  due to missing "" in the first case statement of that function
	* Enabled MB tree (macroblock tree ratecontrol) for the high quality presets and disabled
	  b_pyramid for presets that have mbtree enabled as it currently doesn't support it. Note that
	  mbtree produces a large passlog file when ran in 2-pass mode but can increase quality anywhere
	  between 2-70%, depending on the content. mbtree is only available in latest x264 git so
	  please upgrade
	* Added new options mbtree, rc_lookahead and nopsy to the preset.cfg file
	
* Sat Aug 01 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Added new option -mfr which calculates the maximum allowed frame references within DPB
	  (Decoded Picture Buffer) limits for different H.264 levels and resolutions
	* Call the track_echo_func() function inside the select_audio_codec_func() one. Removes
	  pointless duplication
	* Don't call mplayer twice in the 2nd/3rd audio track code just to get the audio codec.
	  Also removed a pointless case statement
	* Allow users to set the H.264 level when using the standard PC presets
	* Fixed a few typos in the preset.cfg file
	* Updated the man page
	
* Thu Jul 30 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Increased subq to 10 (QP-RD) for the IHQ preset. Requires latest x264 from git. Also
	  lowered frameref from 16 to 8 and bframes from 10 to 7
	* Add example on how to encode only specific DVD chapters. Some people keep bugging me
	  about this while it's actually very simple
	  
* Fri Jul 24 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Switched to the new Auto-variance AQ (aq_mode=2) for all presets. This requires latest x264
	  revision from git so please upgrade!
	* Decreased frame references for all iPod presets to 1 and increased subq to 8 for the HQ iPod
	  presets
	* Minor improvments to the set_output_filename_func() function
	* Merged the audio code of the portable device presets. Moderately reduces code duplication in
	  the audio functions calling code
	* Added two new presets (ag1 and ag1hq) for Android G1 devices. This brings the total presets
	  count to 60
	* Added support for the new gradfun debanding video filter. Although mostly recommended for playback
	  due to the fact that encoding tends to bring back banding, it can be useful to deband input
	  sources which show pretty bad and very noticable banding effects before passing the content
	  to the encoder. The gradfun filter is only available in MPlayer SVN. This also adds a new
	  variable ALLOW_DEBAND to the config file where one can enable or disable this filter
	* Added a small while loop to the video_crop_func() function which will keep asking the user for
	  new crop values until he's satisfied with them. Patch by elektronaut from Doom9.org
	* Added a new variable PRIORITY to the config file which can be used to set a global priority
	  nice value for the encoding process. The values one can use are between (and including)
	  -20 and 19. However, if the script detects that the variable has a negative nice value
	  set and the script is being executed with regular user privileges, it will print a notice
	  and exit. This change updates the config file to version 9
	* Updated the man page
	
* Wed Jul 08 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Added detection for E-AC3 audio for stream copy and updated the MKV/TS muxing code to support it
	* Added new option -spr which calculates the Storage and Pixel Aspect Ratios (SAR/PAR) for various
	  resolutions
	* Display the amount of chapters each DVD title has when scanning for titles
	* Display total pixels, SAR and PAR when scanning a file/vcd with the -scan option
	* Added --no-chapters mkvmerge option for audio files encoded by neroAacEnc so that chapters
	  won't be copied over to the MKVs from these files
	* Small update to the install script
	* Updated the man page. Fix some small cosmetic issues, patch by Alessio Treglia
	
