Projects
Multimedia
ffhevc
ffhevc.changes
Sign Up
Log In
Username
Password
Overview
Repositories
Revisions
Requests
Users
Attributes
Meta
File ffhevc.changes of Package ffhevc (Revision 287)
Currently displaying revision
287
,
Show latest
------------------------------------------------------------------- Wed May 13 09:03:00 UTC 2026 - microchip8@proton.me - Update to version 4.7.1 * Add support for E-AC-3 7.1 encoding. Requires latest FFmpeg from git * Set lookahead-slices to 2 for the built-in script preset * Revert to using dafault of 0 for cbqpoffs/crqpoffs for SDR content ------------------------------------------------------------------- Mon Mar 02 15:30:00 UTC 2026 - microchip8@proton.me - Update to version 4.7.0 * Remove dependency on MPlayer and use ffplay instead for crop previews * Updated the man page ------------------------------------------------------------------- Mon Feb 23 05:15:00 UTC 2026 - microchip8@proton.me - Update to version 4.6.19 * Minor update to the built-in script preset * Set Spline64 as default zimg scaler ------------------------------------------------------------------- Thu Jan 22 11:15:00 UTC 2026 - microchip8@proton.me - Update to version 4.6.18 * Use more accurate crop detection by using rounding of 4 instead of the default 16 ------------------------------------------------------------------- Sat Jan 10 09:45:00 UTC 2026 - microchip8@proton.me - Update to version 4.6.17 * Dolby Vision encoding requires vbv maxrate/bufsize so check if it's set or not. If not, print notice and exit * Fix VBV maxrate/bufsize code * Cosmetics ------------------------------------------------------------------- Fri Jan 09 11:35:00 UTC 2026 - microchip8@proton.me - Update to version 4.6.16 * Also turn on Dolby Vision in ffmpeg, not just in x265 * Optimize lanczos3/4 zimg scaler code selection ------------------------------------------------------------------- Sat Dec 20 13:27:00 UTC 2025 - microchip8@proton.me - Update to version 4.6.15 * Bugfix in the zscale scale filter for Lanczos3/4 ------------------------------------------------------------------- Sat Dec 13 12:40:00 UTC 2025 - microchip8@proton.me - Update to version 4.6.14 * Detect type of content (HDR/SDR) and base default CRF value on it ------------------------------------------------------------------- Fri Dec 12 07:55:00 UTC 2025 - microchip8@proton.me - Update to version 4.6.13 * Fix: only ask to lower the CRF value when doing HDR encodings ------------------------------------------------------------------- Tue Nov 25 08:55:00 UTC 2025 - microchip8@proton.me - Update to version 4.6.12 * Add support for Spline64 zimg zscale filter. Requires latest FFmpeg from git ------------------------------------------------------------------- Fri Nov 21 20:53:00 UTC 2025 - microchip8@proton.me - Update to version 4.6.11 * Fine-tune the built-in script preset * Lower default CRF value from 23 to 22 * Add option to change already set CRF value when encoding in HDR ------------------------------------------------------------------- Sun Nov 16 15:52:00 UTC 2025 - microchip8@proton.me - Update to version 4.6.10 * Increase QP adaptation range for the built-in script preset to 1.3 * Reworked a bit the HDR code ------------------------------------------------------------------- Sat Nov 15 06:48:00 UTC 2025 - microchip8@proton.me - Update to version 4.6.9 * For SDR encodings, use blue/red chroma qp offsets of -2 * For HDR encodings, lower blue/red chroma qp offsets to -4 * Some minor optimizations in the HDR code * Fix comparison for cb/crqpoffs for SDR encodings ------------------------------------------------------------------- Fri Nov 14 08:25:00 UTC 2025 - microchip8@proton.me - Update to version 4.6.8 * Fixed a bug in the options parsing that resulted in max-cll and dhdr10 not being added for HDR encodings * Minor code restructuring in the HDR code ------------------------------------------------------------------- Thu Nov 13 19:10:00 UTC 2025 - microchip8@proton.me - Update to version 4.6.7 * Lower qg-size to 16 for HDR encodings * Enable hdr10-opt by default for HDR encodings * Set default in-script FFmpeg scaler to natural bicubic spline and the default zimg scaler to spline36 * Minor improvements to the scaling code * Updated the README and man page files ------------------------------------------------------------------- Wed Nov 12 22:30:00 UTC 2025 - microchip8@proton.me - Update to version 4.6.6 * Lower subme from 7 to 5 in the script preset and increase aq-strength to 1.1 * Support setting a default zimg scaler in the config file ------------------------------------------------------------------- Sun Nov 09 11:43:00 UTC 2025 - microchip8@proton.me - Update to version 4.6.5 * Set max-cll to 0,0 in case no values were detected * Warn user that HDR10 will be disabled in case of unavailable master-display values ------------------------------------------------------------------- Sat Nov 01 07:07:00 UTC 2025 - microchip8@proton.me - Update to version 4.6.4 * Reworked the internal script preset * Lowered the Cb/Cr qp offsets to -2 for HDR encodings * Increased the Cb/Cr qp offsets to 1 for SDR encodings ------------------------------------------------------------------- Fri Oct 31 08:45:00 UTC 2025 - microchip8@proton.me - Update to version 4.6.3 * Set qp-adaptation-range to 2.0 for the script preset * Enable asymmetric partitions for the script preset * Set rskip2 threshold to 1 for the script preset ------------------------------------------------------------------- Mon Sep 08 14:16:00 UTC 2025 - microchip8@proton.me - Fix: chroma qp offsets for HDR10 weren't added when running in batch mode - Small fine-tune to the script preset ------------------------------------------------------------------- Sat Jun 28 08:50:00 UTC 2025 - microchip8@proton.me - Update to version 4.6.1 * Lower B-frames from 8 to 6 in the script preset * Disable tskip in the script preset * Add negative Chroma QP offsets for HDR content ------------------------------------------------------------------- Wed Jun 04 12:05:00 UTC 2025 - microchip8@proton.me - Update to version 4.6.0 * Delete side data when doing tone mapping to SDR * Updated the AUTHORS, README and man page files ------------------------------------------------------------------- Sun Feb 02 13:17:00 UTC 2025 - neutrino8@gmail.com - Update to version 4.5.19 * Turn on HME for the built-in script preset * Increased default noise value from 4 to 5 * Updated the README file ------------------------------------------------------------------- Thu Jan 02 10:04:00 UTC 2025 - neutrino8@gmail.com - Update to version 4.5.18 * Fixed a bug in the cropping code for batch encoding ------------------------------------------------------------------- Tue Dec 31 11:36:00 UTC 2024 - neutrino8@gmail.com - Update to version 4.5.17 * Don't error out during runtime if a HDR10 value is not set/available * Updated the built-in script preset ------------------------------------------------------------------- Mon Dec 09 15:23:00 UTC 2024 - neutrino8@gmail.com - Update to version 4.5.16 * Moved cropping code into its own function and display informative crop values message when running in batch mode * Add hdr10-opt=1 option when in batch mode and using HDR10 * Set default audio volume filter value to 2dB ------------------------------------------------------------------- Tue Dec 03 15:38:00 UTC 2024 - neutrino8@gmail.com - Update to version 4.5.15 * Only ask once for HDR10 side data in batch mode * Use AQ Mode 1 (Uniform) for the built-in script preset. Should reduce a bit pulsing of noise in noisy videos ------------------------------------------------------------------- Mon Nov 25 21:29:00 UTC 2024 - neutrino8@gmail.com - Update to version 4.5.14 * Bugfix for missing video filters ------------------------------------------------------------------- Mon Nov 25 15:43:00 UTC 2024 - neutrino8@gmail.com - Update to version 4.5.13 * Support both Lanczos3 and Lanczos4 in the zscale filter * Enable grain-optimized ratecontrol in case tune profile 'grain' is used. Also add an option to enable/disable it during runtime * Updated the man page ------------------------------------------------------------------- Sat Nov 23 16:43:00 UTC 2024 - neutrino8@gmail.com - Update to version 4.5.12 * Tweaks to the built-in