Packman Build Service PMBS

Changes of Revision 20

ffhevc.changes Changed

@@ -1,4 +1,215 @@
 -------------------------------------------------------------------
+Wed Nov 16 09:02:00 UTC 2016 - neutrino8@opensuse.org
+
+- Update to version 3.0.2
+  * Added support for 3-pass encoding
+  * Added support for setting a default audio codec in the config
+    file. Bumps up config file version to 32
+  * Moved setting the video bitrate before the video filters
+  * More variables renamings and other small code tweaks
+  * Do some checking on duplicate entries when using additional
+    containers and warn and exit
+  * Updated the man page
+
+-------------------------------------------------------------------
+Mon Nov 14 09:18:00 UTC 2016 - neutrino8@opensuse.org
+
+- Update to version 3.0.1
+  * Set default amount of subtitles to 1 instead of exiting when no
+    value is given
+  * Allow the user to choose the amount of audio tracks he wants at
+    run time instead of requiring it to be set in the config file.
+    This removes config file var MAX_AUD_TRACKS and bumps up version
+    to 31
+  * Renamed array variables audmapval and submapval to audindex and
+    subindex since we're not mapping but specifying the audio/sub
+    index id with these vars
+  * Fixed a possible case where audio params weren't cleared in
+    case the nosound option was chosen
+  * Removed an if conditional checking for MAX_SUBS which no longer
+    is used
+
+-------------------------------------------------------------------
+Sun Nov 13 11:36:00 UTC 2016 - neutrino8@opensuse.org
+
+- Update to version 3.0.0
+  * Added support for batch encoding mode, to be activated with the
+    new -b option. It's used to encode directories with video files
+  * Renamed variable $mode to $encmode for clarity
+  * Reworked the input/output code
+  * Disabled strong-intra-smoothing in the default x265 options
+    in the config file
+  * Instead of relying on a config var to set the subtitles amount
+    to support, ask the user each time to provide it. Makes the
+    code less complex and easier to extend in the future. Bumps up
+    config file version to 30
+  * Check if the X265PARAMS var is missing from config in case we're
+    not using an x265 preset
+  * Updated the man page
+
+-------------------------------------------------------------------
+Sat Nov 12 10:48:00 UTC 2016 - neutrino8@opensuse.org
+
+- Update to version 2.9.9
+  * Added support for importing external srt/ssa subtitles for the
+    mkv, m2ts, mts and ts containers
+  * Moved the subtitle code into its own video_subtitles_func()
+    function
+  * Added support for simultaneously copying subtitles from the
+    input file and copying external ones
+  * Renamed variable SUBT to SUBNR for clarity
+  * Updated the README file and man page
+
+-------------------------------------------------------------------
+Thu Nov 10 21:15:00 UTC 2016 - neutrino8@opensuse.org
+
+- Update to version 2.9.8
+  * Check if name of input file matches that of output file and warn
+    and exit. Requires the realpath utility
+  * Added support for the m2ts, mts and ts containers
+  * Merged the code that checks if an audio codec is supported by a
+    container with that that checks for additional output containers.
+    Removes code duplication and maintainability
+  * Update to the audio sample rates. Sync them with
+    ffmpeg -h encoder=<encoder>
+  * Restrict TrueHD channels to 2, 5 and 6 as that's what the encoder
+    supports
+  * Updated the README file
+
+
+-------------------------------------------------------------------
+Wed Nov 09 07:00:00 UTC 2016 - neutrino8@opensuse.org
+
+- Update to version 2.9.7
+  * Renamed config var CON to CONFMT. Updates config file version
+    to 29
+  * Reduced some duplication in the audio codec checks for the
+    container formats
+  * Reduced some error message duplication when checking if an
+    additional container supports an audio codec
+  * Rework to the additional container selection code
+  * Added color functions for the additional container conversion
+  * Added back support for the MOV container
+
+-------------------------------------------------------------------
+Tue Nov 08 10:10:00 UTC 2016 - neutrino8@opensuse.org
+
+- Update to version 2.9.6
+  * Added support for encoding to TrueHD audio. Requires a very
+    recent ffmpeg version, preferably latest from git
+  * Some small improvements to the additional container output
+  * Moved the video_deinterlace_func() function inside the actual
+    deinterlace code
+  * Update to the README file
+  * Update to the man page
+
+-------------------------------------------------------------------
