Packman Build Service PMBS

_service Changed

@@ -29,7 +29,6 @@
 		<param name="exclude">synfig-core/NEWS</param>
 		<param name="exclude">synfig-core/README</param>
 		<param name="exclude">synfig-core/TODO</param>
-		<param name="exclude">synfig-core/build_tools/Makefile.am</param>
 		<param name="exclude">synfig-core/build_tools/autorevision.sh</param>
 		<param name="exclude">synfig-core/config/ltmain.patch</param>
 		<param name="exclude">synfig-core/config/package</param>
@@ -42,12 +41,10 @@
 		<param name="exclude">synfig-core/src/cmake/install_header.cmake</param>
 		<param name="exclude">synfig-core/src/config.h.cmake.in</param>
 		<param name="exclude">synfig-core/src/modules/CMakeLists.txt</param>
-		<param name="exclude">synfig-core/src/modules/Makefile.am</param>
 		<param name="exclude">synfig-core/src/modules/lyr_freetype/CMakeLists.txt</param>
 		<param name="exclude">synfig-core/src/modules/lyr_freetype/lyr_freetype.nsh</param>
 		<param name="exclude">synfig-core/src/modules/lyr_freetype/unlyr_freetype.nsh</param>
 		<param name="exclude">synfig-core/src/modules/lyr_std/CMakeLists.txt</param>
-		<param name="exclude">synfig-core/src/modules/lyr_std/Makefile.am</param>
 		<param name="exclude">synfig-core/src/modules/mod_bmp/CMakeLists.txt</param>
 		<param name="exclude">synfig-core/src/modules/mod_bmp/unmod_bmp.nsh</param>
 		<param name="exclude">synfig-core/src/modules/mod_dv/CMakeLists.txt</param>
@@ -108,7 +105,6 @@
 		<param name="exclude">synfig-core/src/modules/mod_yuv420p/mod_yuv420p.nsh</param>
 		<param name="exclude">synfig-core/src/modules/mod_yuv420p/unmod_yuv420p.nsh</param>
 		<param name="exclude">synfig-core/src/modules/mptr_mplayer/CMakeLists.txt</param>
-		<param name="exclude">synfig-core/src/modules/synfig_modules.cfg.in</param>
 		<param name="exclude">synfig-core/src/modules/template.nsh</param>
 		<param name="exclude">synfig-core/src/modules/untemplate.nsh</param>
 		<param name="exclude">synfig-core/src/synfig/CMakeLists.txt</param>
@@ -255,11 +251,8 @@
 		<param name="exclude">synfig-studio/brushes/CD_concept/CMakeLists.txt</param>
 		<param name="exclude">synfig-studio/brushes/CD_concept/Eraser.myb</param>
 		<param name="exclude">synfig-studio/brushes/CD_concept/Eraser_prev.png</param>
-		<param name="exclude">synfig-studio/brushes/CD_concept/Makefile.am</param>
 		<param name="exclude">synfig-studio/brushes/CD_concept/readme.txt</param>
 		<param name="exclude">synfig-studio/brushes/CMakeLists.txt</param>
-		<param name="exclude">synfig-studio/brushes/Makefile.am</param>
-		<param name="exclude">synfig-studio/build_tools/Makefile.am</param>
 		<param name="exclude">synfig-studio/build_tools/autorevision.sh</param>
 		<param name="exclude">synfig-studio/build_tools/sif2ico.sh</param>
 		<param name="exclude">synfig-studio/config/ltmain.patch</param>
@@ -267,7 +260,6 @@
 		<param name="exclude">synfig-studio/configure.ac</param>
 		<param name="exclude">synfig-studio/debugcrash</param>
 		<param name="exclude">synfig-studio/docs/bones_gui.txt</param>
-		<param name="exclude">synfig-studio/doxygen.cfg.in</param>
 		<param name="exclude">synfig-studio/images/CMakeLists.txt</param>
 		<param name="exclude">synfig-studio/images/about_icon.sif</param>
 		<param name="exclude">synfig-studio/images/action_add_to_set_icon.sif</param>
@@ -526,7 +518,6 @@
 		<param name="exclude">synfig-studio/plugins/lottie-exporter/properties/multiDimensionalKeyframed.py</param>
 		<param name="exclude">synfig-studio/plugins/lottie-exporter/properties/offsetKeyframe.py</param>
 		<param name="exclude">synfig-studio/plugins/lottie-exporter/properties/shapeKeyframed.py</param>
-		<param name="exclude">synfig-studio/plugins/lottie-exporter/properties/shapePropKeyframe/Makefile.am</param>
 		<param name="exclude">synfig-studio/plugins/lottie-exporter/properties/shapePropKeyframe/advanced_outline.py</param>
 		<param name="exclude">synfig-studio/plugins/lottie-exporter/properties/shapePropKeyframe/circle.py</param>
 		<param name="exclude">synfig-studio/plugins/lottie-exporter/properties/shapePropKeyframe/constant_width_outline.py</param>