script preset * Made the built-in script preset selectable with the -p option * Support tune profiles with custom presets (-c option) ------------------------------------------------------------------- Thu Nov 21 15:25:00 UTC 2024 - neutrino8@gmail.com - Update to version 4.5.11 * Added support for disabling automatic metadata such as video title, audio codec names, etc through the config file ------------------------------------------------------------------- Mon Nov 18 13:25:00 UTC 2024 - neutrino8@gmail.com - Update to version 4.5.10 * Fixed a bug in the audio metadata when copying the Dolby core audio that added "+ Atmos" to the metadata * One-line micro-optimization in the Dolby metadata code ------------------------------------------------------------------- Mon Nov 11 11:45:00 UTC 2024 - neutrino8@gmail.com - Update to version 4.5.9 * Do colorspace conversion before scaling * Moved chroma location code after color primaries code and before the IDR/keyframes code ------------------------------------------------------------------- Fri Nov 08 10:17:00 UTC 2024 - neutrino8@gmail.com - Update to version 4.5.8 * Support copying the DTS core-only from DTS 96/24 and DTS:X IMAX tracks * Updated the AAC profile detection for audio copy * Set default value for Chroma Location to 2 if HDR encoding is enabled ------------------------------------------------------------------- Wed Nov 06 10:28:00 UTC 2024 - neutrino8@gmail.com - Update to version 4.5.7 * Replaced the detelecine filter with a combination of the fieldmatch, bwdif and decimate filters * Small changes to the HDR10 code and tonemap desat default value * Renamed a few variables for DoVi ------------------------------------------------------------------- Sun Nov 03 13:46:00 UTC 2024 - neutrino8@gmail.com - Update to version 4.5.6 * Support copying full DTS-X audio or only the DTS core ------------------------------------------------------------------- Sat Nov 02 09:27:00 UTC 2024 - neutrino8@gmail.com - Update to version 4.5.5 * Support copying full DTS-HD HRA audio or just the DTS Core in it * Support copying full Dolby Atmos audio or just the AC-3/TrueHD Core in it ------------------------------------------------------------------- Fri Nov 01 14:47:00 UTC 2024 - neutrino8@gmail.com - Update to version 4.5.4 * Added support for copying only the DTS Core audio or the full DTS-HD MA audio track ------------------------------------------------------------------- Wed Oct 30 21:04:00 UTC 2024 - neutrino8@gmail.com - Update to version 4.5.3 * Reduced duplication in the final audio params code variable * Use kHz instead of Hz for audio sample rate metadata * Slightly increased default value of the noise filter * Updated the AUTHORS file (email address) ------------------------------------------------------------------- Mon Oct 28 16:25:00 UTC 2024 - neutrino8@gmail.com - Update to version 4.5.2 * Updated the audio copy code to detect Dolby Atmos and use the correct name metadata * Renamed a few variables ------------------------------------------------------------------- Sat Sep 21 09:00:00 UTC 2024 - neutrino8@opensuse.org - Update to version 4.5.1 * Improved the HDR10 code * Renamed a few variables ------------------------------------------------------------------- Wed Feb 28 22:20:00 UTC 2024 - neutrino8@opensuse.org - Update to version 4.5.0 * Initial support for zimg (z lib) scalers ------------------------------------------------------------------- Sun Feb 04 16:40:00 UTC 2024 - neutrino8@opensuse.org - Update to version 4.4.17 * Don't exit but warn about MP4Box/Mplayer missing from the user's system ------------------------------------------------------------------- Thu Dec 14 17:36:00 UTC 2023 - neutrino8@opensuse.org - Update to version 4.4.16 * Improved compatibility with the BSDs ------------------------------------------------------------------- Mon Nov 06 18:00:00 UTC 2023 - neutrino8@opensuse.org - Update to version 4.4.15 * Set the setpts + atempo option as default for FPS conversion * Correct 5.0 and 5.1 channels option for TrueHD encoding. Should be 5.0(side) and 5.1(side) ------------------------------------------------------------------- Fri Oct 27 11:50:00 UTC 2023 - neutrino8@opensuse.org - Update to version 4.4.14 * Set side/wide audio channels as default * Support the newly added channels for TrueHD audio ------------------------------------------------------------------- Sun Sep 10 16:13:00 UTC 2023 - neutrino8@opensuse.org - Update to version 4.4.13 * Bugfix in the video_noise_func() function ------------------------------------------------------------------- Mon Aug 21 12:05:00 UTC 2023 - neutrino8@opensuse.org - Update to version 4.4.12 * Update to the default encoding options * By default, force signaling of HDR10 in case max-cll is unknown or 0,0 * Various small improvements ------------------------------------------------------------------- Sat Aug 19 18:18:00 UTC 2023 - neutrino8@opensuse.org - Update to version 4.4.11 * Improved FPS detection code ------------------------------------------------------------------- Thu Aug 17 03:35:00 UTC 2023 - neutrino8@opensuse.org - Update to version 4.4.10 * Fix crop detection for HDR content * Set Lanczos as default scaler option ------------------------------------------------------------------- Wed Aug 16 06:11:00 UTC 2023 - neutrino8@opensuse.org - Update to version 4.4.9 * Ask for the Lanczos scaler width (alpha) * Only ask to force HDR10 signaling in case Max CLL is not set or user has provided 0,0 as value ------------------------------------------------------------------- Sun May 07 07:04:00 UTC 2023 - neutrino8@opensuse.org - Update to version 4.4.8 * Update to the default encoding options * Increased default CRF value from 21 to 23 ------------------------------------------------------------------- Mon Jan 23 10:43:00 UTC 2023 - neutrino8@opensuse.org - Update to version 4.4.7 * Support more deinterlacing filters ------------------------------------------------------------------- Fri Jul 29 18:31:00 UTC 2022 - neutrino8@opensuse.org - Update to version 4.4.6 * Fine tuning to the default encoding options * Tweaks to the HDR10 code ------------------------------------------------------------------- Sun Apr 25 16:50:00 UTC 2021 - neutrino8@opensuse.org - Update to version 4.4.5 * Remove +frag_keyframe for the MP4 container. Doesn't make sense when used with +fasstart. * Cosmetics: use HDR10 word when asking HDR questions ------------------------------------------------------------------- Sat Apr 03 19:33:00 UTC 2021 - neutrino8@opensuse.org - Update to version 4.4.4 * Fixed a small bug where the -colorspace option was not added for BT2020 content in case SMPTE2084/HLG was chosen as transfer ------------------------------------------------------------------- Sat Mar 27 16:18:00 UTC 2021 - neutrino8@opensuse.org - Update to version 4.4.3 * Remove hrd options for HDR encodes. They're not really needed * Luma/Chroma Offset should be Optimization instead ------------------------------------------------------------------- Sun Mar 21 15:10:00 UTC 2021 - neutrino8@opensuse.org - Update to version 4.4.2 * Fix a long-standing bug in the HDR code where the $hdr variable was used twice, once to check if HDR is selected and once to force signaling of HDR in case max-cll is 0,0. This resulted in an "y" being added after the specified max-cll value * Renamed hdr_opt to hdr10_opt ------------------------------------------------------------------- Tue Feb 16 18:50:00 UTC 2021 - neutrino8@opensuse.org - Update to version 4.4.1 * Fix "too many arguments" error in the HEVC Level code ------------------------------------------------------------------- Mon Feb 08 18:35:00 UTC 2021 - neutrino8@opensuse.org - Update to version 4.4.0 * Support setting the Maximum Decoder Level ------------------------------------------------------------------- Tue Feb 02 14:05:00 UTC 2021 - neutrino8@opensuse.org - Update to version 4.3.9 * Replace the yadif deinterlacer with bwdif. It's faster and provides higher quality ------------------------------------------------------------------- Fri Jan 22 07:57:00 UTC 2021 - neutrino8@opensuse.org - Update to version 4.3.8 * Remove "a" from the -ac audio option * Fix possible negative index in the audio option ------------------------------------------------------------------- Mon