+Mon Nov 07 16:25:00 UTC 2016 - neutrino8@opensuse.org
+
+- Update to version 2.9.5
+  * Cosmetics in the code for deinterlacing
+  * Instead of skipping FPS conversion if the FPS can't be detected,
+    ask the user to provide it
+  * Use single brackets instead of double ones in the nosound
+    setup code
+  * Added license snippet at the top of the script
+  * Added support for outputting to additional container formats
+  * Do some checking on supported audio codecs for the supported
+    containers
+  * Check specified container and warn and exit if it's not supported
+  * Support setting the FLAC compression level
+  * Break out of the if conditionals in the audio code and replace
+    them with two case statements
+  * Update to the README file
+  
+-------------------------------------------------------------------
+Sun Nov 06 09:52:00 UTC 2016 - neutrino8@opensuse.org
+
+- Update to version 2.9.4
+  * Bugfix: resampling wasn't working for fdk-aac due to missing
+    value in the case statement
+  * Check if output file exists and if so, move it to $file.old
+  * Use test directly instead of an if condition to set the audio
+    filters
+  * Support bitrate calculations for target file size when doing
+    audio copy
+  * Use fdk* in the case statements for easier typing
+  * Renamed variable astrm to astream for clarity
+  * Use [1-2]p in the case statements for passmodes instead of 1p|2p
+  * New function, video_field_parity_func(), to detect and report the
+    interlace field order. Used by motion-compensation deinterlacing
+    and interlaced encoding
+  * Detect and display audio sample rate in case resampling is chosen
+  * Improvements to the video_fps_func() function. Get the FPS value
+    directly instead of outputting to a file and reading it
+
+-------------------------------------------------------------------
+Sat Nov 05 10:56:00 UTC 2016 - neutrino8@opensuse.org
+
+- Update to version 2.9.3
+  * Use a single var, $ofps, to set the output FPS for both
+    deinterlace bobbing and FPS conversion
+  * Use new $bob var to indicate that we do bobbing and use that
+    var to disable FPS conversion
+  * Renamed $fp var in video_deinterlace_func() to $fpar
+  * Print a warning message that FPS conversion gets disabled if
+    the user chooses audio copy
+  * Added support for the FDK-AAC audio codec. Requires ffmpeg
+    to be compiled with libfdk-aac support
+  * Support FPS conversion with the 'fps' filter
+  * Some minor code optimizations
+
+-------------------------------------------------------------------
+Fri Nov 04 10:43:00 UTC 2016 - neutrino8@opensuse.org
+
+- Update to version 2.9.2
+  * Bugfix: the scale variable was used twice for different things
+    causing an overwrite of the scale filter parameters, which
+    eventually results in ffmpeg complaining and exiting
+  * Added support for NTSC <-> NTSC and NTSC <-> PAL frame rate
+    conversions
+  * New var in config file, VID_FPS_CONVERT, to enable/disable
+    FPS conversion. Bumps up config file version to 28
+  * Moved the FPS detection code into its own function so it can
+    be easily reused
+  * Minor cosmetics
+  * Updated the README file
+
+-------------------------------------------------------------------
+Thu Nov 03 15:29:00 UTC 2016 - neutrino8@gmail.com
+
+- Update to version 2.9.1
+  * Added support for interlace-aware encoding
+  * Added support for the spp, uspp and pp7 deblockers
+  * Support asking for software scaler during exec time
+  * Added new SCALE var to the config file to enable/disable
+    support for software scaling. Bumps up the config file
+    version to 27
+  * Do a test write to see if output directory is writable by
+    the script executing user
+  * Updated the README file
+
+-------------------------------------------------------------------
+Wed Nov 02 19:40:00 UTC 2016 - neutrino8@gmail.com
+
+- Update to version 2.9.0
+  * Added support for motion compensation deinterlacing for both
+    deinterlacing at original FPS and bobbing
+  * Use denoise var instead of denoiser for the denoise filters
+    and rotate var instead of transpose for the transpose filter
+  * Added support for deblocking with the fspp filter. This bumps
+    up the config file version to 26
+  * Update to the README file
+  
+-------------------------------------------------------------------
+Tue Nov 01 00:35:00 UTC 2016 - neutrino8@gmail.com
+
+- Update to version 2.8.9
+  * Added support for bobbing (deinterlace at double FPS)
+  * Cosmetics: add menu header to the Color Primaries option
+  
+-------------------------------------------------------------------
+=======
 Mon Nov 14 09:18:00 UTC 2016 - neutrino8@opensuse.org
 