* Wed Jul 01 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Fallback to undefined audio language in the AUDLANG[$i] variables if we detect unknown language
	  from MPlayer's output
	* Added support for bitrate-based ABR Vorbis encoding in addition to quality-based VBR. ABR mode
	  in Vorbis resembles quality-based VBR except the encoder averages a given nominal bitrate
	* Updated the Vorbis part of the video bitrate calculation code
	* Added new function ratio_and_pixels_func() which calculates and displays the Storage Aspect Ratio (SAR),
	  Pixel Aspect Ratio (PAR) and total pixels from resolution
	* Bugfix for track 1 in the internal audio encoding code. If using aacplusenc to encode audio, the case
	  statement had a wrong selection value (aac++ instead of aac+) resulting in displaying a failed message
	  and forcing an exit even though the encoding may have succeeded
	* Simplifications to the internal audio encoding code which reduce code duplication
	* Small fixes to the video bitrate calculation code
	* Small tuning to the Blu-ray/AVCHD presets
	* Small cleanups
	
* Fri Jun 26 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Set default audio codec for the Blu-ray/AVCHD presets to AC3
	* Bugfix to the OGM muxing code. Second/third track were ignored when one selects AC3 audio
	* Added keyint, keyint_min, nr and interlaced variables to the custom preset skeleton file 'preset.cfg'
	* Moved the AACTYPE variable to the neroaac_audio_func() function and updated the specific parts
	  that use it in the MKV/MP4 muxing code
	* Do not automatically detect audio sample rate in directory batch encoding mode. Only do it
	  for single file/dvd/vcd encodings as in batch mode, detection will only print the sample rate of
	  the first file but not the other files in the directory so this can mislead the user in thinking
	  that all files in the directory have the sample rate reported by the script. It is possible to
	  implement sample rate detection for all files but since we don't know how many files are in
	  the directory, I do not want the user to see a full screen with sample rate info of each file if
	  he deals with a directory with a few hundreds or more files in it
	* Disallow autocropping, if enabled in the config file, for directory batch encodings
	* Small reordering to the MP4 muxing code
	* Small update to the install script
	* Updated the man page
	
* Wed Jun 24 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Removed audio filters for the 1st pass in 2-pass encoding and for the 1st & 2nd pass of
	  a 3-pass encoding. They are useless here and it's something I've overlooked for a long
	  time. Thanks to Mat Kanner for noticing and reporting
	* Some small changes to the way we pass FPS to MP4Box
	* Added support for MP4 hinting for RTP/RTSP sessions
	* Simplifications to the external subs importing code. Also fixed a bug in the MP4 subs
	  importing code; missing -add option in the MP4SUBS variable will make MP4Box fail
	* Merged the MKV tagging code with the muxing one
	* Added support for detection of WMA audio for stream copy
	* Added support for per track audio codecs for DVD encodings. The user can now select
	  if he wishes for each track a different audio codec. Mixing audio stream copy with
	  compression codecs is also possible
	* Updated all relevant audio functions to support per track audio codecs
	* Updated the bitrate calculation code to support per track audio codecs
	* Updated the container muxing code to support the above audio changes
	
* Mon Jun 22 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Small improvement to the MKV/MP4 tagging code: support audio tagging of single file
	  encodes with audio stream copy
	* Use array variables ${SUBFILE[2] and ${SUBFILE[3] instead of ${OUTPUT%.*}_sub2
	  and ${OUTPUT%.*}_sub3 when dumping the second/third DVD subtitles
	* Simplified the MKV cover art importing code
	* Small improvements to video bitrate calculation with audio stream copy
	* Use only one named pipe for all tracks when encoding to neroAAC/AAC+/Vorbis/FLAC
	* Major audio code restructuring and partial rewrite. Converted virtually all audio
	  code variables to array variables. This allows for easy extensibility and much less
	  code duplication. It's very easy now to add as much audio tracks as one may want to the
	  code with very little changes/updates needed to the containers code. Also the current
	  changes may allow very easily to support different audio codecs per track in the future
	* Added support for a third DVD audio track
	* Updated the video bitrate calculation for target size to support the above audio changes
	* Converted most of the variables in the video_subtitles_func() function to arrays. This
	  moderately reduces some code duplication
	* Updated the container muxing/tagging code to support the above audio changes
	* Use external flac encoder to encode to FLAC audio as doing it through mencoder is terribly
	  broken. This updates the config file to version 8 and adds the 'flac' encoder as dependency
	* Set the default resampling filter to lavcresample as the other one gives problems when
	  encoding to FLAC audio and resampling
	  