Dec 28 01:45:00 UTC 2020 - neutrino8@opensuse.org - Update to version 4.3.7 * Fix a bug in the $vidtrack variable ------------------------------------------------------------------- Sun Dec 27 18:25:00 UTC 2020 - neutrino8@opensuse.org - Update to version 4.3.6 * Fixed a long standing bug where audio mapping values were incorrect for audio metadata resulting in incomplete or wrong values ------------------------------------------------------------------- Tue Dec 15 18:30:00 UTC 2020 - neutrino8@opensuse.org - Update to version 4.3.5 * Tweaks to the default encoding options ------------------------------------------------------------------- Tue Nov 10 20:26:00 UTC 2020 - neutrino8@opensuse.org - Update to version 4.3.4 * Bump up psy-rd from 3.3 to 4.0 * Lower deblock strength to -4,-4 * Enable strong intra smoothing * Lower rskip edge threshold to 2 ------------------------------------------------------------------- Mon Oct 05 19:22:00 UTC 2020 - neutrino8@opensuse.org - Update to version 4.3.3 * Fixed an issue in default encoding option where using a CTU of 64 can cause visual distortion when using rskip=2 (edge density). Workaround is to use a CTU of 32 and qg-size of 32 ------------------------------------------------------------------- Sat Oct 03 11:31:00 UTC 2020 - neutrino8@opensuse.org - Update to version 4.3.2 * Lower edge density recursion skip to 3% * Lower RC lookahead to 80 * Lower subme from 5 to 4 ------------------------------------------------------------------- Mon Jul 13 09:37:00 UTC 2020 - neutrino8@opensuse.org - Update to version 4.3.1 * Enable tskip and hme in default encoding options * Merge mp4 audio support with ts/m2ts/mts in the case statement for additional container formats * Removed not in use, commented out code * Lower default AAC audio bitrate from 448 to 384 kbps ------------------------------------------------------------------- Sat Jul 04 18:52:00 UTC 2020 - neutrino8@opensuse.org - Update to version 4.3.0 * Switch to rskip mode 2 (edge density). Should prevent onion artifacts and speed up encoding a bit ------------------------------------------------------------------- Sun Jun 21 15:10:00 UTC 2020 - neutrino8@opensuse.org - Update to version 4.2.9 * Fixed a bug that prevents using TrueHD mono audio in the MP4 container ------------------------------------------------------------------- Tue Jun 16 19:05:00 UTC 2020 - neutrino8@opensuse.org - Update to version 4.2.8 * Support TrueHD audio in the MP4 container * Lower max-merge from 4 to 2 ------------------------------------------------------------------- Sat Apr 25 07:15:00 UTC 2020 - neutrino8@opensuse.org - Update to version 4.2.7 * Update default encoding options ------------------------------------------------------------------- Fri Mar 27 06:45:00 UTC 2020 - neutrino8@opensuse.org - Update to version 4.2.6 * Check for MPlayer only if AUTOCROP is enabled ------------------------------------------------------------------- Mon Mar 23 06:09:00 UTC 2020 - neutrino8@opensuse.org - Update to version 4.2.5 * Add -max_muxing_queue_size switch to workaround possible issues when muxing Atmos/DTS-X audio ------------------------------------------------------------------- Sun Mar 22 02:56:00 UTC 2020 - neutrino8@opensuse.org - Update to version 4.2.4 * Bugfix: -c used instead of -ac for audio channels ------------------------------------------------------------------- Sat Mar 21 10:33:00 UTC 2020 - neutrino8@opensuse.org - Update to version 4.2.3 * Update default encoding options ------------------------------------------------------------------- Thu Mar 05 21:05:00 UTC 2020 - neutrino8@opensuse.org - Update to version 4.2.2 * Go back to FFmpeg for crop detection ------------------------------------------------------------------- Sun Feb 23 14:56:00 UTC 2020 - neutrino8@opensuse.org - Update to version 4.2.1 * Use MPlayer for crop detection instead of FFmpeg which seems to have issues with 4k/UHD content ------------------------------------------------------------------- Thu Jan 16 15:49:00 UTC 2020 - neutrino8@opensuse.org - Update to version 4.2.0 * Minor optimizations to the default encoding options. Lower qcomp to 0.7 ------------------------------------------------------------------- Wed Jan 08 15:09:00 UTC 2020 - neutrino8@opensuse.org - Update to version 4.1.9 * Rename hdr option to hdr10. Requires latest libx265 compiled from the default branch * Rename hdr-opt to hdr10-opt. Requires latest libx265 compiled from the default branch * Support HLG (Hybrid Log Gamma) HDR * Some minor psy-rd/rdoq tunings ------------------------------------------------------------------- Sat Jan 04 20:56:00 UTC 2020 - neutrino8@opensuse.org - Update to version 4.1.8 * More psycho-visual tunings ------------------------------------------------------------------- Fri Jan 03 17:58:00 UTC 2020 - neutrino8@opensuse.org - Update to version 4.1.7 * Add option to force signaling of HDR in case max-cll is 0,0 ------------------------------------------------------------------- Mon Dec 31 17:00:00 UTC 2019 - neutrino8@opensuse.org - Update to version 4.1.6 * Go back to uniform AQ (mode 1) with a strength of 1.0 * Bump up qcomp to 0.72 * Increase psy-rdoq to 15.0 and psy-rd to 4.0 * Increase reference frames to 5 ------------------------------------------------------------------- Mon Dec 30 23:18:00 UTC 2019 - neutrino8@opensuse.org - Update to version 4.1.5 * psy-rd/psy-rdoq psycho-visual tuning to the default encoding options. Aim is to preserve the energy of the input as much as possible without introducing noticable artifacts such as ringing ------------------------------------------------------------------- Sat Dec 28 15:40:00 UTC 2019 - neutrino8@opensuse.org - Update to version 4.1.4 * Add support for the noise video filter. Can be beneficial on (very) clean sources by applying some noise to avoid things like color/light banding in the encode * Fine-tuning to the default encoding options ------------------------------------------------------------------- Wed Dec 25 08:35:00 UTC 2019 - neutrino8@opensuse.org - Update to version 4.1.3 * More fine-tuning to the default encoding options that should preserve noise and especially mosquito noise on dark backgrounds while at the same time increasing quality with a slightly higher bitrate cost ------------------------------------------------------------------- Tue Dec 24 11:21:00 UTC 2019 - neutrino8@opensuse.org - Update to version 4.1.2 * Increase deblocking values from -3,-3 to -1,-1 * Enable strong intra smoothing * Lower qcomp to its default value of 0.6 ------------------------------------------------------------------- Tue Dec 24 04:29:00 UTC 2019 - neutrino8@opensuse.org - Update to version 4.1.1 * Switch to AQ mode 2 * Increase default bframes from 6 to 8 * Keep quantization group size at the same size as the max CTU ------------------------------------------------------------------- Mon Dec 23 06:10:00 UTC 2019 - neutrino8@opensuse.org - Update to version 4.1.0 * Default encoding options tweaks. Add qcomp=0.7 and go back to standard non-hierarchical motion estimation. Also increased tu-{inter,intra}-depth to 4 and reference frames to 5 * Lower default CRF value to 20 ------------------------------------------------------------------- Thu Dec 19 14:55:00 UTC 2019 - neutrino8@opensuse.org - Update to version 4.0.9 * Update default encoding options, v3 ------------------------------------------------------------------- Sat Dec 14 18:06:00 UTC 2019 - neutrino8@opensuse.org - Update to version 4.0.8 * Update default encoding options and CRF value; v2 ------------------------------------------------------------------- Sat Dec 14 05:09:00 UTC 2019 - neutrino8@opensuse.org - Update to version 4.0.7 * Update default encoding options and CRF value ------------------------------------------------------------------- Thu Dec 12 20:43:00 UTC 2019 - neutrino8@opensuse.org - Update to version 4.0.6 * Update the default encoding options ------------------------------------------------------------------- Mon Nov 11 13:51:00 UTC 2019 - neutrino8@opensuse.org - Update to version 4.0.5 * Added support for the (newer) deblock filter ------------------------------------------------------------------- Mon Nov 04 16:30:00 UTC 2019 - neutrino8@opensuse.org - Update to version 4.0.4 * Bugfix: Using ADPCM encoding for DTS audio wasn't possible due to wrong variable used in the if conditional ------------------------------------------------------------------- Sat Nov 02 13:55:00 UTC 2019 - neutrino8@opensuse.org - Update to version 4.0.3 * Merged two case statements in the metadata code for mkv/mp4/mov * Support dithering when downscaling to 8-bit pixels ------------------------------------------------------------------- Tue Oct 29 06:17:00 UTC 2019 - neutrino8@opensuse.org - Update to version 4.0.2 * Removed an unneeded check for audio codec in the conerror_func() function * Removed a stale "" in the case statement that checks the channels for AC3 * Support setting the matrixed stereo type when resampling stereo input * Support setting the filter type of the audio resample filter * Add the bsf bitstream filter to convert from length prefix to start code prefix when remuxing to m2ts/mts/ts * Cosmetics ------------------------------------------------------------------- Mon Oct 28 05:30:00 UTC 2019 - neutrino8@opensuse.org - Update to version 4.0.1 * Added support for director/cast metadata for MP4/MOV * Added +use_metadata_tags to the $movflags variable for MP4/MOV * Support ADPCM encoding for DTS audio * Fixed an issue where asking for director/cast occured multiple times if remuxing to other containers was enabled ------------------------------------------------------------------- Sun Oct 27 07:28:00 UTC 2019 - neutrino8@opensuse.org - Update to version 4.0.0 * Use 16 bits as bit depth metadata when encoding to TrueHD audio * Removed an unneeded if conditional in the audio bit depth code * Add director and cast metadata for the MKV container * Reorder some code for the output shell file * Cosmetics ------------------------------------------------------------------- Sat Oct 26 07:05:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.9.9 * Renamed audio variable aid[i] to aidx[i] and moved it outside of the if conditional that decides the audio codec. This removes the same code in three places and now uses the global aidx[i] variable * HE-AACv2 only supports 2 channels. Update the audio code to reflect that * When running in batch mode, add a warning about automatic audio metadata and offer an option to enable/disable it * Added -tmp option to MP4Box to store temp files in the output directory * Some minor improvements to the audio options ------------------------------------------------------------------- Fri Oct 25 05:31:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.9.8 * Removed M4V from the case statements for cover art. I confused it with ffx264 which supports M4V while ffhevc does not. * Detect audio bit depth and add it to the audio metadata * Added detection for DTS Express and DTS-HD HR for audio copy * Use -show_entries instead of -show_streams for detecting audio properties with ffprobe. Removes piping to grep and awk * Support setting the FLAC bit depth for encoding * Minor restructuring and variables renaming in the audio code * Updated the man page ------------------------------------------------------------------- Wed Oct 23 03:15:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.9.6 * Added support for setting the VBV maxrate and buffer size * Set default audio codec based on output container format * Add colr option for MP4Box to the video_colorspace_func() function and the color primaries code. Only used for MOV * Add -color_primaries, -color_trc and -colorspace to the FFmpeg command line options ------------------------------------------------------------------- Tue Oct 22 04:20:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.9.5 * Add support for SRT/SSA/AAS subtitles for the MOV container * Add color characteristics to MP4Box if output is MOV * Use smpte170m for option 0 in the color primaries code * Update colormatrix in the video_colorspace_func() function to smpte170m for NTSC * Some code optimizations ------------------------------------------------------------------- Mon Oct 21 08:43:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.9.4 * Renamed variables $MDATA and $CHPS to $METADATA and $CHAPS * Add $METADATA and $CHAPS to the remuxing code ------------------------------------------------------------------- Mon Oct 21 03:40:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.9.3 * Add support for verbose logging to a log file * Bugfix: -map_metadata and -map_chapters where not set to 0 when the respective options in the config file were set to "y" ------------------------------------------------------------------- Sun Oct 20 04:39:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.9.2 * Added support for embedding of SRT/SSA/ASS subtitles in the MP4 container * Moved back to MP4Box for adding cover art to MP4/MOV. Apparently, after lots of testing, atomicparsley creates files that hang during playback * Cosmetics * Updated the man page ------------------------------------------------------------------- Sat Oct 19 07:16:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.9.1 * Use atomicparsley to add cover art for the mp4/m4v containers. This removes dependence on MP4Box and makes it possible to copy over metadata info in an easy way * Add +frag_keyframe to the -movflags option when output is mp4 * Renamed variable METACOVER to MKVCOVER * Updated the man page ------------------------------------------------------------------- Fri Oct 18 04:56:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.9.0 * Bugfix: use correct video track for crop preview with MPlayer * Renamed variable SCAN_MULTIPLE_VID_TRACKS to SCAN_MULTI_VID_TRACKS * Some reordering in the config file * Add option hrd and vui-hrd-info when encoding HDR video * Add LPCM detection for audio copy * Add support for cover art for the mp4 and mov containers. Requires MP4Box from GPAC * Set Catmull-Rom as default Bicubic/Spline tuning * Some code optimization ------------------------------------------------------------------- Wed Oct 16 05:20:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.8.9 * Support the fftdnoiz denoise filter ------------------------------------------------------------------- Tue Oct 15 03:57:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.8.8 * Bugfix: use correct video mapping for crop detection * Cosmetics ------------------------------------------------------------------- Mon Oct 14 14:34:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.8.7 * Support scanning for multiple video tracks in the input file ------------------------------------------------------------------- Sun Oct 13 05:35:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.8.6 * Fixed a typo in the keyframe code * Use readlink -e and realpath -e where needed * Updated default encoding options and CRF value * Updated the preset.txt example file ------------------------------------------------------------------- Fri Oct 11 10:26:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.8.5 * Support hardcoding external or embedded subtitles. Requires libass support in FFmpeg * Fixed a typo in the subtitles code ------------------------------------------------------------------- Wed Sep 25 09:53:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.8.4 * Revert using audindex[i] var for audio metadata detection ------------------------------------------------------------------- Wed Sep 25 06:23:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.8.3 * Use the audindex[i] variable for audio metadata during audio copy * Updated default encoding options. Requires latest x265 from git * Updated default audio bitrates for some codecs ------------------------------------------------------------------- Sun Sep 22 05:00:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.8.2 * For audio stream copy, in case ffprobe reports channels layout as unknown, try to guess the amount of channels based on channel detection and use that as metadata * Set Mobisu transform as default for HDR to SDR * Updated the man page ------------------------------------------------------------------- Sat Sep 21 05:30:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.8.1 * Add side channel info to the audio metadata ------------------------------------------------------------------- Thu Sep 19 03:58:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.8.0 * Support encoding to WMAv1 and WMAv2 audio * Update high bit depth pixel formats options * Add WMAv1 and WMAv2 audio detection metadata when doing audio copy ------------------------------------------------------------------- Wed Sep 18 07:58:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.7.9 * Improvements to the audio copy metadata ------------------------------------------------------------------- Fri Sep 13 14:12:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.7.8 * Add audio channel metadata when using audio copy ------------------------------------------------------------------- Thu Sep 05 03:30:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.7.7 * Code optimization in the audio sample rate metadata ------------------------------------------------------------------- Thu Aug 29 07:48:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.7.6 * Use a comma instead of a dash for the audio sample rate metadata ------------------------------------------------------------------- Wed Aug 21 14:32:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.7.5 * Add audio sample rate to the audio metadata * Fixed a bug in the audio resample code where sample rate wasn't detected due to wrong value used (bit_rate instead of sample_rate) ------------------------------------------------------------------- Mon Aug 05 14:15:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.7.4 * Update default encoding options v2 ------------------------------------------------------------------- Sat Aug 03 10:48:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.7.3 * Update default encoding options ------------------------------------------------------------------- Tue Jul 23 11:15:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.7.2 * Added support for crop preview using MPlayer when autocrop is enabled in the config file. This was ported over from my h264enc script ------------------------------------------------------------------- Fri Jul 12 13:55:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.7.1 * Updated the default encoding params. Added the new hme (hierarchical motion search) and hme-search options. Also lowered rd to 4 and increased subme to 4. To use hme, the latest x265 from git is required ------------------------------------------------------------------- Thu Jun 13 02:30:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.7.0 * Added support for the bm3d denoise filter ------------------------------------------------------------------- Sat Mar 02 07:10:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.6.9 * Add HDR_SUPPORT option to config file for making HDR support optional ------------------------------------------------------------------- Sat Jan 12 11:05:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.6.8 * Set Open GOP to 0 and repeat headers to 1 when Dolby Vision is used ------------------------------------------------------------------- Fri Jan 11 13:15:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.6.7 * Check if tonemap is used and if so, disable Dolby Vision questions ------------------------------------------------------------------- Thu Jan 10 11:10:00 UTC 2019 - neutrino8@opensuse.org - Update to version 3.6.6 * Support Dolby Vision HDR ------------------------------------------------------------------- Sat Dec 22 11:22:00 UTC 2018 - neutrino8@opensuse.org - Update to version 3.6.5 * Add the new tune animation option * Updated the man page ------------------------------------------------------------------- Tue Jul 10 20:35:00 UTC 2018 - neutrino8@opensuse.org - Update to version 3.6.4 * Revert previous change. Linear transfer is already set in the $tonemap variable ------------------------------------------------------------------- Mon Jul 09 21:59:00 UTC 2018 - neutrino8@opensuse.org - Update to version 3.6.3 * HDR to SDR: transfer to linear light before doing bt2020-10/12 transfer ------------------------------------------------------------------- Sun Apr 15 06:48:00 UTC 2018 - neutrino8@opensuse.org - Update to version 3.6.2 * Support setting the chroma location parameter ------------------------------------------------------------------- Tue Mar 20 12:06:00 UTC 2018 - neutrino8@opensuse.org - Update to version 3.6.1 * Support 12-bits in the pixel format function * Improvements to the HDR to SDR conversion code, copy color characteristics option * A few typo fixes ------------------------------------------------------------------- Sat Feb 24 10:50:00 UTC 2018 - neutrino8@opensuse.org - Update to version 3.6.0 * Set the eq saturation default value to 1.0 (same as filter default) * Add the colorspace and colormatrix filters when doing an HDR to SDR conversion * Lower tonemap desat strength to 2.8 * Support white point adaptation for HDR to SDR * Moved the colorspace filter after the scale one * Moved the pixel format filter near the end of the filter chain ------------------------------------------------------------------- Thu Feb 22 10:40:00 UTC 2018 - neutrino8@opensuse.org - Update to version 3.5.9 * Support per-file HDR side data when running in batch mode * Minor code optimizations ------------------------------------------------------------------- Sat Feb 17 11:52:00 UTC 2018 - neutrino8@opensuse.org - Update to version 3.5.8 * Fixed an issue where in some cases write-testing the output directory will fail due usage of readlink -f instead of readlink -m * Small code optimizations ------------------------------------------------------------------- Fri Feb 16 21:00:00 UTC 2018 - neutrino8@opensuse.org - Update to version 3.5.7 * Implemented HDR side data scanning * Rewrote the hdr script ------------------------------------------------------------------- Fri Feb 16 10:31:00 UTC 2018 - neutrino8@opensuse.org - Update to version 3.5.6 * Replace an ffprobe log level occurance of -v error to -v quiet * Added a small script called "hdr" to get HDR values from a file which then can be used in ffhevc's HDR options menu ------------------------------------------------------------------- Wed Feb 07 04:15:00 UTC 2018 - neutrino8@opensuse.org - Update to version 3.5.5 * Update transfer chars to support latest changes to zimg from git ------------------------------------------------------------------- Mon Jan 08 19:45:00 UTC 2018 - neutrino8@opensuse.org - Update to version 3.5.4 * Fixed a possible devision by 0 that may occur when one copies audio and the bitrate for metadata is reported as N/A by ffprobe ------------------------------------------------------------------- Sat Jan 06 00:18:00 UTC 2018 - neutrino8@opensuse.org - Update to version 3.5.3 * Moved the eq filter to almost the end of the video filter chain as it can lead to banding in certain cases in case the filter is in front of most other ones * If the eq filter is used, also insert the format one after it if a pixel format has been chosen ------------------------------------------------------------------- Thu Jan 04 20:09:00 UTC 2018 - neutrino8@opensuse.org - Update to version 3.5.2 * Support tweaking the tonemap algorithms for HDR to SDR conversion * Increased default desat tonemap value from 2.3 to 4.2 * Support applying color saturation correction when doing an HDR to SDR conversion * Added bt2020-12 to the list of transfers when doing color characteristics copy * Updated the HDR_to_SDR_instructions.txt file ------------------------------------------------------------------- Wed Jan 03 08:29:00 UTC 2018 - neutrino8@opensuse.org - Update to version 3.5.1 * Don't hardcode the desaturation strength of the tonemap filter but let is be an option * Removed the matrix and primaries options in the zscale filter as it leads to over-saturation of colors ------------------------------------------------------------------- Tue Jan 02 12:03:00 UTC 2018 - neutrino8@opensuse.org - Update to version 3.5.0 * Disabled audio metadata for batch mode when using audio copy, until I figure out how to do it in a decent way * Removed default software scaler parameters for bicubic/spline They are already the default in FFmpeg so no need to force them * Use a case statement instead of if condition in option 0 of the video_hdr_to_sdr_func() function ------------------------------------------------------------------- Mon Jan 01 23:03:00 UTC 2018 - neutrino8@opensuse.org - Update to version 3.4.9 * Set proper zscale transfer value in the video_hdr_to_sdr_func() function, option 0 (copy color characteristics) * Use a desat value of 2.5 for the tonemap filter when doing HDR to SDR conversions * Don't use pix_fmts in the format filter. It is not really needed * Removed 12-bit options from the video_pixfmt_func() function * Cosmetics ------------------------------------------------------------------- Mon Jan 01 10:18:00 UTC 2018 - neutrino8@opensuse.org - Update to version 3.4.8 * Reworked the video_chars_func() function and added reporting of video bit depth * Initial support for audio codec metadata when doing audio copy * Increased default E-AC-3 audio bitrate from 768 to 960 kbps * Set dialnorm for AC-3/E-AC-3 to its FFmpeg default (-31) * Added HDR_to_SDR_instructions.txt file to the package * Cosmetics ------------------------------------------------------------------- Wed Dec 27 11:37:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.4.7 * Renamed array variable CHARS to VCHARS in the video_chars_func() function * Report pixel format in the video_chars_func() function * Don't show HDR options if doing an HDR to SDR conversion * Use -v quiet instead of -v error log level for ffprobe * Cosmetics ------------------------------------------------------------------- Mon Dec 25 10:36:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.4.6 * Initial support for HDR to SDR conversions. Requires FFmpeg to be compiled with the zimg library as it needs the zscale filter https://github.com/sekrit-twc/zimg ------------------------------------------------------------------- Tue Nov 28 18:35:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.4.5 * Disable Open GOP and enable header repeating when HDR options are enabled like master display and max-cll ------------------------------------------------------------------- Fri Nov 17 16:43:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.4.4 * Update transfer characteristics: smpte-st-2084 -> smpte2084. Requires latest x265 ------------------------------------------------------------------- Sun Oct 22 17:37:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.4.3 * Support dialog level normalization for AC3/EAC3 audio ------------------------------------------------------------------- Fri Sep 29 15:45:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.4.2 * Support setting the output video aspect ratio ------------------------------------------------------------------- Wed Aug 23 09:53:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.4.1 * Support full chroma input for the software scaler ------------------------------------------------------------------- Fri Jul 21 13:52:00 UTC 2017 - neutrino8@opensuse.org - Add realpath to the CHDIR var for batch mode ------------------------------------------------------------------- Thu Jul 20 18:49:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.4.0 * Bugfix: use realpath instead of readlink for the OUTPUT var when running in batch mode. Fixes the issue where readlink will follow the full path in case the input is a symlink which may result of encoding files we were not asked to * Don't print cropped resolution during runtime if batch mode is selected * Remove check for realpath. It is now required and not optional ------------------------------------------------------------------- Tue Jul 11 11:39:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.3.9 * Support setting the min/max keyframe/IDR intervals ------------------------------------------------------------------- Wed Jun 14 12:15:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.3.8 * Make software scaler tweaking optional * Added support for the unsharp filter for sharpen/blur * Use a colon symbol as separation for input/output color range in the video_colorspace_func() function as to be consistent with the other options. Also set the default to tv:tv ------------------------------------------------------------------- Tue Jun 13 00:02:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.3.7 * Bugfix in the video_colorspace_func() function. Wrong value used for the ispace option of the filter. Must be bt2020ncl instead of just bt2020 ------------------------------------------------------------------- Sun Jun 11 10:06:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.3.6 * Bugfix: master-display option must be enclosed in quotes to not confuse Bash ------------------------------------------------------------------- Sat Jun 10 07:55:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.3.5 * Replace numbers in array variable char of the video_chars_func() function with the ones from the for loop * Pipe the ffprobe string to tail -1 to work around issues with some problematic files * Some small improvements to the video_colorspace_func() function ------------------------------------------------------------------- Fri Jun 09 08:50:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.3.4 * New function, video_chars_func(), to detect and display video characteristics like color range/space/transfer/primaries * Detect and display video resolution if video scaling is enabled * Detect and display pixel format ------------------------------------------------------------------- Thu Jun 08 14:51:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.3.3 * Report software scaler set in the config file * Merge the bicubic and spline scaler tuning code * Mention for the Lanczos scaler that the scaler tuning value is the filter length and not sharpness ------------------------------------------------------------------- Mon Jun 05 03:55:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.3.2 * Remove redundant software scaler warning and exit in the sws_func() function for the config file * Added support for the experimental software scaler * Lower psy-rdoq from 2.5 to 1.5 and psy-rd from 2.5 to 2.0 to eliminate ringing artifacts * No need to enclose the values of max-cll in quotes * Removed additional encoder info on max audio channels support * Added support for software scaler tuning where applicable * Added example JSON file for Dynamic HDR10+ to the package * Updated the Makefile ------------------------------------------------------------------- Sun Jun 04 21:45:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.3.1 * Further optimizations to the default encoding options * Match software scaler options in config file with the ones inside the script. $SCALER in config file now takes a value between 0 and 9 * Do some basic checking of scaler option when it's set in the config file ------------------------------------------------------------------- Thu Jun 01 12:06:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.3.0 * Simplify the scale variable a bit * Support SMPTE170M colorspace conversion * Support SMPTE170M for color primaries/matrices/transfers ------------------------------------------------------------------- Tue May 30 11:35:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.2.9 * Bugfix: use an if conditional to set hdr-opt option * Increase default CRF value to 21 * Tune the default encoding parameters ------------------------------------------------------------------- Mon May 29 08:05:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.2.8 * Added support for Dynamic HDR10+ JSON files. Requires libx265 to be compiled with Dynamic HDR10+ support ------------------------------------------------------------------- Tue May 16 08:57:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.2.7 * Added support for FFmpeg's internal Opus audio encoder ------------------------------------------------------------------- Sun May 14 09:36:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.2.6 * Bugfix in the software scale code. Use an if conditional to check for an y/n answer ------------------------------------------------------------------- Sat May 13 18:04:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.2.5 * Support accurate rounding for the software scalers * Support full chroma interpolation for the software scalers * Use the flags option of the scale option instead of -sws_flags to set scaler and its options ------------------------------------------------------------------- Mon Apr 03 19:04:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.2.4 * Support setting the input/output color range ------------------------------------------------------------------- Tue Mar 28 19:04:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.2.3 * Update to the default encoding options ------------------------------------------------------------------- Sat Mar 18 22:00:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.2.2 * Update colorspace entry for NTSC video * Fixed bug in the video_colorspace_func() values ------------------------------------------------------------------- Mon Mar 06 21:30:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.2.1 * Update audio compression level values * Initial support for HDR VUI signaling ------------------------------------------------------------------- Wed Feb 22 15:05:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.2.0 * Support high FPS -> low FPS conversions * Bugfix: missing options in FPS conversion menu ------------------------------------------------------------------- Mon Feb 06 20:43:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.1.9 * Support the framestep filter for FPS conversion * Support halving the frame rate. Only supported for 50/59.940/60 FPS input ------------------------------------------------------------------- Wed Jan 25 12:00:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.1.8 * Small improvement: add "Track $i:" to the question for audio channel layout ------------------------------------------------------------------- Tue Jan 24 16:20:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.1.7 * Removed one of the OUTPUT variables for batch mode. It is no longer needed * Rewrote the audio channel layout code. It is now based on per-codec encoder support * Repositioned the audio channel checking code ------------------------------------------------------------------- Fri Jan 20 13:37:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.1.6 * Fixed a small issue in the output for batch mode ------------------------------------------------------------------- Wed Jan 18 14:05:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.1.5 * Check channel amount for the libfdk_aac encoder and warn and exit on 7 channels as it doesn't support it * Use range=tv instead of range=mpeg for the color conversion filter * Bugfix: return value of variable autocrop wasn't checked when running in batch mode resulting in always cropping the input files * Bugfix in the $OUTPUT variable when running in batch mode * Removed readlink from the batch mode variables as it's no longer needed ------------------------------------------------------------------- Sun Jan 15 11:44:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.1.4 * Support ALAC audio encoding * Some small improvements to the audio code * A few variable renamings, mostly in the case statements ------------------------------------------------------------------- Fri Jan 13 11:43:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.1.3 * Support 50 <-> 60/59.940 FPS conversions * Use upper-case words for the color primaries/transfers/matrices and pixel formats * Support 4.0 audio channel layout in addition to Quad ------------------------------------------------------------------- Thu Jan 12 00:26:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.1.2 * Added support for pixel format conversion * Added support for colorspace conversion ------------------------------------------------------------------- Mon Jan 09 12:45:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.1.1 * Fix a possible issue when detecting the FPS value that occurs with some files * Expand directory path internally instead of exporting the dirname command to the file that gets sourced for encoding * Use 'bc' for calculating the detected FPS value * Only use fractions internally for FPS values. The user should be presented with the floating point value ------------------------------------------------------------------- Sun Jan 08 11:24:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.1.0 * Support SMPTE-2084 transfer characteristics * Placed the video post-processing filters in their own sub-menu * Some small changes to the FPS conversion code ------------------------------------------------------------------- Fri Jan 06 10:53:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.0.9 * Bugfix: default output directory wasn't made when running in batch mode * Display found per-file crop values when running in batch mode ------------------------------------------------------------------- Thu Jan 05 11:35:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.0.8 * Support per-file auto-cropping when running in batch mode * Use internally full paths for input and output * Add a test case for output directory to the script that gets sourced for encoding ------------------------------------------------------------------- Wed Jan 04 13:02:00 UTC 2017 - neutrino8@opensuse.org - Update to version 3.0.7 * Use readlink to get the full path to the cover art image. Fixes an issue when running in batch mode ------------------------------------------------------------------- Fri Dec 02 14:42:00 UTC 2016 - neutrino8@opensuse.org - Update to version 3.0.6 * Merged the output code for the batch mode with that for single file input * Fixed an issue where remuxing to MP4 may fail in case the user chooses FLAC audio * Renamed variable $extracon to $remuxcon and $econ to $rcon * Made strict option "global" so I won't have to worry about adding experimental audio codecs support in the future * Clean ups to the FPS conversion menu ------------------------------------------------------------------- Wed Nov 23 15:20:00 UTC 2016 - neutrino8@opensuse.org - Update to version 3.0.5 * Added support for FLAC audio in MP4. Requires a very recent ffmpeg version * Added the $strict variable to the remuxing code * Use the improved way of gathering info for the audio sample rate detection * Added the ability to flag the first internal or external subtitle as default, when using the option for internal and external subtitle copying * Added support for LD-AAC audio encoding with libfdk-aac * Removed stderr to stdout redirection (2>&1) for some of the ffprobe lines. It is no longer needed ------------------------------------------------------------------- Sun Nov 20 16:44:00 UTC 2016 - neutrino8@opensuse.org - Correct a small issue in the cropping code - Update the Makefile ------------------------------------------------------------------- Sun Nov 20 14:02:00 UTC 2016 - neutrino8@opensuse.org - Update to version 3.0.4 * Moved checks for supported containers into its own function, check_container_func() * Improvements to gathering information about the input file. Saves us piping to sed and in some cases piping to awk and tail * Removed the NOSOUND option since the user can specify 0 for amount of audio tracks which equals to encoding with the NOSOUND option * Placed both subcopy and subcpy variables into a single subparams variable. This also removes the NOSUBS variable * Placed the video length detection code into its own function, video_length_func(), as it is used in two places so we can save writing the same stuff twice * Instead of skipping bitrate calc for target file size in case we can't detect the video length, ask the user to provide it * Removed install script and added a Makefile for installation * Added new INSTALL file with install/uninstall instructions ------------------------------------------------------------------- Fri Nov 18 01:35:00 UTC 2016 - neutrino8@opensuse.org - Update to version 3.0.3 * Use process number instead of .old when renaming existing files * Added support for detelecining (IVTC). Bumps up config file version to 33 * Minor improvements to the cropping code ------------------------------------------------------------------- Wed Nov 16 09:18:00 UTC 2016 - neutrino8@opensuse.org - Update to version 3.0.2 * Added support for 3-pass encoding * Added support for setting a default audio codec in the config file. Bumps up config file version to 32 * Moved setting the video bitrate before the video filters * More variables renamings and other small code tweaks * Do some checking on duplicate entries when using additional containers and warn and exit * Updated the man page ------------------------------------------------------------------- Mon