 - Update to version 3.0.1
@@ -196,6 +407,7 @@
   * Cosmetics: add menu header to the Color Primaries option
   
 -------------------------------------------------------------------
+>>>>>>> ./ffhevc.changes.r2
 Tue Oct 18 20:26:00 UTC 2016 - neutrino8@gmail.com
 
 - Add changes file

ffhevc.spec Changed

ffhevc-3.0.1.tar.gz/ChangeLog -> ffhevc-3.0.2.tar.gz/ChangeLog Changed

ffhevc-3.0.1.tar.gz/ffhevc -> ffhevc-3.0.2.tar.gz/ffhevc Changed

@@ -2,8 +2,8 @@
 #
 # Small script to encode to H.265/HEVC video using FFmpeg and libx265.
 # Author: Grozdan "microchip" Nikolov <neutrino8@opensuse.org>
-# Version: 3.0.1
-# Date: 2016-11-14
+# Version: 3.0.2
+# Date: 2016-11-16
 #
 # ffhevc is free software ; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -23,10 +23,10 @@
 brown() { echo -e "\e[0;33m$1\e[0;39;49m"; }
 error() { echo -e "\e[1;31m$1\e[0;39;49m"; }
 
-version="3.0.1"
+version="3.0.2"
 
 CFG="$HOME/.ffhevc"
-cfgversion="31"
+cfgversion="32"
 
 genconfig_func() {
 cat<<EOF>>"$CFG"
@@ -44,7 +44,7 @@
 
 # Container format extension
 # Leave empty to ask each time
-CONFMT="mkv"
+CONFMT=""
 
 # Nice value (0-19)
 NICE="19"
@@ -90,6 +90,10 @@
 AUD_VOLUME="y"
 AUD_RESAMPLE="y"
 
+# Set a default audio codec
+# Leave empty to ask each time
+DEFAULT_AUD_CODEC=""
+
 # Enable subtitles support?
 # Note: not all containers support
 # all types of subs!
@@ -127,7 +131,7 @@
 		;;
 		m)
 		case "$OPTARG" in
-			[1-2]p|crf) true ;;
+			[1-3]p|crf) true ;;
 			*)
 			error "-> Invalid mode!"
 			error "-> Use: $(basename $0) -h"
@@ -144,7 +148,7 @@
 			error "-> No such file!"
 			exit 1
 		fi
-		PRSTFILE="$OPTARG"
+		PRESETFILE="$OPTARG"
 		;;
 		p)
 		case "$OPTARG" in
@@ -187,6 +191,7 @@
 		echo "      defaults to crf mode. Valid pass modes are:"
 		echo "          1p  (1-pass mode)"
 		echo "          2p  (2-pass mode)"
+		echo "          3p  (3-pass mode)"
 		echo "          crf (constant rate factor mode)"
 		echo
 		brown " -b"
@@ -288,9 +293,9 @@
 	source "$CFG"
 fi
 
