Packman Build Service PMBS

ffhevc.changes Changed

ffhevc.spec Changed

ffhevc-3.1.3.tar.gz/ChangeLog -> ffhevc-3.1.4.tar.gz/ChangeLog Changed

ffhevc-3.1.3.tar.gz/ffhevc -> ffhevc-3.1.4.tar.gz/ffhevc Changed

@@ -2,8 +2,8 @@
 #
 # Small script to encode to H.265/HEVC video using FFmpeg and libx265.
 # Author: Grozdan "microchip" Nikolov <neutrino8@opensuse.org>
-# Version: 3.1.3
-# Date: 2017-01-13
+# Version: 3.1.4
+# Date: 2017-01-15
 #
 # ffhevc is free software ; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -24,7 +24,7 @@
 brown() { echo -e "\e[0;33m$1\e[0;39;49m"; }
 error() { echo -e "\e[1;31m$1\e[0;39;49m"; }
 
-version="3.1.3"
+version="3.1.4"
 
 CFG="$HOME/.ffhevc"
 cfgversion="34"
@@ -528,8 +528,9 @@
 				;;
 			esac
 			case "$1" in
-				mp4) green "-> ac3|eac3|dts|aac|fdk-aac|mp3|vorbis|flac|copy" ;;
-				mov) green "-> ac3|eac3|dts|aac|fdk-aac|mp3|vorbis|copy" ;;
+				mp4) 		green "-> ac3|eac3|dts|aac|fdk-aac|mp3|vorbis|flac|copy" ;;
+				mov)		green "-> ac3|eac3|dts|aac|fdk-aac|mp3|vorbis|alac|copy" ;;
+				ts|mts|m2ts)	green "-> ac3|eac3|truehd|dts|aac|fdk-aac|mp3|vorbis|flac|copy" ;;
 				other)
 				error "-> HEVC video not supported by the $i container!"
 				error "-> Supported containers are: mkv, mp4, mov, m2ts, mts and ts"
@@ -553,9 +554,10 @@
 				exit 1
 			fi
 			case "$i" in
-				mkv|m2ts|ts)	green "-> Note: additional container $i supports all the audio codecs" ;;
+				mkv)		green "-> Note: additional container $i supports all the audio codecs" ;;
 				mp4)		container_func mp4 ;;
 				mov)		container_func mov ;;
+				ts|mts|m2ts)	container_func ts ;;
 				*)		container_func other ;;
 			esac
 		done
@@ -625,8 +627,8 @@
 		echo " 2 -> atadenoise    (adaptive temporal denoiser)"
 		echo
 		printf "Which Denoiser to use? [default is 0]: "
-		read dfilter
-		case "$dfilter" in
+		read dnopt
+		case "$dnopt" in
 			0|"")
 			printf "Specify the hqdn3d denoise values [default is 3:2:4]: "
 			read dvalues
@@ -672,8 +674,8 @@
 		echo " 3 -> pp7"
 		echo
 		printf "Specify the Deblock Filter [default is 3]: "
-		read dbfilter
-		case "$dbfilter" in
+		read dbopt
+		case "$dbopt" in
 			0)
 			printf "Specify the Deblock Parameters [quality(0-6):qp - default is 3:11]: "
 			read dp
@@ -827,8 +829,8 @@
 		echo " 4 -> 180°"
 		echo
 		printf "Specify the Transpose filter option [default is 0]: "
-		read trans
-		case "$trans" in
+		read transopt
+		case "$transopt" in
 			0|"")	rotate="transpose=0," ;;
 			1)	rotate="transpose=1," ;;
 			2)	rotate="transpose=2," ;;
@@ -1009,7 +1011,6 @@
 		printf "Specify the Field Parity of the Input File [tff/bff - default is $defpar]: "
 		read parity
 		test -z "$parity" && interlaced=":interlaced=$defpar" || interlaced=":interlaced=$parity"
-		X265PARAMS="$X265PARAMS$interlaced"
 	fi
 fi
 