_service:obs_scm:synfig-1.5.3.obscpio/synfig-core/build_tools/Makefile.am Added

_service:obs_scm:synfig-1.5.3.obscpio/synfig-core/src/modules/Makefile.am Added

@@ -0,0 +1,56 @@
+synfiglibdir = @SYNFIGLIB_DIR@
+
+MAINTAINERCLEANFILES = \
+	Makefile.in
+
+SUBDIRS = \
+	mod_particle \
+	mod_filter \
+	mod_yuv420p \
+	mod_gif \
+	mod_gradient \
+	mod_geometry \
+	mod_noise \
+	mod_libavcodec \
+	mod_jpeg \
+	mod_openexr \
+	mod_bmp \
+	mod_ppm \
+	mod_png \
+	mod_dv \
+	mod_imagemagick \
+	mod_ffmpeg \
+	lyr_freetype \
+	lyr_std \
+	mod_mng \
+	mod_svg \
+	mod_magickpp \
+	mod_example
+
+EXTRA_DIST = \
+	untemplate.nsh \
+	template.nsh \
+	mod_example/simplecircle.h \
+	mod_example/simplecircle.cpp \
+	mod_example/main.cpp \
+	mod_example/Makefile.am \
+	mod_example/metaballs.cpp \
+	mod_example/metaballs.h \
+	mod_mng/trgt_mng.h \
+	mod_mng/unmod_mng.nsh \
+	mod_mng/main.cpp \
+	mod_mng/Makefile.am \
+	mod_mng/mod_mng.nsh \
+	mod_mng/trgt_mng.cpp \
+	mptr_mplayer/main.cpp \
+	mptr_mplayer/mptr_mplayer.h \
+	mptr_mplayer/Makefile.am \
+	mptr_mplayer/mptr_mplayer.cpp \
+	mod_magickpp/trgt_magickpp.h \
+	mod_magickpp/unmod_magickpp.nsh \
+	mod_magickpp/main.cpp \
+	mod_magickpp/Makefile.am \
+	mod_magickpp/mod_magickpp.nsh \
+	mod_magickpp/trgt_magickpp.cpp
+
+sysconf_DATA = synfig_modules.cfg

_service:obs_scm:synfig-1.5.3.obscpio/synfig-core/src/modules/lyr_std/Makefile.am Added

@@ -0,0 +1,73 @@
+MAINTAINERCLEANFILES = \
+	Makefile.in
+
+AM_CPPFLAGS = \
+	-I$(top_builddir) \
+	-I$(top_srcdir)/src
+
+
+moduledir = @MODULE_DIR@
+
+module_LTLIBRARIES = liblyr_std.la
+
+liblyr_std_la_SOURCES = \
+	main.cpp \
+	timeloop.cpp \
+	timeloop.h \
+	perspective.cpp \
+	perspective.h \
+	xorpattern.cpp \
+	booleancurve.h \
+	booleancurve.cpp \
+	bevel.cpp \
+	bevel.h \
+	shade.cpp \
+	shade.h \
+	twirl.cpp \
+	twirl.h \
+	stretch.cpp \
+	stretch.h \
+	xorpattern.h \
+	clamp.cpp \
+	clamp.h \
+	supersample.cpp \
+	supersample.h \
+	insideout.cpp \
+	insideout.h \
+	julia.cpp \
+	julia.h \
+	rotate.cpp \
+	rotate.h \
+	mandelbrot.cpp \
+	mandelbrot.h \
+	zoom.h \
+	zoom.cpp \
+	import.cpp \
+	import.h \
+	translate.h \
+	translate.cpp \
+	sphere_distort.h \
+	sphere_distort.cpp \
+	curvewarp.cpp \
+	curvewarp.h \
+	stroboscope.cpp \
+	stroboscope.h \
+	freetime.cpp \
+	freetime.h
+
+liblyr_std_la_CXXFLAGS = \
+	@SYNFIG_CFLAGS@
+
+liblyr_std_la_LIBADD = \
+	../../synfig/libsynfig.la \
+	@SYNFIG_LIBS@
+
+liblyr_std_la_LDFLAGS = \
+	-module \
+	-no-undefined \
+	-avoid-version
+
+
+EXTRA_DIST = \
+	lyr_std.nsh \
+	unlyr_std.nsh

_service:obs_scm:synfig-1.5.3.obscpio/synfig-core/src/modules/synfig_modules.cfg.in Added

_service:obs_scm:synfig-1.5.3.obscpio/synfig-studio/brushes/CD_concept/Makefile.am Added

_service:obs_scm:synfig-1.5.3.obscpio/synfig-studio/brushes/Makefile.am Added

_service:obs_scm:synfig-1.5.3.obscpio/synfig-studio/build_tools/Makefile.am Added

_service:obs_scm:synfig-1.5.3.obscpio/synfig-studio/doxygen.cfg.in Added

@@ -0,0 +1,2564 @@
+# Doxyfile 1.8.20
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value value, ...
+# For lists, items can also be appended using:
+# TAG += value value, ...
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the configuration
+# file that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# https://www.gnu.org/software/libiconv/ for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = @PACKAGE@
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         = @VERSION@
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = doc
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all generated output in the proper direction.
+# Possible values are: None, LTR, RTL and Context.
+# The default value is: None.
+
+OUTPUT_TEXT_DIRECTION  = None
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = NO
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line
+# such as
+# /***************
+# as being the beginning of a Javadoc-style comment "banner". If set to NO, the
+# Javadoc-style will behave just like regular comments and it will not be
+# interpreted by doxygen.
+# The default value is: NO.
+
+JAVADOC_BANNER         = NO
+

_service:obs_scm:synfig-1.5.3.obscpio/synfig-studio/plugins/lottie-exporter/properties/shapePropKeyframe/Makefile.am Added

Changes of Revision 32