-if [ ! -z "$PRSTFILE" ]; then
+if [ ! -z "$PRESETFILE" ]; then
 	if [ ! -z "$vpreset" ]; then
-		if [ ! -z "$(grep '^X265PARAMS' "$PRSTFILE")" ]; then
+		if [ ! -z "$(grep '^X265PARAMS' "$PRESETFILE")" ]; then
 			error "-> x265 presets/tune profiles are mutually exclusive with custom presets!"
 			error "-> If you want to use a custom configuration file, don't add or comment"
 			error "   out the X265PARAMS variable in it. Then you can use the built-in"
@@ -299,14 +304,14 @@
 			exit 1
 		fi
 	else
-		if [ -z "$(grep '^X265PARAMS' "$PRSTFILE")" ]; then
+		if [ -z "$(grep '^X265PARAMS' "$PRESETFILE")" ]; then
 			error "-> The X265PARAMS variable is commented out or missing in your file!"
 			error "-> Please at least add to the file: X265PARAMS=\"ref=4\" (for example)"
 			echo
 			exit 1
 		fi
 	fi
-	source "$PRSTFILE"
+	source "$PRESETFILE"
 else
 	if [ -z "$vpreset" ]; then
 		if [ -f "$CFG" -a -z "$(grep '^X265PARAMS' "$CFG")" ]; then
@@ -358,12 +363,14 @@
 	echo
 	exit 1
 else
-	mkdir -p "$OUTDIR" 2>/dev/null
-	if [ $? != 0 ]; then
-		error "-> Could not create the output directory!"
-		error "-> Check your config in '$CFG'"
-		echo
-		exit 1
+	if [ ! -d "$OUTDIR" ]; then
+		mkdir -p "$OUTDIR" 2>/dev/null
+		if [ $? != 0 ]; then
+			error "-> Could not create the output directory!"
+			error "-> Check your config in '$CFG'"
+			echo
+			exit 1
+		fi
 	fi
 fi
 
@@ -417,7 +424,7 @@
 fi
 
 # Check if output dir is writable
-WRITE="$(dirname "$OUTPUT")/.ff_writable$$"
+WRITE="$(dirname "$OUTPUT")/.$(basename $0)_writable$$"
 touch "$WRITE" 2>/dev/null
 if [ $? != 0 ]; then
 	error "-> Specified output directory is not writable by user '$(id -un)'"
@@ -484,7 +491,7 @@
 if [ "$acf" = "y" -o "$acf" = "Y" ]; then
 	printf "Specify the Container Formats [example: mp4,mov,m2ts - press 'Enter' to skip]: "
 	read econ
-	test ! -z "$econ" && extracon="$(echo "$econ" | sed 's|,| |g' | tr '[:upper:]' '[:lower:]')"
+	test ! -z "$econ" && extracon="$(echo "$econ" | tr '[:upper:]' '[:lower:]' | tr '[:punct:]' ' ')"
 	if [ ! -z "$extracon" ]; then
 		container_func() {
 			case "$1" in
@@ -504,12 +511,19 @@
 			esac
 		}
 		
+		DUPS="$(echo -e "$extracon" | sed 's| |\n|g' | sort | uniq -d)"
+		if [ ! -z "$DUPS" ]; then
+			error "-> You provided a duplicate container entry!"
+			exit 1
+		fi
+		
 		for i in $extracon; do
+			echo
 			if [ "$i" = "$CONFMT" ]; then
-				error "-> Additional container matches the main output container!"
+				error "-> Additional container $i matches the main output container!"
+				echo
 				exit 1
 			fi
-			echo
 			case "$i" in
 				mkv|m2ts|ts)	green "-> Note: additional container $i supports all the audio codecs" ;;
 				mp4)		container_func mp4 ;;
@@ -557,7 +571,7 @@
 fi
 