@@ -1083,8 +1084,8 @@
 			echo " 9 -> Natural Bicubic Spline"
 			echo
 			printf "Sepcify the Software Scaler [default is 9]: "
-			read swscaler
-			case "$swscaler" in
+			read swsopt
+			case "$swsopt" in
 				0)	scaler="fast_bilinear" ;;
 				1)	scaler="bilinear" ;;
 				2)	scaler="bicubic" ;;
@@ -1124,8 +1125,8 @@
 		echo " 7 -> Undefined"
 		echo
 		printf "Specify the Color Primaries [default is 7]: "
-		read colprim
-		case "$colprim" in
+		read cpopt
+		case "$cpopt" in
 			0)	matrix="smpte170m"; prim="smpte170m"; transfer="smpte170m" ;;
 			1)	matrix="bt470bg"; prim="bt470bg"; transfer="bt470bg" ;;
 			2)	matrix="bt709"; prim="bt709"; transfer="bt709" ;;
@@ -1139,7 +1140,7 @@
 			exit 1
 			;;
 		esac
-		case "$colprim" in
+		case "$cpopt" in
 			[3-6])
 			printf "Use SMPTE-ST-2084 Transfer Characteristics? [y/N]: "
 			read smpte
@@ -1193,7 +1194,7 @@
 			echo " 0 -> fps (converts by duplicating/dropping of frames)"
 			echo " 1 -> setpts + atempo (converts by PTS + audio speedup/down)"
 			echo
-			printf "Specify the FPS conversion method [default is 0]: "
+			printf "Specify the FPS Conversion Method [default is 0]: "
 			read fcm
 			case "$fcm" in
 				0|1|"") true ;;
@@ -1579,6 +1580,7 @@
 		echo " MP3 -----> Channels Support: 2 (codec max)"
 		echo " TrueHD --> Channels Support: 6 (encoder max)"
 		echo " FLAC ----> Channels Support: 8 (codec max)"
+		echo " ALAC ----> Channels Support: 8 (codec max)"
 		echo " PCM -----> Channels Support: 8 (ffmpeg max)"
 		echo " COPY ----> Channels Support: depends on audio codec"
 	else
@@ -1663,6 +1665,13 @@
 			abrdef[i]="5"
 			skiptfs="1"
 			;;
+			alac)
+			acdc[i]="alac"
+			ameta[i]="ALAC"
+			abropts[i]="0-8"
+			abrdef[i]="5"
+			skiptfs="1"
+			;;
 			pcm)
 			ameta[i]="PCM"
 			skiptfs="1"
@@ -1702,13 +1711,18 @@
 			exit 1
 		}
 		
-		# mkv/m2ts/mts/ts are missing from the list since they
-		# support all the audio codecs supported by the script
+		# mkv is missing from the list since it supports
+		# all the audio codecs supported by the script
 		for c in $CONFMT $remuxcon; do
 			case "$c" in
+				ts|mts|m2ts)
+				case "${acodec[i]}" in
+					alac|opus) conerror_func ;;
+				esac
+				;;
 				mp4)
 				case "${acodec[i]}" in
-					pcm|opus|truehd) conerror_func ;;
+					pcm|opus|truehd|alac) conerror_func ;;
 				esac
 				;;
 				mov)
@@ -1736,8 +1750,9 @@
 				esac
 				audprofile[i]="-profile:a:${audindex[i]} ${aacprof[i]} -afterburner:a:${audindex[i]} 1"
 				;;
-				flac)
-				printf "Track $i: Specify the FLAC Compression Level [${abropts[i]} - default is ${abrdef[i]}]: "
+				flac|alac)
+				test "${acodec[i]}" = "flac" && cdcname[i]="FLAC" || cdcname[i]="ALAC"
+				printf "Track $i: Specify the ${cdcname[i]} Compression Level [${abropts[i]} - default is ${abrdef[i]}]: "
 				read abr[i]
 				test -z "${abr[i]}" && acomplevel[i]="${abrdef[i]}" || acomplevel[i]="${abr[i]}"
 				audcomplevel[i]="-compression_level:a:${audindex[i]} ${acomplevel[i]}"
@@ -1770,7 +1785,7 @@
 			
 			case "${acodec[i]}" in
 				ac3|eac3|"")			chanrange[i]="1-6"; defchan[i]="6" ;;
-				aac|opus|vorbis|flac|pcm)	chanrange[i]="1-8"; defchan[i]="8" ;;
+				aac|opus|vorbis|flac|alac|pcm)	chanrange[i]="1-8"; defchan[i]="8" ;;
 				mp3)				chanrange[i]="1-2"; defchan[i]="2" ;;
 				truehd)				chanrange[i]="2/5/6"; defchan[i]="6" ;;
 				dts)				chanrange[i]="1/2/4/5/6"; defchan[i]="6" ;;
@@ -1793,9 +1808,22 @@
 				printf "Track $i: Use Quad or 4.0 Layout? [quad/4.0 - default is quad]: "
 				read acl
 				case "$(echo "$acl" | tr '[:upper:]' '[:lower:]')" in
-					quad|"") achmeta[i]="4.0"; test "${acdc[i]}" = "dca" && chlayout[i]="quad(side)" || chlayout[i]="quad" ;;
+					quad|"")
+					case "${acodec[i]}" in
+						dts)	chlayout[i]="quad(side)" ;;
+						alac)
+						echo

Changes of Revision 37