Nov 14 09:18:00 UTC 2016 - neutrino8@opensuse.org - Update to version 3.0.1 * Set default amount of subtitles to 1 instead of exiting when no value is given * Allow the user to choose the amount of audio tracks he wants at run time instead of requiring it to be set in the config file. This removes config file var MAX_AUD_TRACKS and bumps up version to 31 * Renamed array variables audmapval and submapval to audindex and subindex since we're not mapping but specifying the audio/sub index id with these vars * Fixed a possible case where audio params weren't cleared in case the nosound option was chosen * Removed an if conditional checking for MAX_SUBS which no longer is used ------------------------------------------------------------------- Sun Nov 13 11:36:00 UTC 2016 - neutrino8@opensuse.org - Update to version 3.0.0 * Added support for batch encoding mode, to be activated with the new -b option. It's used to encode directories with video files * Renamed variable $mode to $encmode for clarity * Reworked the input/output code * Disabled strong-intra-smoothing in the default x265 options in the config file * Instead of relying on a config var to set the subtitles amount to support, ask the user each time to provide it. Makes the code less complex and easier to extend in the future. Bumps up config file version to 30 * Check if the X265PARAMS var is missing from config in case we're not using an x265 preset * Updated the man page ------------------------------------------------------------------- Sat Nov 12 10:48:00 UTC 2016 - neutrino8@opensuse.org - Update to version 2.9.9 * Added support for importing external srt/ssa subtitles for the mkv, m2ts, mts and ts containers * Moved the subtitle code into its own video_subtitles_func() function * Added support for simultaneously copying subtitles from the input file and copying external ones * Renamed variable SUBT to SUBNR for clarity * Updated the README file and man page ------------------------------------------------------------------- Thu Nov 10 21:15:00 UTC 2016 - neutrino8@opensuse.org - Update to version 2.9.8 * Check if name of input file matches that of output file and warn and exit. Requires the realpath utility * Added support for the m2ts, mts and ts containers * Merged the code that checks if an audio codec is supported by a container with that that checks for additional output containers. Removes code duplication and maintainability * Update to the audio sample rates. Sync them with ffmpeg -h encoder=<encoder> * Restrict TrueHD channels to 2, 5 and 6 as that's what the encoder supports * Updated the README file ------------------------------------------------------------------- Wed Nov 09 07:00:00 UTC 2016 - neutrino8@opensuse.org - Update to version 2.9.7 * Renamed config var CON to CONFMT. Updates config file version to 29 * Reduced some duplication in the audio codec checks for the container formats * Reduced some error message duplication when checking if an additional container supports an audio codec * Rework to the additional container selection code * Added color functions for the additional container conversion * Added back support for the MOV container ------------------------------------------------------------------- Tue Nov 08 10:10:00 UTC 2016 - neutrino8@opensuse.org - Update to version 2.9.6 * Added support for encoding to TrueHD audio. Requires a very recent ffmpeg version, preferably latest from git * Some small improvements to the additional container output * Moved the video_deinterlace_func() function inside the actual deinterlace code * Update to the README file * Update to the man page ------------------------------------------------------------------- Mon Nov 07 16:25:00 UTC 2016 - neutrino8@opensuse.org - Update to version 2.9.5 * Cosmetics in the code for deinterlacing * Instead of skipping FPS conversion if the FPS can't be detected, ask the user to provide it * Use single brackets instead of double ones in the nosound setup code * Added license snippet at the top of the script * Added support for outputting to additional container formats * Do some checking on supported audio codecs for the supported containers * Check specified container and warn and exit if it's not supported * Support setting the FLAC compression level * Break out of the if conditionals in the audio code and replace them with two case statements * Update to the README file ------------------------------------------------------------------- Sun Nov 06 09:52:00 UTC 2016 - neutrino8@opensuse.org - Update to version 2.9.4 * Bugfix: resampling wasn't working for fdk-aac due to missing value in the case statement * Check if output file exists and if so, move it to $file.old * Use test directly instead of an if condition to set the audio filters * Support bitrate calculations for target file size when doing audio copy * Use fdk* in the case statements for easier typing * Renamed variable astrm to astream for clarity * Use [1-2]p in the case statements for passmodes instead of 1p|2p * New function, video_field_parity_func(), to detect and report the interlace field order. Used by motion-compensation deinterlacing and interlaced encoding * Detect and display audio sample rate in case resampling is chosen * Improvements to the video_fps_func() function. Get the FPS value directly instead of outputting to a file and reading it ------------------------------------------------------------------- Sat Nov 05 10:56:00 UTC 2016 - neutrino8@opensuse.org - Update to version 2.9.3 * Use a single var, $ofps, to set the output FPS for both deinterlace bobbing and FPS conversion * Use new $bob var to indicate that we do bobbing and use that var to disable FPS conversion * Renamed $fp var in video_deinterlace_func() to $fpar * Print a warning message that FPS conversion gets disabled if the user chooses audio copy * Added support for the FDK-AAC audio codec. Requires ffmpeg to be compiled with libfdk-aac support * Support FPS conversion with the 'fps' filter * Some minor code optimizations ------------------------------------------------------------------- Fri Nov 04 10:43:00 UTC 2016 - neutrino8@opensuse.org - Update to version 2.9.2 * Bugfix: the scale variable was used twice for different things causing an overwrite of the scale filter parameters, which eventually results in ffmpeg complaining and exiting * Added support for NTSC <-> NTSC and NTSC <-> PAL frame rate conversions * New var in config file, VID_FPS_CONVERT, to enable/disable FPS conversion. Bumps up config file version to 28 * Moved the FPS detection code into its own function so it can be easily reused * Minor cosmetics * Updated the README file ------------------------------------------------------------------- Thu Nov 03 15:29:00 UTC 2016 - neutrino8@gmail.com - Update to version 2.9.1 * Added support for interlace-aware encoding * Added support for the spp, uspp and pp7 deblockers * Support asking for software scaler during exec time * Added new SCALE var to the config file to enable/disable support for software scaling. Bumps up the config file version to 27 * Do a test write to see if output directory is writable by the script executing user * Updated the README file ------------------------------------------------------------------- Wed Nov 02 19:40:00 UTC 2016 - neutrino8@gmail.com - Update to version 2.9.0 * Added support for motion compensation deinterlacing for both deinterlacing at original FPS and bobbing * Use denoise var instead of denoiser for the denoise filters and rotate var instead of transpose for the transpose filter * Added support for deblocking with the fspp filter. This bumps up the config file version to 26 * Update to the README file ------------------------------------------------------------------- Tue Nov 01 00:35:00 UTC 2016 - neutrino8@gmail.com - Update to version 2.8.9 * Added support for bobbing (deinterlace at double FPS) * Cosmetics: add menu header to the Color Primaries option ------------------------------------------------------------------- Tue Oct 18 20:26:00 UTC 2016 - neutrino8@gmail.com - Add changes file
Locations
Projects
Search
Status Monitor
Help
Open Build Service
OBS Manuals
API Documentation
OBS Portal
Reporting a Bug
Contact
Mailing List
Forums
Chat (IRC)
Twitter
Open Build Service (OBS)
is an
openSUSE project
.