 case "$encmode" in
-	[1-2]p)
+	[1-3]p)
 	printf "Specify the desired Video Bitrate in kbps [default is 5000]: "
 	read vbtr
 	test -z "$vbtr" && vbitrate="5000" || vbitrate="$vbtr"
@@ -673,6 +687,7 @@
 video_field_parity_func() {
 	echo
 	green "-> Detecting Field Parity..."
+	sleep 1
 	FPAR="$($FFPROBE -i "$input" -show_streams -select_streams v:0 -show_frames -read_intervals %+7 2>&1 | sed -n 's|^field_order=||p' | tail -1)"
 	case "$FPAR" in
 		t*|T*)	fp="tff"; fparity="Top Field First (TFF)" ;;
@@ -1081,15 +1096,12 @@
 				if [ ! -z "${subnr[i]}" ]; then
 					printf "Sub $i: Specify the 3-letter Language Code for Metadata [press 'Enter' to skip]: "
 					read slang[i]
-					if [ ! -z "${slang[i]}" ]; then
-						sublang[i]="-metadata:s:s:${subindex[i]} language=${slang[i]}"
-					fi
-					subcopy[i]="-map ${subnr[i]} -c:s:${subindex[i]} copy ${sublang[i]}"
+					test ! -z "${slang[i]}" && sublang[i]="-metadata:s:s:${subindex[i]} language=${slang[i]}"
 					# Workaround for an ffmpeg disposition issue
-					# where in some cases it sets subsequent tracks
+					# where in some cases it flags subsequent tracks
 					# as default.
 					test "$i" = "1" && sdis="default" || sdis="none"
-					subdis[i]="-disposition:s:${subindex[i]} $sdis"
+					subcopy[i]="-map ${subnr[i]} -c:s:${subindex[i]} copy ${sublang[i]} -disposition:s:${subindex[i]} $sdis"
 				else
 					error "-> No value given!"
 					exit 1
@@ -1144,17 +1156,14 @@
 				else
 					printf "Sub $i: Specify the 3-letter Language Code for Metadata [press 'Enter' to skip]: "
 					read slng[i]
-					if [ ! -z "${slng[i]}" ]; then
-						sublng[i]="-metadata:s:s:${subidx[i]} language=${slng[i]}"
-					fi
-					EXTSUBS[i]="-i \"${subfile[i]}\""
+					test ! -z "${slng[i]}" && sublng[i]="-metadata:s:s:${subidx[i]} language=${slng[i]}"
 					if [ ! -z "${subindex[*]}" ]; then
 						sdispo="none"
 					else
 						test "$i" = "1" && sdispo="default" || sdispo="none"
 					fi
-					subdispo[i]="-disposition:s:${subidx[i]} $sdispo"
-					subcpy[i]="-map $i:0 -c:s:${subidx[i]} copy ${sublng[i]}"
+					EXTSUBS[i]="-i \"${subfile[i]}\""
+					subcpy[i]="-map $i:0 -c:s:${subidx[i]} copy ${sublng[i]} -disposition:s:${subidx[i]} $sdispo"
 				fi
 			done
 		fi
@@ -1242,39 +1251,46 @@
 		test -z "${astream[i]}" && atrack[i]="0:1" || atrack[i]="${astream[i]}"
 		printf "Track $i: Specify the 3-letter Language Code for Metadata [press 'Enter' to skip]: "
 		read alang[i]
-		if [ ! -z "${alang[i]}" ]; then
-			audlang[i]="-metadata:s:a:${audindex[i]} language=${alang[i]}"
-		fi
+		test ! -z "${alang[i]}" && audlang[i]="-metadata:s:a:${audindex[i]} language=${alang[i]}"
 		audmap[i]="-map ${atrack[i]}"
 	done
 	