* Wed Jun 19 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Simplifications to the MKV tagging code which reduces some code duplication
	* Bugfix: FAAC acodec2 variable has wrong mpeg value. Must be mpeg=4 instead of mpeg4.
	  This results in failure in encoding of the second audio track when one selects
	  FAAC as encoder
	* Bugfix: FLAC audio was ignored for the second track due to missing value in the selection
	  of the case statement
	* Added support for tagging of MKV files when doing a directory batch encoding
	* Replaced the IMPSUB1, IMPSUB2 and IMPSUB3 variables, used to import subs when input type
	  is file/directory/vcd, by array variables EXTSUB[1], EXTSUB[2] and EXTSUB[3]. This allows
	  for less code duplication as these array variables are shared by all input types (including DVD)
	  and thus we only need to do a small loop and add their values if not empty to the
	  MKVSUBS, MP4SUBS and OGMSUBS variables
	* Use as temp directory $HOME/.h264enc/job<PID>
	* Added new function audio_stream_copy_func() which will print a warning that audio stream copy
	  in directory batch encoding mode is not recommended unless the user is certain that the files
	  have a supported audio codec by the MKV/MP4/OGM/TS containers
	* Group audio filters under a submenu similar to how the video filters are grouped
	* Some small cleanups
	
* Wed Jun 17 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Added support for per track audio bitrate for DVD encodings
	* Added support for per track audio normalization and volume adjustments for DVD encodings.
	  Updated functions audio_volnorm_func() and audio_volume_func()
	* Added support for per track audio resampling for DVD encodings. Updated functions
	  audio_resample_filters_func() and audio_resample_func()
	* Updated the video bitrate calculation code to support the above audio changes
	* Bugfix for the qt/bd/avchd presets: audio filters were not called for these presets
	* Added support for per track AAC profile settings (LC/HE/HEv2) when using the
	  neroAacEnc audio encoder
	* Small modifications to the MKV/MP4 tagging and muxing code to support the
	  per track neroAacEnc AAC profiles. This also includes optimizations to the way
	  the tagging code handles different AAC profiles. If LC profile is chosen, audio will
	  be tagged as LC-AAC (along with channels info). For HE and HEv2, audio will be tagged
	  as HE-AACv1 and HE-AACv2 (along with channels info) respectively
	* Moved the MKV tagging code inside the MKV muxing code
	* Converted the EXTSUB1, EXTSUB2 and EXTSUB3 variables, used to import external DVD subs,
	  to arrays so we can easily check different files for their file extensions
	* Only allow SRT subs as import into OGM. If another subs format is provided, the
	  subs will be skipped. For MP4, do not allow ASS/SSA subs since it's not supported yet
	  by MP4Box. For MKV, do not allow SUP and TTXT subs
	  
* Mon Jun 15 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Update to the video_subtitles_func() function: for DVD encodings, added support
	  for importing up to three external subtitles into MKV/MP4/OGM. Also added
	  support for hardcoding an external subtitle into the movie
	* Updated the MKV/MP4/OGM muxing code to support imports of external subtitles
	* Increased Psy RD from 0.5 to 0.6 for some presets
	* If dumping of the second and/or third DVD subtitle fails and user has selected to
	  import the subs into MKV/MP4, force an exit since container conversion will fail as
	  the muxing programs will complain about the missing subs. If no container conversion
	  is chosen or user has chosen not to import the subs and dumping of subs fails, just
	  continue since there's nothing critical in this case
	* Use mplayer -really-quiet option instead of redirection to /dev/null when dumping
	  audio to a named pipe for neroAAC/Vorbis/AAC+ encoding
	* Some small updates to the man page
	* Updated the AUTHORS file
	