-	echo
-	brown " Available Audio Codecs"
-	brown " ~~~~~~~~~~~~~~~~~~~~~~"
-	echo " AC3 -----> Channels Support: 6 (codec max)"
-	echo " EAC3 ----> Channels Support: 6 (encoder max)"
-	echo " DTS -----> Channels Support: 6 (codec max)"
-	echo " AAC -----> Channels Support: 8 (ffmpeg max)"
-	echo " FDK-AAC -> Channels Support: 8 (ffmpeg max)"
-	echo " Opus ----> Channels Support: 8 (ffmpeg max)"
-	echo " Vorbis --> Channels Support: 8 (ffmpeg max)"
-	echo " MP3 -----> Channels Support: 2 (codec max)"
-	echo " TrueHD --> Channels Support: 6 (encoder max)"
-	echo " FLAC ----> Channels Support: 8 (codec max)"
-	echo " PCM -----> Channels Support: 8 (ffmpeg max)"
-	echo " COPY ----> Channels Support: depends on audio codec"
-	echo " NOSOUND -> Channels Support: N/A"
+	if [ -z "$DEFAULT_AUD_CODEC" ]; then
+		echo
+		brown " Available Audio Codecs"
+		brown " ~~~~~~~~~~~~~~~~~~~~~~"
+		echo " AC3 -----> Channels Support: 6 (codec max)"
+		echo " EAC3 ----> Channels Support: 6 (encoder max)"
+		echo " DTS -----> Channels Support: 6 (codec max)"
+		echo " AAC -----> Channels Support: 8 (ffmpeg max)"
+		echo " FDK-AAC -> Channels Support: 8 (ffmpeg max)"
+		echo " Opus ----> Channels Support: 8 (ffmpeg max)"
+		echo " Vorbis --> Channels Support: 8 (ffmpeg max)"
+		echo " MP3 -----> Channels Support: 2 (codec max)"
+		echo " TrueHD --> Channels Support: 6 (encoder max)"
+		echo " FLAC ----> Channels Support: 8 (codec max)"
+		echo " PCM -----> Channels Support: 8 (ffmpeg max)"
+		echo " COPY ----> Channels Support: depends on audio codec"
+		echo " NOSOUND -> Channels Support: N/A"
+	else
+		echo
+		green "-> Using default audio codec set in config file: $DEFAULT_AUD_CODEC"
+	fi
 	
 	for i in $(eval echo "{1..$ATRACKS}"); do
 		echo
 		# Workaround for an ffmpeg disposition issue
 		# where in some cases it flags subsequent
 		# tracks as default.
-		test "$i" = "1" && adis="default" || adis="none"
-		auddis[i]="-disposition:a:${audindex[i]} $adis"
+		test "$i" = "1" && adispo="default" || adispo="none"
+		auddispo[i]="-disposition:a:${audindex[i]} $adispo"
 		
-		printf "Track $i: Specify the Audio Codec [default is AC3]: "
-		read acodec[i]
+		if [ -z "$DEFAULT_AUD_CODEC" ]; then
+			printf "Track $i: Specify the Audio Codec [default is AC3]: "
+			read acodec[i]
+		else
+			acodec[i]="$DEFAULT_AUD_CODEC"
+		fi
 		acodec[i]="$(echo "${acodec[i]}" | tr '[:upper:]' '[:lower:]')"
 		case "${acodec[i]}" in
 			ac3|"")
@@ -1366,7 +1382,7 @@
 			# clear any audio options given
 			for t in $(eval echo "{1..$ATRACKS}"); do
 				audparams[t]=
-				auddis[t]=
+				auddispo[t]=
 			done
 			echo
 			error "-> NOSOUND chosen. Clearing all other audio options!"
@@ -1559,7 +1575,7 @@
 				printf "Track $i: Set the Audio Volume? [y/N]: "
 				read setavol[i]
 				if [ "${setavol[i]}" = "y" -o "${setavol[i]}" = "Y" ]; then
-					printf "Track $i: Specify the Audio Volume filter value in dB [-100-100 - default is 4.0]: "
+					printf "Track $i: Specify the Audio Volume value in dB [-100-100 - default is 4.0]: "
 					read avol[i]
 					test -z "${avol[i]}" && audvol[i]="4" || audvol[i]="${avol[i]}"
 					avolume[i]="volume=${audvol[i]}dB,"
@@ -1762,7 +1778,7 @@
 			test ! -z "${afilters[i]}" && audfilters[i]="-filter:a:${audindex[i]} ${afilters[i]}"
 		fi
 		
-		audparams[i]="${audmap[i]} -c:a:${audindex[i]} ${acdc[i]} ${audprofile[i]} ${audcomplevel[i]} ${audbtr[i]} ${audchan[i]} ${audfilters[i]} ${audlang[i]} ${audmeta[i]}"
+		audparams[i]="${audmap[i]} -c:a:${audindex[i]} ${acdc[i]} ${audprofile[i]} ${audcomplevel[i]} ${audbtr[i]} ${audchan[i]} ${audfilters[i]} ${audlang[i]} ${audmeta[i]} ${auddispo[i]}"
 	done
 fi
 
@@ -1773,7 +1789,7 @@
 fi
 
 case "$encmode" in
-	[1-2]p)
+	[1-3]p)
 	# Haven't found a reliable way to make it work with
 	# FLAC and PCM audio so just skip this if one of
 	# these audio codecs is chosen. Patch welcome
@@ -1843,6 +1859,7 @@
 case "$encmode" in
 	1p)	pass="1-pass" ;;
 	2p)	pass="2-pass" ;;
+	3p)	pass="3-pass" ;;
 	crf|"")	pass="CRF"; encmode="crf" ;;
 esac
 
@@ -1874,24 +1891,35 @@
 test ! -z "$COMMENT" && METACOMMENT="-metadata comment=\"$COMMENT\""
 
 encoder_func() {
-	OPTS1="${EXTSUBS[*]} -map 0:0 -disposition:v:0 default $ofps $NOSUBS $MDATA $CHPS $METATITLE $METAGENRE $METAYEAR $METACOMMENT $vfilters $sws"
+	VIDOPTS="${EXTSUBS[*]} -map 0:0 -disposition:v:0 default $ofps $NOSUBS $MDATA $CHPS $METATITLE $METAGENRE $METAYEAR $METACOMMENT $vfilters $sws"
 	case "$1" in
 		1p|crf)
 		test "$encmode" = "1p" && passone="bitrate=$vbitrate" || passone="crf=$CRF"
-		OPTS2="${audparams[*]} ${auddis[*]} ${subcopy[*]} ${subcpy[*]} ${subdis[*]} ${subdispo[*]} $strict $movflags $METACOVER \"$OUTPUT\""
+		OPTS1="${audparams[*]} ${subcopy[*]} ${subcpy[*]} $strict $movflags $METACOVER \"$OUTPUT\""
 		;;
 		2p)
 		passone="stats=\"${OUTFILE%.*}.log\":pass=1:bitrate=$vbitrate"
 		passtwo="stats=\"${OUTFILE%.*}.log\":pass=2:bitrate=$vbitrate"
+		OPTS1="-an -f null -y /dev/null"
+		OPTS2="${audparams[*]} ${subcopy[*]} ${subcpy[*]} $strict $movflags $METACOVER \"$OUTPUT\""
+		;;
+		3p)
+		passone="stats=\"${OUTFILE%.*}.log\":pass=1:bitrate=$vbitrate"
+		passtwo="stats=\"${OUTFILE%.*}.log\":pass=3:bitrate=$vbitrate"
+		OPTS1="-an -f null -y /dev/null"
 		OPTS2="-an -f null -y /dev/null"
-		OPTS3="${audparams[*]} ${auddis[*]} ${subcopy[*]} ${subcpy[*]} ${subdis[*]} ${subdispo[*]} $strict $movflags $METACOVER \"$OUTPUT\""
+		OPTS3="${audparams[*]} ${subcopy[*]} ${subcpy[*]} $strict $movflags $METACOVER \"$OUTPUT\""
 		;;
 	esac
-	echo "nice -n $NICE $FFMPEG -i \"$input\" $OPTS1 -c:v libx265 -x265-params $passone$X265PARAMS $OPTS2"
+	echo "nice -n $NICE $FFMPEG -i \"$input\" $VIDOPTS -c:v libx265 -x265-params $passone$X265PARAMS $OPTS1"
 	case "$1" in
-		2p)
+		2p|3p)
 		echo
-		echo "nice -n $NICE $FFMPEG -i \"$input\" $OPTS1 -c:v libx265 -x265-params $passtwo$X265PARAMS $OPTS3"
+		echo "nice -n $NICE $FFMPEG -i \"$input\" $VIDOPTS -c:v libx265 -x265-params $passtwo$X265PARAMS $OPTS2"
+		if [ "$1"  = "3p" ]; then
+			echo
+			echo "nice -n $NICE $FFMPEG -i \"$input\" $VIDOPTS -c:v libx265 -x265-params $passtwo$X265PARAMS $OPTS3"
+		fi
 		;;
 	esac
 }

ffhevc-3.0.1.tar.gz/ffhevc.1 -> ffhevc-3.0.2.tar.gz/ffhevc.1 Changed