* Fri Jun 12 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Replaced the --noaudio mkvmerge option with -A due to recent options changes
	  in mkvmerge version 2.9.5. -A also works for older versions so nothing breaks here
	* Removed the check_outfile_func() function as its code has been added to the
	  set_output_filename_func() function, which also has been improved
	* Added support for FLAC audio in MKV
	* Removed some code duplication in the MKV metadata tagging code
	
* Tue Jun 09 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Added support for adding jpeg/png cover art files to MKV/MP4
	* Added audio language meta-info for MP4 and TS files
	* Improved audio language meta-info for MKV files. This also adds metadata
	  info for the second audio track
	* Fixed a small bug: the --aac-is-sbr mkvmerge parameter should be set to 0:1
	  for the second audio track when using aacplusenc as encoder
	  
* Mon Jun 08 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Add iTunes video title name to MP4 files
	
* Sun May 24 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Use the same name for the log file as the output file name
	* Force using the libmpeg2 decoder when encoding DVDs/VCDs (works slightly better in specific
	  cases compared to ffmpeg2)
	* Added support for IVTC 59.940 -> 23.976 fps
	* Some small code cosmetics

* Tue May 12 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Added deinterlace combinations of Yadif + linear blend, linear interpolation, cubic
	  interpolation, median deint, ffmpeg deint and lowpass 5
	* Cosmetics to the help menu
	* Added global audio function audio_filters_func() for calling the resample, volume
	  normalizing and volume filters
	* Added 16 new variables to the config file for enabling/disabling of specific audio/video
	  filters and containers: ALLOW_FPS_CONVERSION, ALLOW_SCALER_TUNING, ALLOW_DSIZE,
	  ALLOW_EXPAND, ALLOW_COLORSPACE, ALLOW_ASPECT, ALLOW_AUD_RESAMPLE, ALLOW_AUD_NORMALIZE,
	  ALLOW_AUD_VOLUME, ALLOW_MKV_MUXING, ALLOW_MP4_MUXING, ALLOW_TS_MUXING, ALLOW_OGM_MUXING,
	  ALLOW_SAMPLE_ENCODING, ALLOW_SCAN_MULTIPLE_VIDSTREAMS and ALLOW_SCAN_MULTIPLE_AUDSTREAMS,
	  the last two are only effective on file and directory batch encodings
	* Updated the man page

* Thu May 7 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Automatically add the shebang line to batch files and make them executable
	* Added new variable ALLOW_AUTOCROP to the config file which allows the user to enable or
	  disable automatic cropping
	* Added MP3 presets and updated target file size code to support them (requested by Rogério Brito)
	* Some minor adjustments to the hq, vhq, ehq, uhq and ihq presets; decrease b-frames by one

* Wed Apr 29 2009 Grozdan Nikolov <neutrino8@gmail.com>
  - Small bugfix: video filters variables in the config file were not respected when one
    chooses to encode VCDs. 
  - Add video title meta-data for MKV and OGM when doing directory batch encodings

* Tue Apr 28 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Optimize some variables by replacing piping to sed with VARIABLE1="${VARIABLE2%.*}.ext"
	* Move out the built-in -loop 1 mplayer option to the config file's MPLAYEROPTS variable
	* Add support for enabling/disabling specific pre/postprocessing filters in the config file.
	  This adds 7 new variables to the config file where the user can either enable to ask
	  questions about a specific filter or disable a specific variable, thus skipping
	  questions about the filter
	* Moved the video filters code to a new function called video_filters_func(). This also
	  reduces a bit of code duplication
	* Add a new option -e which allows the user to edit the config file directly from within the
	  terminal. This adds a new variable EDITOR to the config file where the user can set his
	  preferred text editor (defaults to nano)
	* Silence possible dvdxchap warnings
	* Updated the man page

* Thu Apr 26 2009 Grozdan Nikolov <neutrino8@gmail.com>
	* Bugfix: missing 's' in the sed expression of the MP4OUT variable. This results in
	  missing output file and will fail when one tries to remux to mp4